Monitor Signal Loss, Stealth S120

Hegemon1990 · 10-28-2006, 07:38 PM

The Video card is Stealth S120, Featuring Radeon 9550

This is similar to another thread, though with a different graphics card, and different game.

Sometimes during the middle of a game of Warcraft Three, my computer's monitor loses signal and the Tower acts like it's restarting, but the only way I can get the signal back is to fully shut down.

Sensors View wes telling me that my CPU fan was running at 0 RPM, so I looked into my computer's innards. I found that I had a wire blocking the CPU fan. I'll still post my info, because it might not be that.

dai · 10-29-2006, 01:11 PM

your 12v+ line is way out of spec
see if you can borrow another psu to try in it
read through this
http://www.techsupportforum.com/showthread.php?t=107466

Hegemon1990 · 10-29-2006, 06:58 PM

k I'll try n switch that over. I found a different problem too. Sometimes in the middle of my game, it will say "out of range" instead of just shutting down.

dai · 10-29-2006, 08:01 PM

check the refresh rate of the monitor is not set to high for the monitor to handle

Hegemon1990 · 10-29-2006, 08:26 PM

I checked the refresh rate, and it says it's in range. But I put it down from 75 to 60 to see if it'll work,

10-28-2006, 07:38 PM	#1 (permalink)
Hegemon1990 Registered User Join Date: Oct 2006 Location: Greenville, Texas Posts: 18 OS: WinXP, WS03	Monitor Signal Loss, Stealth S120 The Video card is Stealth S120, Featuring Radeon 9550 This is similar to another thread, though with a different graphics card, and different game. Sometimes during the middle of a game of Warcraft Three, my computer's monitor loses signal and the Tower acts like it's restarting, but the only way I can get the signal back is to fully shut down. Sensors View wes telling me that my CPU fan was running at 0 RPM, so I looked into my computer's innards. I found that I had a wire blocking the CPU fan. I'll still post my info, because it might not be that.

10-29-2006, 01:11 PM	#2 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,670 OS: win 7 32x 64x rtm	your 12v+ line is way out of spec see if you can borrow another psu to try in it read through this http://www.techsupportforum.com/showthread.php?t=107466 __________________

10-29-2006, 08:01 PM	#4 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 56,670 OS: win 7 32x 64x rtm	check the refresh rate of the monitor is not set to high for the monitor to handle __________________

10-29-2006, 06:58 PM	#3 (permalink)
Hegemon1990 Registered User Join Date: Oct 2006 Location: Greenville, Texas Posts: 18 OS: WinXP, WS03	k I'll try n switch that over. I found a different problem too. Sometimes in the middle of my game, it will say "out of range" instead of just shutting down.

10-29-2006, 08:26 PM	#5 (permalink)
Hegemon1990 Registered User Join Date: Oct 2006 Location: Greenville, Texas Posts: 18 OS: WinXP, WS03	I checked the refresh rate, and it says it's in range. But I put it down from 75 to 60 to see if it'll work,