No sound after installation

Xenetos · 12-07-2008, 05:40 PM

My PC is custom made.
SB Audigy Audio [D800]
In my sound playback i have SB Audigy Audio [D800] and Modem #0 Line Playback
Intel Pentium 4 CPU 2.40 Ghz
512 MB RAM
ACPI Uniprocessor PC

After i installed SB Audigy soundblaster i get no sound from anywhere even my headphones i checked to see if anything was muted nothing is muted, i checked to see if my drivers were working properly and i had no yellow or red error or caution signs next to the drivers. i went and then tried to install the keltech drivers still no sound at all please help me out

hitech · 12-08-2008, 05:50 AM

You could try this if you have sp2 installed.uninstall sb from add/remove programs and device manager. download uaa [microsoft audio bus driver] drivers from here
http://forum.jayceooi.com/viewtopic.php?f=5&t=21
install uaa
reinstall sb drivers. also disable onboard sound in bios

**vladimirb** · 12-08-2008, 06:14 AM

Hey there...
Follow hitech advice and by the way, after sound card installation check what is the primary device in Audio options [Sound Playback]...
Keep us posted...

Xenetos · 12-08-2008, 07:25 AM

i have SP3
and when i went to download that file it gave me this

"setup has detected that the service pack version of this system is newer than the update you are applying there is no need to install this update"

also after i installed my SB Audigy 5.1 i went into my system BIOS and seen that my audio was disabled so i set it to auto. and when i came back my PC said it detected new hardware (Multimedia audio controller) and so i went and put back my sounblaster disc and then it said it cannot find the file and was unable to install the driver. I went to check them in devise manager and under other devises i have 2 Multimedia audio controllers with ? and a ! yellow color.

**vladimirb** · 12-08-2008, 07:41 AM

Could you please provide us with your system specifications????
Uninstall sound drivers and restart PC...
Install drivers again...
Are you sure you are installing correct drivers [I know it sounds odd, but their site is retarded to me]
By the way, do you have drivers that came with sound card???

hitech · 12-08-2008, 08:04 AM

sp3, in that case, disable onboard sound. download and install this uaa
http://files.filefront.com/KB835221e.../fileinfo.html
then install sb

Xenetos · 12-08-2008, 08:36 AM

I have a custom made PC
PC: ACPI Uniprocesser PC
my system has Plug and Play
Processer: Intel Pentium 4 CPU 2.40 GHz
Sound: Creative Audigy Audio Processer (WDM) Realtek AC97 Audio

all im gettin now is sound feedback
let me no if you still need me to uninstall those sound drivers and install the uaa driver and also tell me how i disable onboard sound. Thanks for your help

Xenetos · 12-08-2008, 09:02 AM

ok now i uninstalled AC97 audio driver went into my system BIOS and disabled AC97 Audio and when i restarted my PC i heard the windows opening music but i still get some feedback when i turn up my speakers

hitech · 12-08-2008, 09:04 AM

you enabled onboard sound in bios, so go back to bios and disable it. I would uninstall any sound drivers that are there in add/remove programs and in device manager. install the last uaa driver I posted and then install your sound blaster.

Xenetos · 12-08-2008, 06:08 PM

awsome thanks alot man i got sound now i can hear youtube vids and can play cds in my pc

jaamac · 12-09-2008, 05:26 AM

Iam mr jaamac;
I have a problem for my pc
I isntalled windows after that I get that my sound card updated with out sound ;
I tried to make him un updated and I could not make that
please help me

**vladimirb** · 12-09-2008, 05:38 AM

Hello jaamac....
Would be nice to make a new thread, explain in details what happened and what you did and post your system specifications...
take care...

hitech · 12-09-2008, 06:28 AM

Your Welcome, Xenetos. Good work

12-07-2008, 05:40 PM	#1 (permalink)
Xenetos Registered User Join Date: Nov 2007 Posts: 7 OS: winxp	No sound after installation My PC is custom made. SB Audigy Audio [D800] In my sound playback i have SB Audigy Audio [D800] and Modem #0 Line Playback Intel Pentium 4 CPU 2.40 Ghz 512 MB RAM ACPI Uniprocessor PC After i installed SB Audigy soundblaster i get no sound from anywhere even my headphones i checked to see if anything was muted nothing is muted, i checked to see if my drivers were working properly and i had no yellow or red error or caution signs next to the drivers. i went and then tried to install the keltech drivers still no sound at all please help me out

12-08-2008, 05:50 AM	#2 (permalink)
hitech Tech Hardware Team Join Date: Oct 2007 Location: Kansas Posts: 613 OS: Windows	Re: No sound after installation You could try this if you have sp2 installed.uninstall sb from add/remove programs and device manager. download uaa [microsoft audio bus driver] drivers from here http://forum.jayceooi.com/viewtopic.php?f=5&t=21 install uaa reinstall sb drivers. also disable onboard sound in bios __________________

