been getting bsod errors

hazzal · 06-24-2009, 04:55 AM

ive been getting bsod erros recently after i replaced a graphics card, i tried removing the card and switching to the onboard but it is still not working. I recently formatted my computer but nothing is fixing it. The errors ive been getting are
0xc5
0x19
0x24
0x4e
0x1a
0x8e
0x0a
0xc2
any suggestions on what could be wrong would be appreciated.

dai · 06-24-2009, 05:40 AM

multiple different bsod usually indicate underpowered

what are you running
video card
cpu
m/board
ram
power supply
brand
wattage

check the listings in the bios for voltages and temperatures and post them

hazzal · 06-25-2009, 01:12 AM

well now my computer isnt booting and when i try to enter bios it just restarts.
it goes through the first screen with HP etc, then it just goes blank and stays blank.

hazzal · 06-25-2009, 02:01 AM

ok i just got into my bios but it wont let me check anything, hardware, temperature or voltage, it is phoenix - AwardBIOS CMOS Setup Utility

dai · 06-25-2009, 02:30 AM

can you turn off disable the hp gui screen in the bios

hazzal · 06-25-2009, 03:41 AM

no it wont let me

dai · 06-25-2009, 08:12 AM

see what info these give you

http://www.cpuid.com/pcwizard.php

http://www.hwinfo.com/download32.html

hazzal · 06-25-2009, 11:50 PM

i would if i could but my computer is now booting then about 5 seconds later getting the blue screen, so i dont know what to do. Im going to try changing power boards or connecting it directly to a socket in case it isnt getting enough power. As it worked at a technicians shop but it wont at home.

dai · 06-26-2009, 08:54 AM

run

chkdsk /r

hazzal · 07-04-2009, 07:07 PM

i try to run chkdsk /r and while the its going i get the dreaded bsod, its strange sometimes it last for hours before it breaks but after that it breaks every 5 minutes or even on startup.

EDIT: i ran some memory management thing and it told me i had a hardware problem, but when i go to boot to see what it is i get bsod.

EDIT2: could faulty ram be causing this problem, or is this unlikely?

dai · 07-04-2009, 08:02 PM

d/load and run the h/drive makers diagnostic utility on the h/drive

http://www.tacktech.com/display.cfm?ttid=287

run memtest on the ram

http://www.memtest.org/

post your specs

hazzal · 07-04-2009, 08:03 PM

ok ill see if i can get my comp running for long enough to do that.

dai · 07-04-2009, 08:06 PM

you boot from the disks you make and they run before anything else kicks in

hazzal · 07-04-2009, 08:09 PM

so make disk's with memtest etc?

dai · 07-04-2009, 08:30 PM

you d/load

burn as a iso

then boot from the disk

http://www.imgburn.com/index.php?act=download

hazzal · 07-04-2009, 08:31 PM

k ill do that thanks alot ill post the results of the tests

hazzal · 07-05-2009, 07:55 PM

i have like 1800+ errors, so i cant post them all sorry, this is with memtest86+ btw. does this mean my ram is screwed or any particular hardware problem?

dai · 07-05-2009, 08:07 PM

if you ran it on 1 stick at a time rma the ram

if you did not run it on one stick at a time that would explain all the errors

hazzal · 07-05-2009, 09:25 PM

ok ill run it 1 stick at a time

EDIT: if i try to run it with 1 of the sticks in it wont go past the hp screen, but with the other it works fine.

hazzal · 07-06-2009, 09:01 AM

ok i got it running, over 3k errors on 1 stick and 0 on the other removed the error stick and it hasnt broken since.

06-24-2009, 04:55 AM	#1 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	been getting bsod errors ive been getting bsod erros recently after i replaced a graphics card, i tried removing the card and switching to the onboard but it is still not working. I recently formatted my computer but nothing is fixing it. The errors ive been getting are 0xc5 0x19 0x24 0x4e 0x1a 0x8e 0x0a 0xc2 any suggestions on what could be wrong would be appreciated.

