I think I know, but want some input from others.

[TheOnlyGonzo]

I have two network cards in my desktop. One is wired (Intel Pro/100 VE Integrated Controller) and one wireless (Broadcom 802.11g). I usually connect to my network thru the wired connection and have the wireless disabled. Just a few days ago, the wired connection would not connect. It would always get the default address when Windows can not contact a DHCP server. The DHCP server is running and working, because both of my laptops will connect without any issue.
Once I disable the wired connection and enable the wireless connection there is no issues connecting to the network or the internet.
So I decided to update the drivers for the wired connection which was way out of date ( I usually dont try and fix what is not broken ). Once I did that, the wired connection will contact the DHCP server and get a legitimate address, but will not connect to the internet. I can ping the loopback successfully. I can ping the gateway almost successfully.
This is what i mean:

ping -t 192.168.0.1 results in
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=127
Reply from 192.168.0.1: bytes=32 time<1ms TTL=127
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=127
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=127
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=127
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=127
Reply from 192.168.0.1: bytes=32 time<1ms TTL=127
Request timed out.


You get the picture. It keeps going, with some replies and some time outs. I changed out the patch cable back to the router and even switched ports on the router. All changes gave the same result.

Any thoughts??

[johnwill]

Hold the Windows key and press R, then type CMD to open a command prompt:

In the command prompt window that opens, type type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.