Rangemax Next Wireless-n Adsl2+ Modem Router

yankee786uk · 07-03-2007, 01:37 PM

HELP ! I am trieing to set up RANGEMAX NEXT WIRELESS -N,ADSL MODEM ROUTER

I manage to set it first all working fine till I switched the computer off and went to bed

thinking yes i did it ;

The next morning I trie to get on Internet,You now what it will not connect to the Internet,THEN I could not get to this site because I disconnected my old MODEM Thomson/speedtouch,which then wouldn't set connection up

FINELY: I did get Thomson speedtouch connected and here I am !This Rangemax is doing my head in? ANY HELP WILL BE GREATFULL

la1 · 07-03-2007, 03:22 PM

Dude did you plug in your user name and password from your isp into the router. ?

or does your service use a mac address possibly the mac address of your pc
Hmmm possibly the mac address of your old modem, no then you would not connect at all.

yankee786uk · 07-03-2007, 03:27 PM

Yes that is what I did >use my old isp/modem ,pass word and user name

la1 · 07-03-2007, 03:42 PM

is there a setting that says keep alive, or anything close to that , that refers to the connection ?

yankee786uk · 07-03-2007, 03:50 PM

All I get is ,power light comes and modem routers port light comes on,

Other lights like wireless and Internet lights are not lighting up ?not sure because I cannot Acctivate this modem

la1 · 07-03-2007, 04:12 PM

lol no inside the router, a setting

yankee786uk · 07-04-2007, 11:35 AM

dontkno Help I can't get Internet, If I Disconnect Present Active Thomson SpeedTouch Modem,Which I use to connect to Internet,

I am Trieing to instal New NETGEAR RANGEMAX NEXT WIRELESS -N ADSL+2 MODEM ROUTER,

I have one telephone line,If I disconnect modem cable from my present internet connnection to use with rangemax ,Then the I lose connecton altogather and can not connect the rangemax to internet which then stop me getting the ip address from internet explorer;http:// 192.168.0.1

power light on,, internet light on,, wireless light on,, port light on,,

ANY HELP WIL DO, OR JOSEP WOULD SAY ANY DREAM WILL DO

**johnwill** · 07-05-2007, 07:17 AM

What's the make/model of the existing modem? Do you have a name/password associated with your DSL account? Did you configure the new router with the correct protocol and name/password in the WAN configuration section?

yankee786uk · 07-08-2007, 11:31 AM

The exsisting modem is talktalks, speedtouch user name/password correct

I have tried using the set smartwizard, it keep coming up with NO CABLE OR ROUTER DETECTED,

yet all connection are correct{ except wireless light does not come, which i think need to switched on,but how ?

07-03-2007, 01:37 PM	#1 (permalink)
yankee786uk Registered User Join Date: Jun 2007 Posts: 12 OS: xp	Rangemax Next Wireless-n Adsl2+ Modem Router HELP ! I am trieing to set up RANGEMAX NEXT WIRELESS -N,ADSL MODEM ROUTER I manage to set it first all working fine till I switched the computer off and went to bed thinking yes i did it ; The next morning I trie to get on Internet,You now what it will not connect to the Internet,THEN I could not get to this site because I disconnected my old MODEM Thomson/speedtouch,which then wouldn't set connection up FINELY: I did get Thomson speedtouch connected and here I am !This Rangemax is doing my head in? ANY HELP WILL BE GREATFULL Last edited by yankee786uk; 07-03-2007 at 01:40 PM. Reason: correction

07-03-2007, 03:22 PM	#2 (permalink)
la1 Registered User Join Date: Jul 2007 Posts: 151 OS: XP	Re: Rangemax Next Wireless-n Adsl2+ Modem Router Dude did you plug in your user name and password from your isp into the router. ? or does your service use a mac address possibly the mac address of your pc Hmmm possibly the mac address of your old modem, no then you would not connect at all. Last edited by la1; 07-03-2007 at 03:24 PM.

07-03-2007, 03:27 PM	#3 (permalink)
yankee786uk Registered User Join Date: Jun 2007 Posts: 12 OS: xp	Re: Rangemax Next Wireless-n Adsl2+ Modem Router Yes that is what I did >use my old isp/modem ,pass word and user name

07-03-2007, 03:42 PM	#4 (permalink)
la1 Registered User Join Date: Jul 2007 Posts: 151 OS: XP	Re: Rangemax Next Wireless-n Adsl2+ Modem Router is there a setting that says keep alive, or anything close to that , that refers to the connection ?

07-03-2007, 03:50 PM	#5 (permalink)
yankee786uk Registered User Join Date: Jun 2007 Posts: 12 OS: xp	Re: Rangemax Next Wireless-n Adsl2+ Modem Router All I get is ,power light comes and modem routers port light comes on, Other lights like wireless and Internet lights are not lighting up ?not sure because I cannot Acctivate this modem Last edited by yankee786uk; 07-03-2007 at 03:52 PM.

07-03-2007, 04:12 PM	#6 (permalink)
la1 Registered User Join Date: Jul 2007 Posts: 151 OS: XP	Re: Rangemax Next Wireless-n Adsl2+ Modem Router lol no inside the router, a setting

07-04-2007, 11:35 AM	#7 (permalink)
yankee786uk Registered User Join Date: Jun 2007 Posts: 12 OS: xp	Re: Rangemax Next Wireless-n Adsl2+ Modem Router dontkno Help I can't get Internet, If I Disconnect Present Active Thomson SpeedTouch Modem,Which I use to connect to Internet, I am Trieing to instal New NETGEAR RANGEMAX NEXT WIRELESS -N ADSL+2 MODEM ROUTER, I have one telephone line,If I disconnect modem cable from my present internet connnection to use with rangemax ,Then the I lose connecton altogather and can not connect the rangemax to internet which then stop me getting the ip address from internet explorer;http:// 192.168.0.1 power light on,, internet light on,, wireless light on,, port light on,, ANY HELP WIL DO, OR JOSEP WOULD SAY ANY DREAM WILL DO

07-05-2007, 07:17 AM	#8 (permalink)
johnwill Manager, Networking Forums Join Date: Sep 2002 Location: S.E. Pennsylvania, US Posts: 41,654 OS: Windows 7, XP-Pro, Vista, Linux Blog Entries: 1	Re: Rangemax Next Wireless-n Adsl2+ Modem Router What's the make/model of the existing modem? Do you have a name/password associated with your DSL account? Did you configure the new router with the correct protocol and name/password in the WAN configuration section? __________________ If TSF has helped you, Tell us about it! or Donate to help keep the site up! Microsoft MVP - Windows Desktop Experience

07-08-2007, 11:31 AM	#9 (permalink)
yankee786uk Registered User Join Date: Jun 2007 Posts: 12 OS: xp	Re: Rangemax Next Wireless-n Adsl2+ Modem Router The exsisting modem is talktalks, speedtouch user name/password correct I have tried using the set smartwizard, it keep coming up with NO CABLE OR ROUTER DETECTED, yet all connection are correct{ except wireless light does not come, which i think need to switched on,but how ? Last edited by yankee786uk; 07-08-2007 at 11:34 AM.