Philips Read Projection TV won't power up

kesrith · 08-15-2009, 01:35 PM

I have a Philips 60PP9202/17F rear projection TV that has stopped powering up. When you press the power button you can hear a sound like a capacitor charging then discharging, over and over, until the power button is pressed again and the TV powers down.

Without a display I'm limited on what diagnostics I can run, but I was able to perform a BLINK test which responded with 1 long and 10 short blinks, unfortunately that code is not listed in the manual I have for the DPTV305F chassis.

If it helps, I'm in Phoenix AZ USA

**octaneman** · 08-16-2009, 05:25 PM

Hi kesrith

I did a quick research and found the error code to be :

code 11 - New NVM IC error (NVM_
IDENTIFICATION_ERROR)

kesrith · 08-18-2009, 01:40 PM

I'll follow up on the code 11, but the manual said the long blinks represent the first digit and the short the last so I was reading it as 110, not as 11.

I'll post what I discover. Thanks.

-Kesrith-

08-15-2009, 01:35 PM	#1 (permalink)
kesrith Registered User Join Date: Aug 2009 Location: Phoenix, AZ, USA Posts: 2 OS: xp sp3	Philips Read Projection TV won't power up I have a Philips 60PP9202/17F rear projection TV that has stopped powering up. When you press the power button you can hear a sound like a capacitor charging then discharging, over and over, until the power button is pressed again and the TV powers down. Without a display I'm limited on what diagnostics I can run, but I was able to perform a BLINK test which responded with 1 long and 10 short blinks, unfortunately that code is not listed in the manual I have for the DPTV305F chassis. If it helps, I'm in Phoenix AZ USA

08-16-2009, 05:25 PM	#2 (permalink)
octaneman Mentor Home Support, Gearhead Automotive Center Join Date: May 2009 Posts: 545 OS: WINXP	Re: Philips Read Projection TV won't power up Hi kesrith I did a quick research and found the error code to be : code 11 - New NVM IC error (NVM_ IDENTIFICATION_ERROR)

08-18-2009, 01:40 PM	#3 (permalink)
kesrith Registered User Join Date: Aug 2009 Location: Phoenix, AZ, USA Posts: 2 OS: xp sp3	Re: Philips Read Projection TV won't power up I'll follow up on the code 11, but the manual said the long blinks represent the first digit and the short the last so I was reading it as 110, not as 11. I'll post what I discover. Thanks. -Kesrith-