Can no longer network?

[j_nkdds]

We have 3 computers, all running XP professional with service pack 3. We had a wired network through the modem/router provided for us by the cable company (how we get our internet). They had to replace it and ever since then we can no longer network. They all connect to the internet fine, and one computer recognizes one program on the main computer (the server for this particular program/software). But that is it. I ran the Network Wizard on all of them, using the same workgroup name, and allowing file/printer sharing. However when I click on 'view workgroup computers', only the computer I am on shows up.

The main thing I want to do is connect to the printers. What do I do?

TIA

[1ginman1]

What is the name/maker and version of the router? Login to the route and check to see if the router configuration is set up properly.

[johnwill]

Turn off any firewalls for debugging. If the firewall is the problem, you'll have to configure it to allow access to "trusted zone" addresses. Note that some firewalls must be completely uninstalled to stop them from affecting your networking.

Hold the Windows key and press R, then type CMD to open a command prompt.

In the command prompt window that opens, type type the following commands:

PING each remote computer by IP address, and if successful, PING by name. Open a command prompt as described above and type.

PING <ip address>
or
PING <computer name>

Where:
<ip address> - is the x.x.x.x IP address
<computer name> - is the computer name

A failure to PING is almost always a firewall configuration issue. Any failure to PING needs to be corrected before you go any farther.

Note: You can obtain the IP address and computer name of a computer by opening a command prompt (DOS window) and typing IPCONFIG /ALL. This should work for any Windows version. The IPCONFIG /ALL display will provide a wealth of useful information for debugging your network connection.

Check your Services are Started on all PCs:

• COM+ Event System (for WZC issues)
• Computer Browser
• DHCP Client
• DNS Client
• Network Connections
• Network Location Awareness
• Remote Procedure Call (RPC)
• Server
• TCP/IP Netbios helper
• Wireless Zero Configuration (XP wireless configurations)
• WLAN AutoConfig (Vista wireless configurations)
• Workstation

Note: You can check the services in Control Panel, Administrative Tools, Services.

All of these services should be started, and their startup type should be automatic.

If a service is not running, open it's properties and check the dependencies. Check each of the dependencies and see which one is preventing the service from running. Checking the event log is also a good idea here, there may be clues to what is failing.


All computers should be in the same workgroup for computer browsing to function properly. File & Print Sharing has to be enabled on any computer you wish to share files or printers from. You also need to actually share the resource in question from My Computer, right click on the drive/printer/folder, and select sharing.

If you encounter difficulties accessing computers that are visible in Network Places (Network and Sharing Center in Vista), make sure the computer being accessed has an account with the same name/password as the system connecting to it uses to login. NOTE: Vista's default is to require a password on the account to enable file/print sharing.








If you'd post the following information for each computer here, we may be able to offer some clues.


Hold the Windows key and press R, then type CMD to open a command prompt:

In the command prompt window that opens, type type the following commands, one at a time, followed by the Enter key:

Note that there is a space before the -n or the /ALL, but there is NOT a space after the - or / in the following commands.

NBTSTAT -n

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.