Help=SETTINGS (TCP/IP???) dlinkDSL2540T

[RAMO1989]

I just changed the settings of my modem/router:
http://www.dlink.com.my/products/?idproduct=164
(( http://global.dlink.com.sg/site_pdtp...L-2540T_ds.pdf ))

with the help of:
http://www.portforward.com/english/routers...2540T
so I can use it, but it is still not working

could you please help me in setting my xp sp2, so i can use it for 100%??????
THANK YOU VERY MUCH (I don't understand the networking thing at all!) respect...

1. in modem menu I see this=>

DHCP:
DHCP Clients List
Number IP Address MAC Address
1 192.168.1.3


2. in LAN managmentis this:
Management IP
These are the IP settings of the LAN interface for the DSL-2540T. These setting may be referred to as Private settings. You may change the LAN IP address if needed.
IP Address 192.168.1.1
Subnet Mask 255.255.255.0


3. DNS Configuration
The DNS Configuration allows the user to set the configuration of DNS relay.
DNS Relay Selection Use auto discovered DNS server only
User Configuration:
Preferred DNS Server 202.188.0.133
Alternate DNS Server 202.188.1.5

4. Virtual server
LAN IP 192.168.1.3 (das ist die ich eingeben musste)

5. LAN Clients
IP Address
Host Name

Static Addresses Delete IP Address Host Names Type
192.168.1.3 Static

6. DMZ
DMZ (Demilitarized Zone) is used to allow a single computer on the LAN to be exposed to the Internet.
Disabled
IP Address: 0.0.0.0

7. and in XP local connection properties:
INTERNET PROTOCOL (TCP/IP):
Obtain an internet adress automaticilly
Obtain DNS server adresss automaticilly

[NeilF]

give your pc a fixed IP of 192.168.1.3