Router error 103

[carce001]

I have a same problem, but this form to repair, is not for me.
please help me.

my router indicate error 103.

[johnwill]

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Note: You will need to post complete details of your configuration and your specific issue in this new thread for us to help you.

Thanks for your cooperation.

[carce001]

my problem is that I have new hard disk, position all the OS (WIN XP sp2) and treatment to load my to router TEW-432BRP with the program including in the CD, but when this installing and verifying indicates to me that it finds a device of network but of internet(error 103), as if it did not have internet(and if I have it), ademas does not solicit that deactivates Zone Alarm program and the truth is that not even I have it installed.

[johnwill]

You don't need any software to use a broadband router such as the one you're trying to use. Put the CD in a place where it'll never be seen again and configure this manually.

Reset the router to factory defaults by holding the reset button down for 15 seconds with power on.

• Turn off everything, the modem, router, computer.
• Connect the modem to the router's WAN/Internet port.
• Connect the computer to one of the router's LAN/Network ports.
• Turn on the modem, wait for a steady connect light.
• Turn on the router, wait for two minutes.
• Boot the computer.

When the computer is completely booted, let's see this.

Hold the Windows key and press R, then type CMD to open a command prompt:

In the command prompt window that opens, type type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.

[carce001]

The text in this case is:

Configuración IP de Windows

Nombre del host . . . . . . . . . : carce
Sufijo DNS principal . . . . . . :
Tipo de nodo . . . . . . . . . . : desconocido
Enrutamiento habilitado. . . . . .: No
Proxy WINS habilitado. . . . . : No

Adaptador Ethernet Conexión de área local :

Sufijo de conexión específica DNS :
Descripción. . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit
Ethernet Controller
Dirección física. . . . . . . . . : 00-1E-8C-70-F7-0F
DHCP habilitado. . . . . . . . . : No
Autoconfiguración habilitada. . . : Sí
Dirección IP. . . . . . . . . . . : 192.168.1.100
Máscara de subred . . . . . . . . : 255.255.255.0
Puerta de enlace predeterminada : 192.168.1.1
Servidor DHCP . . . . . . . . . . : 192.168.1.1
Servidores DNS . . . . . . . . . .: 192.168.1.1
Concesión obtenida . . . . . . . : martes, 13 de mayo de 2008 19:48:26
Concesión expira . . . . . . . . .: martes, 20 de mayo de 2008 19:48:26

Adaptador Ethernet Conexiones de red inalámbricas :

Estado de los medios. . . .: medios desconectados
Descripción. . . . . . . . . . . : Realtek RTL8187 Wireless 802.11g 54M
bps USB 2.0 Network Adapter
Dirección física. . . . . . . . . : 00-15-AF-64-00-19

[johnwill]

Try turning on DHCP and it might work better.

Select Start > Settings > Network Connections.

• Double-click the Connection icon of the connection you wish to modify to open the Local Area Connection Status window.
• Click the Properties button to open the Local Area Connection Properties window.
• Click to highlight Internet Protocol (TCP/IP).
• Click the Properties button to open the Internet Protocol (TCP/IP) Properties window.
• TCP/IP Properties window, IP Address tab
• Select Obtain an IP address automatically.
• Select Obtain DNS server address automatically.
• Click OK to return to the Local Area Connection Properties window.
• Click OK to return to the Network Connections window.