HELP: 3Com SuperStack2

allenpan · 10-29-2004, 02:39 PM

Model: 3COM SuperStack2 NetBuilder 467 3C8467

i just bought a router from ebay, i am unable to find any document or manual nor software, i search on 3com web and found nothing

i am new to this, i connect the cable from my computer to lan, if i use streght it says cable unplug, if i use cross over is ok, but no ip, also on WAN port it says "Line Error" when nothing is plug in, is it right?

i wanna use cable model and use this router to share it, can anyone help!!! plz

thx

Chevy · 10-29-2004, 04:50 PM

I found some info here.

allenpan · 10-30-2004, 04:34 AM

i found that too, but does anyone know where is get access the router config webpage? or is there a software for it? or even manual? i am been looking all over the place can someone help?

Volt-Schwibe · 10-30-2004, 05:33 AM

well, that depends on the router's address on the network...

mine is 192.168.254.254 so i type that into the browser.

it opens a panel, and normally the password is "admin" if it hasnt been changed to something else.

allenpan · 10-30-2004, 06:48 AM

humm, for some reason i can't get ip from it, does the router support tcpip? or does it require something else?

when i plug in a streght cable into Lan 1, lights r off
when i plug cross over on lan 1, the lights r on

when there is nothing on wan, it says calbe error, even i plug in a cross over or streght, the light on calbe error still on

on router system. when it turn on, it goes > Test > Load > Run and the status lights r all on green.....

allenpan · 10-30-2004, 06:52 AM

btw, for those who don't like scrolling up and down, my router is SuperStack2 NetBuilder 3C8467 and is made in 1997...so i don't knoe if it use software or webpage to access the config, still i have problem with getting ip from it

Tooslow · 11-01-2004, 04:20 PM

Have a look on the back of the router, there should be a white push button switch labeled mdix or something simular, if you push that using a stadard patch lead does that allow for the lan light to turn on without using a x-over lead.

Can you supply more info re model of the router IE Superstack 3 4250 etc. also the 3com model # appears to be short a couple of digits.

Hope this helps, if you can get more info on model etc I should be able to locate manuals and drivers.

Tooslow · 11-01-2004, 04:39 PM

Have a look here
Reason for this is that from what I can see the software/manuals are simular to 3coms 3c8461, this link has superstack II SI family info/software.

Good luck let me know how you get on.

[]

10-29-2004, 02:39 PM	#1 (permalink)
allenpan Registered User Join Date: Oct 2004 Posts: 4 OS: XP PRO	HELP: 3Com SuperStack2 Model: 3COM SuperStack2 NetBuilder 467 3C8467 i just bought a router from ebay, i am unable to find any document or manual nor software, i search on 3com web and found nothing i am new to this, i connect the cable from my computer to lan, if i use streght it says cable unplug, if i use cross over is ok, but no ip, also on WAN port it says "Line Error" when nothing is plug in, is it right? i wanna use cable model and use this router to share it, can anyone help!!! plz thx

10-29-2004, 04:50 PM	#2 (permalink)
Chevy Semi-Retired Manager, Microsoft Support Join Date: Jul 2003 Location: Notlob Posts: 5,172 OS: Vista Ultimate My System	I found some info here. __________________ “My philosophy, like color television, is all there in black and white” -M. Python

10-30-2004, 05:33 AM	#4 (permalink)
Volt-Schwibe Asst. Manager, Automotive Forums; HJT Trainee Join Date: Jan 2003 Location: Behind you, watching you as you type. Posts: 7,217 OS: Click "My System" to view details My System	well, that depends on the router's address on the network... mine is 192.168.254.254 so i type that into the browser. it opens a panel, and normally the password is "admin" if it hasnt been changed to something else. __________________ <signature> TSF is funded by our Admin's pocket, care to help? New Members: Subscribe to your thread (Thread Tools) to receive an instant email notification when you get a reply. Power Tip: Creating a single new thread in the correct section is the best way to assure your thread will receive a reply. </signature>

10-30-2004, 04:34 AM	#3 (permalink)
allenpan Registered User Join Date: Oct 2004 Posts: 4 OS: XP PRO	i found that too, but does anyone know where is get access the router config webpage? or is there a software for it? or even manual? i am been looking all over the place can someone help?

10-30-2004, 06:48 AM	#5 (permalink)
allenpan Registered User Join Date: Oct 2004 Posts: 4 OS: XP PRO	humm, for some reason i can't get ip from it, does the router support tcpip? or does it require something else? when i plug in a streght cable into Lan 1, lights r off when i plug cross over on lan 1, the lights r on when there is nothing on wan, it says calbe error, even i plug in a cross over or streght, the light on calbe error still on on router system. when it turn on, it goes > Test > Load > Run and the status lights r all on green.....

10-30-2004, 06:52 AM	#6 (permalink)
allenpan Registered User Join Date: Oct 2004 Posts: 4 OS: XP PRO	btw, for those who don't like scrolling up and down, my router is SuperStack2 NetBuilder 3C8467 and is made in 1997...so i don't knoe if it use software or webpage to access the config, still i have problem with getting ip from it

11-01-2004, 04:20 PM	#7 (permalink)
Tooslow Member Join Date: Sep 2004 Posts: 28 OS: XP-PRO SP1	Have a look on the back of the router, there should be a white push button switch labeled mdix or something simular, if you push that using a stadard patch lead does that allow for the lan light to turn on without using a x-over lead. Can you supply more info re model of the router IE Superstack 3 4250 etc. also the 3com model # appears to be short a couple of digits. Hope this helps, if you can get more info on model etc I should be able to locate manuals and drivers.

11-01-2004, 04:39 PM	#8 (permalink)
Tooslow Member Join Date: Sep 2004 Posts: 28 OS: XP-PRO SP1	Have a look here Reason for this is that from what I can see the software/manuals are simular to 3coms 3c8461, this link has superstack II SI family info/software. Good luck let me know how you get on. []