[SOLVED] Issue with DSLAM - need help

[cvs999]

I need some information/help related to ALCATEL 7300 DSLAM.

I see DSLAM being in many of the posts hence posting my query here.

I am trying to bringup ALCATEL 7300 DSLAM but am never able to get the pormpt to login.

The DSLAM has the following cards.
AACU-C, SANT-F, ADLT-N, ABLT-D, ABLT-F and ADLT-L.

LEDs on ADLT-N card has never glown, so I guess this card is not working.

Major and critical LED's on AACU-C are always glowing. Below are the messages printed when connected to the DSLAM. (Term serv is connected to the AACU-C card.

Some of the failures noticed are:

\"Failed to load or find requested software\""

\"Equipment failed self-test\""

I'm not sure how to proceed further.

Any help/poniters in this regard is highly appreciated.

WHen connected to the DSLAM after powering it on below messages are printed:

Serial driver initialized.
Waiting for MIB stability - please be patient
....
MIB is stable, continuing

[;

2 70-01-01 00:04:28
M 0 DENY
ICNC
/* Input, Command, Not Consistent */
/* The command code entered is not a valid command code. */
/* Error in VERB/MOD at position = 0. */
;

r[?6l[?7l[20l[4h[?3l

/* The command code entered is not a valid command code. */
Enter Verb
(ACT, ALW, CANC, CHG, CONN, DISC, DLT, ED, ENT,
FREE, INH, INIT, LOGOFF, OPR, RD, REPT, RESV,
RLS, RST, RTRV, SET, STA, STP, SW, TST) : [;

2 70-01-01 00:04:31
** 1 REPT ALM EQPT
"LT-1-1-4:MJ,EQPT,SA,1-1,0-4-31:\"Equipment failed self-test\""
;

Would you like to establish a prompt login session? (Y, [N]):

2 70-01-01 00:04:28

2 70-01-01 00:04:31
** 3 REPT ALM EQPT
"LT-1-1-1:MJ,PROGVER,NSA,1-1,0-4-31:
\"Failed to load or find requested software\""
;

/* Routing of partial commands is not allowed */

2 70-01-01 00:04:31
M 0 DENY
ICNC
/* Input, Command, Not Consistent */
/* The command code entered is not a valid command code. */
/* Error in VERB/MOD at position = 0. */
;

Would you like to establish a prompt login session? (Y, [N]): t
Please enter either Y or N only.s)e e ICNC

Would you like to establish a prompt login session? (Y, [N]): i s)* Isput, Comma
nd, Not Consistent */ /* The command code entered is not a valid command code.
*/ /* Error in VERB/MOD at position = 0. */; r[?6l[?7l[20l[4h[?3l/* The comm

and the above 10 lines are repeatedly printed.......

[Merlin_3000uk]

Howdy, did you ever get sorted with your DSLAM ?

[WiFiTech]

I am not an Alcatel user, but when you have a software load failure things are not good. Looks like it has lost connection to the OS. Are you familiar with the programming of this device. I would look for the back up configuration file, and I might even suggest opening the case to see if there is hardware malfunction. Of course, don't do this if you are not trained in it. Sorry I am not more help.

[rosiesdad]

The DSLAM should be only accessed by trained TELCO or ISP personnel.
Contact Alcatel or your company for support

[cvs999]

Issue was that the flash was corrupted. Programming the flash also did not help. Eventually had to get a new flash with valid image to bring up the DSLAM. Thanks for posting your reply.

[Merlin_3000uk]

Hi cvs999,

If you get stuck with anything, give us a shout.

I am pretty familiar with this DSLAM.

Cheers
Simon