Us Robotic Modem " Not Set For Dialup"

**Direct Current** · 12-17-2005, 06:20 PM

Hay folks, Had to install a new MOdem in a friends computer, Old board was without question BAD. After install & removal of old Modem Drivers, install of New drivers from CD.

WINME/ Bare bones mem/10 gig HD. , COMPAQ
modem is 56.6k/V.92? fax/voice/em/net / no jumpers.

Install my ISP to connect, Device Manager reconizes MOdem

ButAfter conneting A FLAG come up " NOT set for Dial up" ISP shuts down before Website displays so to look at EM.

All settings are corret to document to Modem. H-E-L-P!!!!

Direct Current.

**manic** · 12-17-2005, 08:46 PM

Looks like the pc or at least the network side still sees the old modem. Go
into control panel under modems, you can run a diagnostic there. If you
happen to see the old modem in there remove it. You may check network
properties as well to insure old modem is not there. You may try using the
network wizard to help you install the modem. Alot of times that does the
trick for me..

12-17-2005, 06:20 PM	#1 (permalink)
Direct Current TSF Enthusiast Join Date: Apr 2005 Location: Dothan,Al Posts: 1,964 OS: WIN 98, WIN/xp, Vista	Us Robotic Modem " Not Set For Dialup" Hay folks, Had to install a new MOdem in a friends computer, Old board was without question BAD. After install & removal of old Modem Drivers, install of New drivers from CD. WINME/ Bare bones mem/10 gig HD. , COMPAQ modem is 56.6k/V.92? fax/voice/em/net / no jumpers. Install my ISP to connect, Device Manager reconizes MOdem ButAfter conneting A FLAG come up " NOT set for Dial up" ISP shuts down before Website displays so to look at EM. All settings are corret to document to Modem. H-E-L-P!!!! Direct Current.

12-17-2005, 08:46 PM	#2 (permalink)
manic Mod Hardware Team Join Date: Aug 2005 Location: Florida Posts: 5,245 OS: xp	Looks like the pc or at least the network side still sees the old modem. Go into control panel under modems, you can run a diagnostic there. If you happen to see the old modem in there remove it. You may check network properties as well to insure old modem is not there. You may try using the network wizard to help you install the modem. Alot of times that does the trick for me..