Invalid System Disk Error

blueumulu · 10-16-2005, 04:38 AM

After doing an upgrade to an anti virus package (CA), on rebooting I have got a 'invalid system disk' error message. As I thought the upgrade to the antivirus has somehow corrupted my OS, I fdisk-ed the partion, re-formatted and re-installed only to get the same message.... Simile, with a spare drive I have got the same issues occur (the re-install always falls down when it re-boots and comes up with 'invalid system disk'.

The drives are PATA. I have 2; both are Western Digital with one being 120GB (WD1200JB) and the other 80GB (WD800), but currently I have only the 120GB connected (no jumpers). Both drives have at least 3 partitions on them.

I'm using a P4 2.4Mz with a single 512MB stick of DDR RAM and the Motherboard is an Intel D865GLC.

Any help would be greatly appreciated! thanx

Ericwaycotx · 10-16-2005, 10:36 PM

This error is the cause of your computer trying to boot to a non-bootable disk. Make sure all CD/Floppy Disks are removed. Make sure the boot order in your Bios is 1. Hard Disk 2. Floppy 3. Cd-rom.

Have fun

blueumulu · 10-17-2005, 02:15 AM

I will take a look at that, thanks...

I found an article on the Western Digital site saying that the boot record of the boot drive is corrupted and that I have re-write the boot record with fdisk...

**cjessee** · 10-17-2005, 06:03 AM

Also, be sure to check the jumper settings on each of the hard disks. I have seen a computer complain about a bad system disk when one of my disks was jumpered Master w/Slave, and no slave was present. Check that out.

10-16-2005, 04:38 AM	#1 (permalink)
blueumulu Registered User Join Date: Oct 2005 Posts: 4 OS: W2K	Invalid System Disk Error After doing an upgrade to an anti virus package (CA), on rebooting I have got a 'invalid system disk' error message. As I thought the upgrade to the antivirus has somehow corrupted my OS, I fdisk-ed the partion, re-formatted and re-installed only to get the same message.... Simile, with a spare drive I have got the same issues occur (the re-install always falls down when it re-boots and comes up with 'invalid system disk'. The drives are PATA. I have 2; both are Western Digital with one being 120GB (WD1200JB) and the other 80GB (WD800), but currently I have only the 120GB connected (no jumpers). Both drives have at least 3 partitions on them. I'm using a P4 2.4Mz with a single 512MB stick of DDR RAM and the Motherboard is an Intel D865GLC. Any help would be greatly appreciated! thanx

10-17-2005, 06:03 AM	#4 (permalink)
cjessee Uh oh. Join Date: Aug 2005 Location: Ohio Posts: 782 OS: Windows NT/2000/XP, Dictaphone, Windows 2003 Server	jumper? Also, be sure to check the jumper settings on each of the hard disks. I have seen a computer complain about a bad system disk when one of my disks was jumpered Master w/Slave, and no slave was present. Check that out.

10-16-2005, 10:36 PM	#2 (permalink)
Ericwaycotx Registered User Join Date: Oct 2005 Location: Texas Posts: 334 OS: Xp Pro Sp2, Windows 2000 Server My System	This error is the cause of your computer trying to boot to a non-bootable disk. Make sure all CD/Floppy Disks are removed. Make sure the boot order in your Bios is 1. Hard Disk 2. Floppy 3. Cd-rom. Have fun

10-17-2005, 02:15 AM	#3 (permalink)
blueumulu Registered User Join Date: Oct 2005 Posts: 4 OS: W2K	I will take a look at that, thanks... I found an article on the Western Digital site saying that the boot record of the boot drive is corrupted and that I have re-write the boot record with fdisk...