RCA ( Model: DCM425 ) Modem Problem

[queenie_carter]

im trying to inable my ip router but i dont know how to do it.
im tryin to connect my wii to the internet i put in everthing i needed but the connection still failed.

[johnwill]

With absolutely no information about the equipment, it's hard to say.


Please supply the following info, exact make and models of the equipment please.

Name of your ISP (Internet Service Provider).
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Version and patch level of Windows on all affected machines, i.e. XP (Home or Pro), SP1-SP2-SP3, Vista (Home, Business, Ultimate), etc.





Please give an exact description of your problem symptoms, including the exact text of any error messages.

• If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?
• For wireless issues, have you disabled all encryption on the router to see if you can connect that way?
• Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?
• If there are other computers on the same network, are they experiencing the same issue, or do they function normally?

For a basic installation of a router on a cable modem account, try this.

Reset the router to factory defaults by holding the reset button down for 15 seconds with power on. The following procedure should get you a connection with any broadband modem that is configured to use DHCP for the router connection, such as cable modems, and many DSL modems. If you require PPPoE configuration for the DSL modem, that will have to be configured to match the ISP requirements.

• Turn off everything, the modem, router, computer.
• Connect the modem to the router's WAN/Internet port.
• Connect the computer to one of the router's LAN/Network ports.
• Turn on the modem, wait for a steady connect light.
• Turn on the router, wait for two minutes.
• Boot the computer.

When the computer is completely booted, let's see this.

Hold the Windows key and press R, then type CMD to open a command prompt:

In the command prompt window that opens, type type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.