06-24-2009, 05:40 AM	#2 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,759 OS: win 7 32x 64x rtm	Re: been getting bsod errors multiple different bsod usually indicate underpowered what are you running video card cpu m/board ram power supply brand wattage check the listings in the bios for voltages and temperatures and post them __________________

06-25-2009, 01:12 AM	#3 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors well now my computer isnt booting and when i try to enter bios it just restarts. it goes through the first screen with HP etc, then it just goes blank and stays blank.

06-25-2009, 02:01 AM	#4 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors ok i just got into my bios but it wont let me check anything, hardware, temperature or voltage, it is phoenix - AwardBIOS CMOS Setup Utility

06-25-2009, 02:30 AM	#5 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,759 OS: win 7 32x 64x rtm	Re: been getting bsod errors can you turn off disable the hp gui screen in the bios __________________

06-25-2009, 03:41 AM	#6 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors no it wont let me

06-25-2009, 08:12 AM	#7 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,759 OS: win 7 32x 64x rtm	Re: been getting bsod errors see what info these give you http://www.cpuid.com/pcwizard.php http://www.hwinfo.com/download32.html __________________

06-25-2009, 11:50 PM	#8 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors i would if i could but my computer is now booting then about 5 seconds later getting the blue screen, so i dont know what to do. Im going to try changing power boards or connecting it directly to a socket in case it isnt getting enough power. As it worked at a technicians shop but it wont at home.

06-26-2009, 08:54 AM	#9 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,759 OS: win 7 32x 64x rtm	Re: been getting bsod errors run chkdsk /r __________________

07-04-2009, 07:07 PM	#10 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors i try to run chkdsk /r and while the its going i get the dreaded bsod, its strange sometimes it last for hours before it breaks but after that it breaks every 5 minutes or even on startup. EDIT: i ran some memory management thing and it told me i had a hardware problem, but when i go to boot to see what it is i get bsod. EDIT2: could faulty ram be causing this problem, or is this unlikely? Last edited by hazzal; 07-04-2009 at 07:15 PM.

07-04-2009, 08:02 PM	#11 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,759 OS: win 7 32x 64x rtm	Re: been getting bsod errors d/load and run the h/drive makers diagnostic utility on the h/drive http://www.tacktech.com/display.cfm?ttid=287 run memtest on the ram http://www.memtest.org/ post your specs __________________

07-04-2009, 08:03 PM	#12 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors ok ill see if i can get my comp running for long enough to do that.

07-04-2009, 08:06 PM	#13 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,759 OS: win 7 32x 64x rtm	Re: been getting bsod errors you boot from the disks you make and they run before anything else kicks in __________________

07-04-2009, 08:09 PM	#14 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors so make disk's with memtest etc?

07-04-2009, 08:30 PM	#15 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,759 OS: win 7 32x 64x rtm	Re: been getting bsod errors you d/load burn as a iso then boot from the disk http://www.imgburn.com/index.php?act=download __________________

07-04-2009, 08:31 PM	#16 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors k ill do that thanks alot ill post the results of the tests

07-05-2009, 07:55 PM	#17 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors i have like 1800+ errors, so i cant post them all sorry, this is with memtest86+ btw. does this mean my ram is screwed or any particular hardware problem?

07-05-2009, 08:07 PM	#18 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,759 OS: win 7 32x 64x rtm	Re: been getting bsod errors if you ran it on 1 stick at a time rma the ram if you did not run it on one stick at a time that would explain all the errors __________________

07-05-2009, 09:25 PM	#19 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors ok ill run it 1 stick at a time EDIT: if i try to run it with 1 of the sticks in it wont go past the hp screen, but with the other it works fine. Last edited by hazzal; 07-05-2009 at 09:29 PM.

07-06-2009, 09:01 AM	#20 (permalink)
hazzal Registered User Join Date: Jun 2009 Posts: 15 OS: Vista	Re: been getting bsod errors ok i got it running, over 3k errors on 1 stick and 0 on the other removed the error stick and it hasnt broken since.