dvd-drive problem

kyle1212 · 05-09-2008, 05:49 PM

Ive posted this before but im not getting a response..

So i have a new rig and i brought my old DVD-DRIVE over to my new rig, when i try to boot from CD it says "BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" I set the first thing to boot in my BIOS as my CD Drive. Ive switched the IDE bands, and i know the Dvd drive works cause i used it in my old one and tested in a friends computer. Any ideas? This is also my first build.

THANKS.

PS: Also i dont have very powerful PSU (Getting a new one tomorw) its a 230watt, plus i have a 8400 gs, 2 gb of ram and a 2.8ghz single intel proc.

kyle1212 · 05-09-2008, 06:46 PM

Anybody?

kyle1212 · 05-10-2008, 11:20 AM

hellllooo.

bhahar84 · 05-10-2008, 02:55 PM

Hi kyle1212!

BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER is referring to the hard drive problem, not a dvd-drive. Can you check the cable connection on your hard drive, try to unplug and replug the cable for your hard drive and then try to restart the computer. If the same error message appear, try to change the IDE cable and reboot again. It should be detected by then

kyle1212 · 05-10-2008, 10:32 PM

Hey Thanks for the response. i replaced the cables and it didnt work. and i replaced the IDE one as well. Anything else?

dai · 05-11-2008, 02:38 AM

wait till you put in the new power supply
for agp it will need to put out a min of 18amps on the 12v+ line

kyle1212 · 05-11-2008, 02:25 PM

i have a pcie card.

dai · 05-11-2008, 02:28 PM

then you need the output to be 26amps min
http://www.newegg.com/Product/Produc...corsair%2b550w

kyle1212 · 05-11-2008, 02:41 PM

It's a 8400gs. Im going to get a powersupply on monday. (I was busy yesterday) and all the shops are closed today.

dai · 05-11-2008, 02:44 PM

have a read here
Power Supply Information and Selection

05-09-2008, 05:49 PM	#1 (permalink)
kyle1212 Registered User Join Date: May 2008 Posts: 66 OS: Windows XP SP2/ Mac OSX 10.4.9	dvd-drive problem Ive posted this before but im not getting a response.. So i have a new rig and i brought my old DVD-DRIVE over to my new rig, when i try to boot from CD it says "BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" I set the first thing to boot in my BIOS as my CD Drive. Ive switched the IDE bands, and i know the Dvd drive works cause i used it in my old one and tested in a friends computer. Any ideas? This is also my first build. THANKS. PS: Also i dont have very powerful PSU (Getting a new one tomorw) its a 230watt, plus i have a 8400 gs, 2 gb of ram and a 2.8ghz single intel proc.

05-09-2008, 06:46 PM	#2 (permalink)
kyle1212 Registered User Join Date: May 2008 Posts: 66 OS: Windows XP SP2/ Mac OSX 10.4.9	Re: dvd-drive problem Anybody?

05-10-2008, 11:20 AM	#3 (permalink)
kyle1212 Registered User Join Date: May 2008 Posts: 66 OS: Windows XP SP2/ Mac OSX 10.4.9	Re: dvd-drive problem hellllooo.

05-10-2008, 02:55 PM	#4 (permalink)
bhahar84 Mysterious Hardware Team Join Date: Jan 2008 Location: Malaysia Posts: 1,296 OS: Windows XP SP2, Vista Ultimate My System	Re: dvd-drive problem Hi kyle1212! BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER is referring to the hard drive problem, not a dvd-drive. Can you check the cable connection on your hard drive, try to unplug and replug the cable for your hard drive and then try to restart the computer. If the same error message appear, try to change the IDE cable and reboot again. It should be detected by then __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.

05-10-2008, 10:32 PM	#5 (permalink)
kyle1212 Registered User Join Date: May 2008 Posts: 66 OS: Windows XP SP2/ Mac OSX 10.4.9	Re: dvd-drive problem Hey Thanks for the response. i replaced the cables and it didnt work. and i replaced the IDE one as well. Anything else?

05-11-2008, 02:38 AM	#6 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 38,563 OS: vista 32x ultimate retail	Re: dvd-drive problem wait till you put in the new power supply for agp it will need to put out a min of 18amps on the 12v+ line __________________

05-11-2008, 02:25 PM	#7 (permalink)
kyle1212 Registered User Join Date: May 2008 Posts: 66 OS: Windows XP SP2/ Mac OSX 10.4.9	Re: dvd-drive problem i have a pcie card.

05-11-2008, 02:28 PM	#8 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 38,563 OS: vista 32x ultimate retail	Re: dvd-drive problem then you need the output to be 26amps min http://www.newegg.com/Product/Produc...corsair%2b550w __________________ Last edited by dai : 05-11-2008 at 02:29 PM.

05-11-2008, 02:41 PM	#9 (permalink)
kyle1212 Registered User Join Date: May 2008 Posts: 66 OS: Windows XP SP2/ Mac OSX 10.4.9	Re: dvd-drive problem It's a 8400gs. Im going to get a powersupply on monday. (I was busy yesterday) and all the shops are closed today.

05-11-2008, 02:44 PM	#10 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 38,563 OS: vista 32x ultimate retail	Re: dvd-drive problem have a read here Power Supply Information and Selection __________________