Problem with boot of computer (display)

Daniell_ · 02-06-2007, 01:31 PM

When i boot up my computer and it loads and all that sheat.. this shows up on my screen:
Invaild Mode
FH: 31.1 KHz FV: 50.0 Hz

I tryed changing my frequence but i cant get it lower than 60 or above 75...
IT'S ONLY MY COMPUTER MONITOR SAYING THIS!!
if i plug my comp to the TV it's a normal bootup.
It disappears (the invaild thingy) when i come to welcome screen and dont come up more (only if i play game that goes that frequence, it comes again)

PS: i use a LiteON monitor with Radeon graphic card

~~robert diggs~~ · 02-06-2007, 01:37 PM

Hey,

Your frequency is set out of range from what's specified for your monitor. You'll need to change it otherwise your monitor could suffer damage. See if you can reset your monitor back to default settings through your monitor. If you can't, boot into safe mode on your computer and change your display settings back to default.

Regards,

Brandon

Daniell_ · 02-07-2007, 01:25 AM

Can u give a more guided explanation?
Cus i started it in that mode, and i tryed to change but i couldn't find where to and if i tryed the way with right clicking the desktop, it just shows "use default settings", and thats those i am using..

Daniell_ · 02-07-2007, 02:42 AM

When i boot up my computer and it loads and all that sheat.. this shows up on my screen:
Invaild Mode
FH: 31.1 KHz FV: 50.0 Hz

I tryed changing my frequence but i cant get it lower than 60 or above 75...
IT'S ONLY MY COMPUTER MONITOR SAYING THIS!!
if i plug my comp to the TV it's a normal bootup.
It disappears (the invaild thingy) when i come to welcome screen and dont come up more (only if i play game that goes that frequence, it comes again)

PS: i use a LiteON monitor with Radeon graphic card

~~robert diggs~~ · 02-07-2007, 07:05 AM

Hey,

I really can't give you a walk through on your monitor. I don't have the same monitor as you and I don't know how to navigate through it's interface. You're kind of on your own. You could call the manufacturer and see what they say.

Regards,

Brandon

Daniell_ · 02-07-2007, 09:57 AM

It's a LITEON and they SUCK/STINK they hasn't even got any "help/support" of this kinda problems.... i've searched their site..

Daniell_ · 02-07-2007, 09:58 AM

any ideas yet? ^^

dai · 02-07-2007, 10:09 AM

boot into safe mode and set the refresh rate to 60

Daniell_ · 02-07-2007, 10:52 AM

Quote:

Originally Posted by robert diggs

Hey,

Your frequency is set out of range from what's specified for your monitor. You'll need to change it otherwise your monitor could suffer damage. See if you can reset your monitor back to default settings through your monitor. If you can't, boot into safe mode on your computer and change your display settings back to default.

Regards,

Brandon

Already tested that

And i cant change it cus there is no options to choose

[EDIT]
I found a way to change my frequence to 50...
but then my screen says same invaild sheat...
So i think it's my comps bootup frequenct that should get higher or my monitor lower

Daniell_ · 02-08-2007, 10:22 AM

any ideas?

dai · 02-08-2007, 11:09 AM

is your monitor a lcd or crt
if it is lcd set the refresh rate to 60
if it is a crt set it to the highest recommended
right click on the desktop and choose properties/advanced/monitor
tick the box to only show supported refresh rates and then set it to the highest supported

Daniell_ · 02-08-2007, 12:27 PM

It's lcd and i got it at 60

But when i start i got no screen till welcome screen.. i want it to be screen at startup..

EX. if i want to choose safe mode, i cant see so i have to plug my computer to the TV, alse i don't know what i do.. When all loaded i get screen

dai · 02-08-2007, 12:59 PM

from the welcome screen on does it work normally
check in nview that your tv is not set to be the primary display
tap f8 when booting and see the option menu shows on screen

Daniell_ · 02-08-2007, 01:01 PM

From welcome screen it's normal, when trting to fix i DISABLE tv screen and set monitor as primary.
and the last thing, why should i do that ?

dai · 02-08-2007, 02:49 PM

to see if that is the cause,i had a crt monitor that was low to come up,but you would not expect it on a lcd
try turning on the lcd for a minute manualy before booting the computer and see if it brings up the post screens then

Daniell_ · 02-08-2007, 11:25 PM

Hi again it's my birthday today.. and i got a NEW philips "19 monitor, guess what.. same problem...

