Network problem

[suavecito195782]

Hey guys i hope someone can help out with issue im having with my pc ok i recently built a new pc i loaded windows vista ultimate on it ok i have two other xp pc's one is connected through cat5 cable the other is wireless both work fine but the new vista pc connects but it just keeps dropping from the network it is wired not wireless i will see the network then i check on it it just dispears internet doesnt work i have a wgr614 netgear router im thinking i just need to do a firmware update i tried everthing i had a guy over here that does network setups he fixed my settings because i set up a staic ip did it wrong he fixed it i thought that had solve my problems but this morning still giving me the same problems

[johnwill]

Please supply the following info, exact make and models of the equipment please.

Make and model of the broadband modem.
Make and model of the router.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Make/model of your computer.
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP2, Vista, etc.

Also, please give an exact description of your problem symptoms, including the exact text of any error messages.



On any problem computer, I'd like to see this:

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.

[suavecito195782]

modem is a motorolla sb5100, router is wgr614v6, the problem computer has windows vista utilmate its on a wired system encryption being used is wep symptoms is the network will just drop when i click on network in vista i see my router its label resdiential gateway so i know i have internet it works fine then i will be surfing pages in it will give me a error saying cant fine webpage it will list problems why it occured is ur not connected to the internet maybe a firewall is blocking or maybe u typed the url wrong then i will go back to network it wont show the resdiental gateway like it just drop from the network then some times go by it comes back Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\David>IPCONFIG /ALL

Windows IP Configuration

Host Name . . . . . . . . . . . . : David-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-04-4B-03-41-89
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::4dba:c074:7385:56b3%8(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, October 24, 2007 1:16:38 PM
Lease Expires . . . . . . . . . . : Saturday, November 30, 2143 8:02:33 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 201327691
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 6:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{5EB0F3D0-1738-45CA-A6DC-ABBD0B4C9
4EA}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.2%10(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 7:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4136:e38a:2469:154a:3f57:fefd(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::2469:154a:3f57:fefd%9(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\David>
C:\Users\David>

[johnwill]

Changes that may help to increase the compatibility of Vista with older networking devices:



Disable the IP Helper service:

1. Go to Start and type in "services.msc" (without the quotes) and press Enter
2. Scroll down to the IP Helper service, right click on it and select Properties
3. In the dropdown box that says "Automatic" or "Manual", set it to Disabled and then click on "Apply"
4. Then click on "Stop" to stop the service from running in the current session
5. Click OK to exit the dialog



Disable IPv6:

1. Go to Start and type in "ncpa.cpl" (without the quotes) and press Enter
2. Right click on each network connection and select "Properties"
3. Remove the checkmark from the box next to "Internet Protocol Version 6 (TCP/IPv6)
4. Click OK to exit the dialog

NOTE: You should do this for each network connection.



Disable the DHCP Broadcast Flag:

Link: http://support.microsoft.com/default.aspx/kb/928233

1. Go to Start and type in "regedit" (without the quotes) and press Enter.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{GUID}
In this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
3. On the Edit menu, point to New, and then click DWORD (32-bit) Value.
4. In the New Value #1 box, type DhcpConnDisableBcastFlagToggle, and then press ENTER.
5. Right-click DhcpConnDisableBcastFlagToggle, and then click Modify.
6. In the Value data box, type 1, and then click OK.
7. Close Registry Editor.

NOTE: You should do this for each and every GUID subkey.



The only program I'm aware of that currently relies on IPv6 is the new Windows Meeting Space. The first 2 changes will cause that program not to work - but will leave all of your normal (IPv4) connections unaffected. If it causes problems that you can't overcome, simply revert back to the original settings.