network

[birdman1]

hi there,can anyone tell me if I have set up my network right,still willnot connect to the internet,I have a belkin ADSL modem with built in 802.11g wireless router,connected to my main computer by ethnet cable,can get internet ok, my second computer has a netger 108 mbps wireless pci adaptor wg311t,all set up right,have the icon in the task bar on green,but still I keep getting no network or internet connection on my second computer,its outside in the outhouse,not to far off,less than 30feet,any help please,birdman1

[matt261102]

Can you do an ipconfig /all and paste the results here?

[birdman1]

hi thankyou for the info, will try it out and get back to you,regards birdman1

[lazareth1]

Go into the router configuration and check if encryption is enabled. If it is, then you need the encryption 'key' for the wireless to work.

[birdman1]

ok will try that,regards birdman

[johnwill]

Please supply the following info, exact make and models of the equipment please.

What country are you located in.
Name of your ISP (Internet Service Provider).
What is the expected Upstream/Downstream speed for your ISP Connection?
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Make and model of your computer.
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP1-SP2, Vista, etc.
The Internet Browser in use, IE, Firefox, Opera, etc.




Please give an exact description of your problem symptoms, including the exact text of any error messages.

If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?

If there are other computers on the same network, are they experiencing the same issue, or do they function normally?




On any affected computer, I'd also like to see this:

Hold the Windows key and press R, then type CMD to open a command prompt:

Type the following commands:

PING 216.109.112.135

PING yahoo.com

NBTSTAT -n

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.

[birdman1]

thankyou for all your help,things are ok at last,birdman1

[Done_Fishin]

Can you let us know what got it going ??

what tweaks did you do, if any ??