NO CONNECTION TO OTHERS PCs

[macnoeron]

Dear Sir,

I got a Frozen Throne Game, the problem is the computers (GAMERS) don't meet in the LOCAL NETWORK. Below is the result while pinging. Hope you can help us.

MAC R. ACUÑA

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\mac r acuna>ping 206.190.60.37

Pinging 206.190.60.37 with 32 bytes of data:

Request timed out.
Reply from 206.190.60.37: bytes=32 time=391ms TTL=54
Reply from 206.190.60.37: bytes=32 time=424ms TTL=54
Reply from 206.190.60.37: bytes=32 time=403ms TTL=54

Ping statistics for 206.190.60.37:
Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
Approximate round trip times in milli-seconds:
Minimum = 391ms, Maximum = 424ms, Average = 406ms

C:\Documents and Settings\mac r acuna>ping yahoo.com

Pinging yahoo.com [68.180.206.184] with 32 bytes of data:

Reply from 68.180.206.184: bytes=32 time=259ms TTL=54
Reply from 68.180.206.184: bytes=32 time=262ms TTL=53
Reply from 68.180.206.184: bytes=32 time=261ms TTL=53
Reply from 68.180.206.184: bytes=32 time=258ms TTL=54

Ping statistics for 68.180.206.184:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 258ms, Maximum = 262ms, Average = 260ms

C:\Documents and Settings\mac r acuna>NBTSTA -n
'NBTSTA' is not recognized as an internal or external command,
operable program or batch file.

C:\Documents and Settings\mac r acuna>NBSTAT -n
'NBSTAT' is not recognized as an internal or external command,
operable program or batch file.

C:\Documents and Settings\mac r acuna>nbtstat -N

Hamachi:
Node IpAddress: [5.27.157.54] Scope Id: []

NetBIOS Local Name Table

Name Type Status
---------------------------------------------
1COMPUTER <00> UNIQUE Registered
DUSHBUG <00> GROUP Registered
1COMPUTER <20> UNIQUE Registered

Local Area Connection:
Node IpAddress: [192.168.0.162] Scope Id: []

NetBIOS Local Name Table

Name Type Status
---------------------------------------------
1COMPUTER <00> UNIQUE Registered
DUSHBUG <00> GROUP Registered
1COMPUTER <20> UNIQUE Registered

C:\Documents and Settings\mac r acuna>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : 1computer
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Hamachi:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hamachi Network Interface
Physical Address. . . . . . . . . : 7A-79-05-1B-9D-36
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : No
IP Address. . . . . . . . . . . . : 5.27.157.54
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 5.0.0.1
Lease Obtained. . . . . . . . . . : Wednesday, September 17, 2008 4:25:5
5 AM
Lease Expires . . . . . . . . . . : Wednesday, September 17, 2008 4:26:2
5 AM

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethe
rnet NIC
Physical Address. . . . . . . . . : 00-02-44-0E-F7-A0
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.0.162
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 58.69.254.72
58.69.254.137
Lease Obtained. . . . . . . . . . : Tuesday, September 16, 2008 9:53:53
PM
Lease Expires . . . . . . . . . . : Tuesday, September 23, 2008 9:53:53
PM

C:\Documents and Settings\mac r acuna>

[NoReason]

Not sure what the question here is.... How to play this game online? do you have a Battle.net account?

[macnoeron]

Frozen Throne is not a On-line game, its a LAN Game.

[NoReason]

So what is the question you're trying to ask?

[macnoeron]

1 PC cant connect to the other PC to play the game (Frozen Throne). Hope you can help me solve the problem.

[johnwill]

Do the machines connect for file sharing?


Turn off any firewalls for debugging. If the firewall is the problem, you'll have to configure it to allow access to "trusted zone" addresses. Note that some firewalls must be completely uninstalled to stop them from affecting your networking.

Hold the Windows key and press R, then type CMD to open a command prompt.

In the command prompt window that opens, type type the following commands:

PING each remote computer by IP address, and if successful, PING by name. Open a command prompt as described above and type.

PING <ip address>
or
PING <computer name>

Where:
<ip address> - is the x.x.x.x IP address
<computer name> - is the computer name

A failure to PING is almost always a firewall configuration issue. Any failure to PING needs to be corrected before you go any farther.

Note: You can obtain the IP address and computer name of a computer by opening a command prompt (DOS window) and typing IPCONFIG /ALL. This should work for any Windows version. The IPCONFIG /ALL display will provide a wealth of useful information for debugging your network connection.

Check your Services are Started on all PCs:

• COM+ Event System (for WZC issues)
• Computer Browser
• DHCP Client
• DNS Client
• Network Connections
• Network Location Awareness
• Remote Procedure Call (RPC)
• Server
• TCP/IP Netbios helper
• Workstation

Note: You can check the services in Control Panel, Administrative Tools, Services.

All of these services should be started, and their startup type should be automatic.

All computers should be in the same workgroup for computer browsing to function properly. File & Print Sharing has to be enabled on any computer you wish to share files or printers from. You also need to actually share the resource in question from My Computer, right click on the drive/printer/folder, and select sharing.

If you encounter difficulties accessing computers that are visible in Network Neighborhood, make sure the computer being accessed has an account with the same name/password as the system connecting to it uses to login.

While the default NetBIOS setting is correct for normal network configurations, it's possible for it to be altered, and it costs nothing to make sure it's correct. NETBIOS over TCP/IP must be enabled for normal network browsing.