HELP ME!!

dai · 02-09-2007, 04:52 AM

happy birthday
try switching the cable to the other plug on the card

Daniell_ · 02-09-2007, 09:51 AM

i havent got the second part of the "transformer"...

dai · 02-09-2007, 10:13 AM

if you mean the dvi to vga adapter they only cost a few dollars at just about any computer outlet

Daniell_ · 02-09-2007, 10:18 AM

Well my dad says that i'm not allowed to buy one.. (only 16years)
can it be my graphics

02-06-2007, 01:31 PM	#1 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	Problem with boot of computer When i boot up my computer and it loads and all that sheat.. this shows up on my screen: Invaild Mode FH: 31.1 KHz FV: 50.0 Hz I tryed changing my frequence but i cant get it lower than 60 or above 75... IT'S ONLY MY COMPUTER MONITOR SAYING THIS!! if i plug my comp to the TV it's a normal bootup. It disappears (the invaild thingy) when i come to welcome screen and dont come up more (only if i play game that goes that frequence, it comes again) PS: i use a LiteON monitor with Radeon graphic card

02-07-2007, 02:42 AM	#4 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	Problem with boot of computer (display) When i boot up my computer and it loads and all that sheat.. this shows up on my screen: Invaild Mode FH: 31.1 KHz FV: 50.0 Hz I tryed changing my frequence but i cant get it lower than 60 or above 75... IT'S ONLY MY COMPUTER MONITOR SAYING THIS!! if i plug my comp to the TV it's a normal bootup. It disappears (the invaild thingy) when i come to welcome screen and dont come up more (only if i play game that goes that frequence, it comes again) PS: i use a LiteON monitor with Radeon graphic card

02-07-2007, 10:09 AM	#8 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,732 OS: win 7 32x 64x rtm	boot into safe mode and set the refresh rate to 60 __________________

02-08-2007, 11:09 AM	#11 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,732 OS: win 7 32x 64x rtm	is your monitor a lcd or crt if it is lcd set the refresh rate to 60 if it is a crt set it to the highest recommended right click on the desktop and choose properties/advanced/monitor tick the box to only show supported refresh rates and then set it to the highest supported __________________

02-08-2007, 12:27 PM	#12 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	It's lcd and i got it at 60 But when i start i got no screen till welcome screen.. i want it to be screen at startup.. EX. if i want to choose safe mode, i cant see so i have to plug my computer to the TV, alse i don't know what i do.. When all loaded i get screen Last edited by Daniell_; 02-08-2007 at 12:29 PM.

02-06-2007, 01:37 PM	#2 (permalink)
~~robert diggs~~ Register user Join Date: Jan 2007 Location: US/Florida Posts: 308 OS: Windows XP SP2/Fedora Core 6/Ubuntu Edgy/Suse Linux 10.0/Knoppix 5.1.1/Puppy Linux 2.13	Hey, Your frequency is set out of range from what's specified for your monitor. You'll need to change it otherwise your monitor could suffer damage. See if you can reset your monitor back to default settings through your monitor. If you can't, boot into safe mode on your computer and change your display settings back to default. Regards, Brandon

02-07-2007, 01:25 AM	#3 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	Can u give a more guided explanation? Cus i started it in that mode, and i tryed to change but i couldn't find where to and if i tryed the way with right clicking the desktop, it just shows "use default settings", and thats those i am using..

02-07-2007, 07:05 AM	#5 (permalink)
~~robert diggs~~ Register user Join Date: Jan 2007 Location: US/Florida Posts: 308 OS: Windows XP SP2/Fedora Core 6/Ubuntu Edgy/Suse Linux 10.0/Knoppix 5.1.1/Puppy Linux 2.13	Hey, I really can't give you a walk through on your monitor. I don't have the same monitor as you and I don't know how to navigate through it's interface. You're kind of on your own. You could call the manufacturer and see what they say. Regards, Brandon

02-07-2007, 09:57 AM	#6 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	It's a LITEON and they SUCK/STINK they hasn't even got any "help/support" of this kinda problems.... i've searched their site..

02-07-2007, 09:58 AM	#7 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	any ideas yet? ^^

02-08-2007, 10:22 AM	#10 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	any ideas?

02-08-2007, 12:59 PM	#13 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,732 OS: win 7 32x 64x rtm	from the welcome screen on does it work normally check in nview that your tv is not set to be the primary display tap f8 when booting and see the option menu shows on screen __________________

02-08-2007, 01:01 PM	#14 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	From welcome screen it's normal, when trting to fix i DISABLE tv screen and set monitor as primary. and the last thing, why should i do that ?

02-08-2007, 02:49 PM	#15 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,732 OS: win 7 32x 64x rtm	to see if that is the cause,i had a crt monitor that was low to come up,but you would not expect it on a lcd try turning on the lcd for a minute manualy before booting the computer and see if it brings up the post screens then __________________

02-08-2007, 11:25 PM	#16 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	Hi again it's my birthday today.. and i got a NEW philips "19 monitor, guess what.. same problem... HELP ME!!

02-09-2007, 04:52 AM	#17 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,732 OS: win 7 32x 64x rtm	happy birthday try switching the cable to the other plug on the card __________________

02-09-2007, 09:51 AM	#18 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	i havent got the second part of the "transformer"...

02-09-2007, 10:13 AM	#19 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,732 OS: win 7 32x 64x rtm	if you mean the dvi to vga adapter they only cost a few dollars at just about any computer outlet __________________

02-09-2007, 10:18 AM	#20 (permalink)
Daniell_ Registered User Join Date: Feb 2007 Location: Sweden Posts: 39 OS: Windows Vista, Windows XP, Windows 98, Windows Server 2000, Linux	Well my dad says that i'm not allowed to buy one.. (only 16years) can it be my graphics