d-link 302g configure page

malc7067 · 06-16-2006, 05:45 PM

Im with Optusnet DSL.

1st problem is when I go to the web-based configure page (10.1.1.1 by default), it shows a page that you can turn NAT on off and other settings, but I do not have very many things, like I want to Port Foward Bittorrent and stuff, but I cant do that with this stupid configuration page. How I get the proper one?

2nd Problem is when I connect it to my switch, I cant get onto that page... It says 501 Method Not Implemented.

Thanks heaps.

dai · 06-16-2006, 06:12 PM

the manual is on the setup disk,these are set up to optus configuration
i bought one s/hand and binned it after 2 days

malc7067 · 06-16-2006, 06:18 PM

so I cant get onto the real configuration page to do portfowarding and stufF?
also, how do i get onto the configuration page when its on the network switch?
thanks.

dai · 06-16-2006, 06:40 PM

you should be able to,i know i printed a manual off but i cannot put my hands on it
the dlinks quite often refuse to go into setup,i usually reboot the computer to clear the problem,i don't have a switch,does it go in straight away connected without the switch

malc7067 · 06-17-2006, 04:28 AM

well, when im directly connected to the modem (no switch) I type 10.1.1.1 and it goes to the optus configuration page which has barely anything to do on it... When i go through the switch to the modem by typing 10.1.1.1, it says "501 method not implemented". Ive tried other addresses with no luck. How can I, even if i directly connect to the modem, (no switch), get to a proper configuration page to port foward n stuff.

hope u understand
thanks.

malc7067 · 06-17-2006, 05:27 AM

to clear things up,the optus configuration page is the page that is used for configuration, but i want to know how i can port foward etc, because the page that optus has to configure the modem is useless

dai · 06-17-2006, 12:00 PM

http://www.pacific.net.au/technical_...are/dlink302g/
you will find all here for a 302g

malc7067 · 06-17-2006, 04:09 PM

yes, on that page it has all the info, but it keeps talking about a configuration page, which i do not have, i have attached 2 pictures of my configuration page, 1st being the main page, and the 2nd being wat you see when i click "advanced network setup". This configuration page is not the same as the one mentioned everywhere i see. Under each of the headings, on the left of the first pic, there is nothing in them, just info, no actual configuring stuff.

Thanks.

dai · 06-17-2006, 04:15 PM

this is a free modem or subsadised modem supplied by optus,it has their firmware and cannot be updated with dlink updates?

dai · 06-17-2006, 04:22 PM

http://forums.whirlpool.net.au/forum...9109&r=8238360

dai · 06-17-2006, 04:23 PM

10.1.1.1/hag/pages1/home.ssi

malc7067 · 06-17-2006, 04:59 PM

thanks so much, that last one got it :)

06-16-2006, 05:45 PM	#1 (permalink)
malc7067 Registered User Join Date: Mar 2006 Posts: 24 OS: Win XP Home	d-link 302g configure page Im with Optusnet DSL. 1st problem is when I go to the web-based configure page (10.1.1.1 by default), it shows a page that you can turn NAT on off and other settings, but I do not have very many things, like I want to Port Foward Bittorrent and stuff, but I cant do that with this stupid configuration page. How I get the proper one? 2nd Problem is when I connect it to my switch, I cant get onto that page... It says 501 Method Not Implemented. Thanks heaps. Last edited by malc7067 : 06-16-2006 at 06:06 PM.

06-16-2006, 06:12 PM	#2 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 44,236 OS: vista 32x ultimate retail	the manual is on the setup disk,these are set up to optus configuration i bought one s/hand and binned it after 2 days __________________

06-16-2006, 06:40 PM	#4 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 44,236 OS: vista 32x ultimate retail	you should be able to,i know i printed a manual off but i cannot put my hands on it the dlinks quite often refuse to go into setup,i usually reboot the computer to clear the problem,i don't have a switch,does it go in straight away connected without the switch __________________

06-17-2006, 04:28 AM	#5 (permalink)
malc7067 Registered User Join Date: Mar 2006 Posts: 24 OS: Win XP Home	hmm well, when im directly connected to the modem (no switch) I type 10.1.1.1 and it goes to the optus configuration page which has barely anything to do on it... When i go through the switch to the modem by typing 10.1.1.1, it says "501 method not implemented". Ive tried other addresses with no luck. How can I, even if i directly connect to the modem, (no switch), get to a proper configuration page to port foward n stuff. hope u understand thanks.

06-17-2006, 12:00 PM	#7 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 44,236 OS: vista 32x ultimate retail	http://www.pacific.net.au/technical_...are/dlink302g/ you will find all here for a 302g __________________

06-16-2006, 06:18 PM	#3 (permalink)
malc7067 Registered User Join Date: Mar 2006 Posts: 24 OS: Win XP Home	so I cant get onto the real configuration page to do portfowarding and stufF? also, how do i get onto the configuration page when its on the network switch? thanks.

06-17-2006, 05:27 AM	#6 (permalink)
malc7067 Registered User Join Date: Mar 2006 Posts: 24 OS: Win XP Home	to clear things up,the optus configuration page is the page that is used for configuration, but i want to know how i can port foward etc, because the page that optus has to configure the modem is useless

06-17-2006, 04:15 PM	#9 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 44,236 OS: vista 32x ultimate retail	this is a free modem or subsadised modem supplied by optus,it has their firmware and cannot be updated with dlink updates? __________________

06-17-2006, 04:22 PM	#10 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 44,236 OS: vista 32x ultimate retail	http://forums.whirlpool.net.au/forum...9109&r=8238360 __________________

06-17-2006, 04:23 PM	#11 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 44,236 OS: vista 32x ultimate retail	10.1.1.1/hag/pages1/home.ssi __________________

06-17-2006, 04:59 PM	#12 (permalink)
malc7067 Registered User Join Date: Mar 2006 Posts: 24 OS: Win XP Home	thanks so much, that last one got it :)