12-08-2008, 06:14 AM	#3 (permalink)
vladimirb Mentor Hardware Team Join Date: Mar 2008 Location: Banja Luka, Serb Republic Posts: 3,681 OS: xp pro sp3, Server 2003, Windows 7 Professional x64bit My System	Re: No sound after installation Hey there... Follow hitech advice and by the way, after sound card installation check what is the primary device in Audio options [Sound Playback]... Keep us posted... __________________ MCP - MCSA Cisco SMB Account Manager

12-08-2008, 07:25 AM	#4 (permalink)
Xenetos Registered User Join Date: Nov 2007 Posts: 7 OS: winxp	Re: No sound after installation i have SP3 and when i went to download that file it gave me this "setup has detected that the service pack version of this system is newer than the update you are applying there is no need to install this update" also after i installed my SB Audigy 5.1 i went into my system BIOS and seen that my audio was disabled so i set it to auto. and when i came back my PC said it detected new hardware (Multimedia audio controller) and so i went and put back my sounblaster disc and then it said it cannot find the file and was unable to install the driver. I went to check them in devise manager and under other devises i have 2 Multimedia audio controllers with ? and a ! yellow color.

12-08-2008, 07:41 AM	#5 (permalink)
vladimirb Mentor Hardware Team Join Date: Mar 2008 Location: Banja Luka, Serb Republic Posts: 3,681 OS: xp pro sp3, Server 2003, Windows 7 Professional x64bit My System	Re: No sound after installation Could you please provide us with your system specifications???? Uninstall sound drivers and restart PC... Install drivers again... Are you sure you are installing correct drivers [I know it sounds odd, but their site is retarded to me] By the way, do you have drivers that came with sound card??? __________________ MCP - MCSA Cisco SMB Account Manager

12-08-2008, 08:04 AM	#6 (permalink)
hitech Tech Hardware Team Join Date: Oct 2007 Location: Kansas Posts: 613 OS: Windows	Re: No sound after installation sp3, in that case, disable onboard sound. download and install this uaa http://files.filefront.com/KB835221e.../fileinfo.html then install sb __________________

12-08-2008, 08:36 AM	#7 (permalink)
Xenetos Registered User Join Date: Nov 2007 Posts: 7 OS: winxp	Re: No sound after installation I have a custom made PC PC: ACPI Uniprocesser PC my system has Plug and Play Processer: Intel Pentium 4 CPU 2.40 GHz Sound: Creative Audigy Audio Processer (WDM) Realtek AC97 Audio all im gettin now is sound feedback let me no if you still need me to uninstall those sound drivers and install the uaa driver and also tell me how i disable onboard sound. Thanks for your help

12-08-2008, 09:02 AM	#8 (permalink)
Xenetos Registered User Join Date: Nov 2007 Posts: 7 OS: winxp	Re: No sound after installation ok now i uninstalled AC97 audio driver went into my system BIOS and disabled AC97 Audio and when i restarted my PC i heard the windows opening music but i still get some feedback when i turn up my speakers

12-08-2008, 09:04 AM	#9 (permalink)
hitech Tech Hardware Team Join Date: Oct 2007 Location: Kansas Posts: 613 OS: Windows	Re: No sound after installation you enabled onboard sound in bios, so go back to bios and disable it. I would uninstall any sound drivers that are there in add/remove programs and in device manager. install the last uaa driver I posted and then install your sound blaster. __________________

12-08-2008, 06:08 PM	#10 (permalink)
Xenetos Registered User Join Date: Nov 2007 Posts: 7 OS: winxp	Re: No sound after installation awsome thanks alot man i got sound now i can hear youtube vids and can play cds in my pc

12-09-2008, 05:26 AM	#11 (permalink)
jaamac Registered User Join Date: Dec 2008 Posts: 1 OS: xp	Re: No sound after installation Iam mr jaamac; I have a problem for my pc I isntalled windows after that I get that my sound card updated with out sound ; I tried to make him un updated and I could not make that please help me

12-09-2008, 05:38 AM	#12 (permalink)
vladimirb Mentor Hardware Team Join Date: Mar 2008 Location: Banja Luka, Serb Republic Posts: 3,681 OS: xp pro sp3, Server 2003, Windows 7 Professional x64bit My System	Re: No sound after installation Hello jaamac.... Would be nice to make a new thread, explain in details what happened and what you did and post your system specifications... take care... __________________ MCP - MCSA Cisco SMB Account Manager

12-09-2008, 06:28 AM	#13 (permalink)
hitech Tech Hardware Team Join Date: Oct 2007 Location: Kansas Posts: 613 OS: Windows	Re: No sound after installation Your Welcome, Xenetos. Good work __________________