Motorola surf board modem and belkin f5d7230 configuration issue with cable connectio

ashley_chapel · 04-14-2008, 02:51 AM

hi
i have a belkin f5d7230 wireless router and a motorola surf board modem for a telstra bigpond cable connection,and i'm facing a lot of problem is configuring the router

johnwill · 04-14-2008, 11:52 AM

Reset the router to factory defaults by holding the reset button down for 15 seconds with power on.

Turn off everything, the modem, router, computer.
Connect the modem to the router's WAN/Internet port.
Connect the computer to one of the router's LAN/Network ports.
Turn on the modem, wait for a steady connect light.
Turn on the router, wait for two minutes.
Boot the computer.

When the computer is completely booted, let's see this.

Start, Run, CMD to open a command prompt:

Type the following commands, one at a time:

Ping yahoo.com

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.

04-14-2008, 02:51 AM	#1 (permalink)
ashley_chapel Registered User Join Date: Apr 2008 Location: BANGALORE,INDIA Posts: 1 OS: windows xp,vista,MAC OS	Motorola surf board modem and belkin f5d7230 configuration issue with cable connectio hi i have a belkin f5d7230 wireless router and a motorola surf board modem for a telstra bigpond cable connection,and i'm facing a lot of problem is configuring the router

04-14-2008, 11:52 AM	#2 (permalink)
johnwill Manager, Networking Forums Join Date: Sep 2002 Location: S.E. Pennsylvania, US Posts: 40,965 OS: Windows 7, XP-Pro, Vista, Linux Blog Entries: 1	Re: Motorola surf board modem and belkin f5d7230 configuration issue with cable conne Reset the router to factory defaults by holding the reset button down for 15 seconds with power on. Turn off everything, the modem, router, computer. Connect the modem to the router's WAN/Internet port. Connect the computer to one of the router's LAN/Network ports. Turn on the modem, wait for a steady connect light. Turn on the router, wait for two minutes. Boot the computer. When the computer is completely booted, let's see this. Start, Run, CMD to open a command prompt: Type the following commands, one at a time: Ping yahoo.com IPCONFIG /ALL Right click in the command window and choose Select All, then hit Enter. Paste the results in a message here. If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here. __________________ If TSF has helped you, Tell us about it! or Donate to help keep the site up! Microsoft MVP - Windows Desktop Experience