dc1.dll, defrag, and locking computer

**magnethead** · 07-19-2009, 06:26 PM

My computer server has been locking up for the past 3 weeks. It got to the point where it wouldn't boot up without a windows error and checkdisk was running every time i turned the computer on.

I did a system repair with my XP disk and got it to boot, then did disk cleanup.

Now i'm trying to do a defrag, and it's fauling. First the analysing started faiing because of a file associated with Speedfan, so i uninstalled that. Now it's failing on "C:\recycled\dc1.dll"

The computer still locks up, but it takes a lot longer now than it did before.

When i ran the repair install, it refused to run setupdd.sys because of an incompatiable hardware..i removed one of the 256 sticks, and it progressed. Now i only have one 256 stick in the computer.

AMD Duron 1200 MHz
ASUS deluxe board
MX3000 gfx
20 GB hard drive

**magnethead** · 07-19-2009, 07:11 PM

And in a jinx, after i posted this, restarted, and tried again, it passed analysis and is now defraging, albeit slowly.

It's at 12% after roughly an hour or so.

07-19-2009, 06:26 PM	#1 (permalink)
magnethead Registered User Join Date: Mar 2006 Location: Texas, USA Posts: 3,570 OS: Vista ultimate 32bit My System Blog Entries: 3	dc1.dll, defrag, and locking computer My computer server has been locking up for the past 3 weeks. It got to the point where it wouldn't boot up without a windows error and checkdisk was running every time i turned the computer on. I did a system repair with my XP disk and got it to boot, then did disk cleanup. Now i'm trying to do a defrag, and it's fauling. First the analysing started faiing because of a file associated with Speedfan, so i uninstalled that. Now it's failing on "C:\recycled\dc1.dll" The computer still locks up, but it takes a lot longer now than it did before. When i ran the repair install, it refused to run setupdd.sys because of an incompatiable hardware..i removed one of the 256 sticks, and it progressed. Now i only have one 256 stick in the computer. AMD Duron 1200 MHz ASUS deluxe board MX3000 gfx 20 GB hard drive __________________ For proper support: what are you running? graphics, cpu, m/board, ram, PSU brand wattage PCI-E requires 26 amps at 12 volts. That's a 650W PSU. Power Supply Info and Selection . Info on thermal compounds & application . TEST PSU USING MULTI-METER . Bench Testing Your System

07-19-2009, 07:11 PM	#2 (permalink)
magnethead Registered User Join Date: Mar 2006 Location: Texas, USA Posts: 3,570 OS: Vista ultimate 32bit My System Blog Entries: 3	Re: dc1.dll, defrag, and locking computer And in a jinx, after i posted this, restarted, and tried again, it passed analysis and is now defraging, albeit slowly. It's at 12% after roughly an hour or so. __________________ For proper support: what are you running? graphics, cpu, m/board, ram, PSU brand wattage PCI-E requires 26 amps at 12 volts. That's a 650W PSU. Power Supply Info and Selection . Info on thermal compounds & application . TEST PSU USING MULTI-METER . Bench Testing Your System