XP shutting down on disk cleanup

xstitchcrazee · 10-03-2009, 03:58 AM

Hi My laptop shuts down during compress old files on disk cleanup. I have followed the advise given in this thread and found a yellow warning sign on serial in the device manager. I couldn't get the BSOD to show up.

The errors in applications are as follows

41 Application Hang ID# 1002
Hanging application iexplore.exe, version 8.0.6001.18702, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

1 Application Error ID# 1005 (This one I know my sd card from my camera was playing up)

Windows cannot access the file E:\DCIM\100PENTX\IMGP1287.jpg for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program IMGP1287.jpg because of this error.

Program: IMGP1287.jpg
File: E:\DCIM\100PENTX\IMGP1287.jpg

The error value is listed in the Additional Data section.
User Action

2 Application Error ID# 1001

Fault bucket 1231531897.

14 Application Error ID# 1000

Faulting application dot1xcfg.exe, version 10.5.1.11, faulting module advapi32.dll, version 5.1.2600.5755, fault address 0x00016fdf.

The warnings in applications are as follows

284 SQL Browser ID# 3

The configuration of the AdminConnection\TCP protocol in the SQL instance MSSMLBIZ is not valid.

16 Userenv ID# 1517

Windows saved user UNKNOWN-B70D5BF\user registry while an application or service was still using the registry during log off. The memory used by the user's registry has not been freed. The registry will be unloaded when it is no longer in use.

This is often caused by services running as a user account, try configuring the services to run in either the LocalService or NetworkService account.

The errors in System are as follows

1 acpiec ID# 1

\Device\ACPIEC: The embedded controller (EC) hardware didn't respond within the timeout period. This may indicate an error in the EC hardware or firmware, or possibly a poorly designed BIOS which accesses the EC in an unsafe manner. The EC driver will retry the failed transaction if possible.

1 W32Time ID# 17

Time Provider NtpClient: An error occurred during DNS lookup of the manually configured peer 'time.windows.com,0x1'. NtpClient will try the DNS lookup again in 15 minutes. The error was: A socket operation was attempted to an unreachable host. (0x80072751)

1 W32Time ID# 29

The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 14 minutes. NtpClient has no source of accurate time.

1 NetBT ID# 4321

The name "MSHOME :1d" could not be registered on the Interface with IP address 192.168.1.66. The machine with the IP address 192.168.1.64 did not allow the name to be claimed by this machine.

2 Service Control Manager ID# 7011

Timeout (30000 milliseconds) waiting for a transaction response from the avg8wd service.

The warnings in System are as follows

13 W32Time ID#36

The time service has not been able to synchronize the system time for 49152 seconds because none of the time providers has been able to provide a usable time stamp. The system clock is unsynchronized.

10 Tcpip ID# 4226

TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

1 Dhcp ID# 1007

Your computer has automatically configured the IP address for the Network Card with network address 0012F06F7501. The IP address being used is 169.254.175.149

2 Dhcp ID# 1003

Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0012F06F7501. The following error occurred:
The semaphore timeout period has expired. . Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

Any help will be appreciated

Dogg · 10-08-2009, 12:12 PM

Side from the compress function not working (which isn't recommended anyway), are you having any other issues?

xstitchcrazee · 10-12-2009, 06:39 AM

Not that I am aware of......
Just out of curiosty can all the error logs be cleared and if so how do I go about doing that?

10-03-2009, 03:58 AM	#1 (permalink)
xstitchcrazee Registered User Join Date: Oct 2009 Posts: 2 OS: XP My System	XP shutting down on disk cleanup Hi My laptop shuts down during compress old files on disk cleanup. I have followed the advise given in this thread and found a yellow warning sign on serial in the device manager. I couldn't get the BSOD to show up. The errors in applications are as follows 41 Application Hang ID# 1002 Hanging application iexplore.exe, version 8.0.6001.18702, hang module hungapp, version 0.0.0.0, hang address 0x00000000. 1 Application Error ID# 1005 (This one I know my sd card from my camera was playing up) Windows cannot access the file E:\DCIM\100PENTX\IMGP1287.jpg for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program IMGP1287.jpg because of this error. Program: IMGP1287.jpg File: E:\DCIM\100PENTX\IMGP1287.jpg The error value is listed in the Additional Data section. User Action 2 Application Error ID# 1001 Fault bucket 1231531897. 14 Application Error ID# 1000 Faulting application dot1xcfg.exe, version 10.5.1.11, faulting module advapi32.dll, version 5.1.2600.5755, fault address 0x00016fdf. The warnings in applications are as follows 284 SQL Browser ID# 3 The configuration of the AdminConnection\TCP protocol in the SQL instance MSSMLBIZ is not valid. 16 Userenv ID# 1517 Windows saved user UNKNOWN-B70D5BF\user registry while an application or service was still using the registry during log off. The memory used by the user's registry has not been freed. The registry will be unloaded when it is no longer in use. This is often caused by services running as a user account, try configuring the services to run in either the LocalService or NetworkService account. The errors in System are as follows 1 acpiec ID# 1 \Device\ACPIEC: The embedded controller (EC) hardware didn't respond within the timeout period. This may indicate an error in the EC hardware or firmware, or possibly a poorly designed BIOS which accesses the EC in an unsafe manner. The EC driver will retry the failed transaction if possible. 1 W32Time ID# 17 Time Provider NtpClient: An error occurred during DNS lookup of the manually configured peer 'time.windows.com,0x1'. NtpClient will try the DNS lookup again in 15 minutes. The error was: A socket operation was attempted to an unreachable host. (0x80072751) 1 W32Time ID# 29 The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 14 minutes. NtpClient has no source of accurate time. 1 NetBT ID# 4321 The name "MSHOME :1d" could not be registered on the Interface with IP address 192.168.1.66. The machine with the IP address 192.168.1.64 did not allow the name to be claimed by this machine. 2 Service Control Manager ID# 7011 Timeout (30000 milliseconds) waiting for a transaction response from the avg8wd service. The warnings in System are as follows 13 W32Time ID#36 The time service has not been able to synchronize the system time for 49152 seconds because none of the time providers has been able to provide a usable time stamp. The system clock is unsynchronized. 10 Tcpip ID# 4226 TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts. 1 Dhcp ID# 1007 Your computer has automatically configured the IP address for the Network Card with network address 0012F06F7501. The IP address being used is 169.254.175.149 2 Dhcp ID# 1003 Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0012F06F7501. The following error occurred: The semaphore timeout period has expired. . Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. Any help will be appreciated

10-08-2009, 12:12 PM	#2 (permalink)
Dogg Tech Hardware Team Join Date: Apr 2009 Location: St Louis, MO Posts: 1,973 OS: XP sp3	Re: XP shutting down on disk cleanup Side from the compress function not working (which isn't recommended anyway), are you having any other issues? __________________ Google is your friend !

10-12-2009, 06:39 AM	#3 (permalink)
xstitchcrazee Registered User Join Date: Oct 2009 Posts: 2 OS: XP My System	Re: XP shutting down on disk cleanup Not that I am aware of...... Just out of curiosty can all the error logs be cleared and if so how do I go about doing that?