Cdrw/Dvd Multidrive Error

owm2 · 02-03-2008, 03:51 PM

I tried to replace the original Toshiba CD-RW/DVD-Rom Drive Model SD-R2212 With

Samsung DVD Writer model SN-S082H/BEBN Version H in my laptop.... Toshiba 1410-S173

I get an (IDE #1 Error) message at boot up, the computer then boots up, but no Drive “D” or any Optical Dive shows up in My Computer, Device Manager or System Information. Also Roxio doesn’t recognize a Drive

The BIOS is up-to-date

The Operating System is Win XP SP2 with all updates installed

ACPI BIOS Version 1.40 (Latest)

Device Config. = Setup by OS

Controller Mode = Auto-Selected

CD-Rom = Secondary IDE (170H/IRQ15) Not Adjustable

HDD = Primary IDE (1F0H/IRQ14) Not Adjustable

Any suggestions would be appreciated............

**bhahar84** · 02-06-2008, 07:19 AM

Hi owm2!!

Is your drive detected in BIOS?

owm2 · 02-06-2008, 01:17 PM

No, the drive is not detected in the BIOS. Also the drive doesn't show up in device manager or EzMC 9. I suspect it may be a master/slave/CSEL issue. Any thoughts???

**bhahar84** · 02-06-2008, 08:51 PM

Did it work right before? Or did it just failed recently?

owm2 · 02-07-2008, 11:11 AM

The original Toshiba CD-RW/DVD-Rom Drive Model SD-R2212 worked fine, but it was only a DVD-Rom drive. I wanted to upgrade to a DVD writer. As soon as I installed the new drive, the error message showed up.

**bhahar84** · 02-07-2008, 11:32 AM

Did you unplugged the previous DVD-Rom before installing the new DVD-writer? It seems like there is no much power for the drive there

owm2 · 02-07-2008, 01:17 PM

Nothing to unplug....slips out after removing screws and put new one in.........samsung advises this is compatible with toshiba model, however, got that ide #1 error message.........slipped that samsung into a sony laptop and it worked fine so it may be a toshiba problem even though it is supposedly compatible.......

**bhahar84** · 02-07-2008, 01:48 PM

Try to unplug it and replug it back. See whether it detected in BIOS again now?

02-03-2008, 03:51 PM	#1 (permalink)
owm2 Registered User Join Date: Feb 2008 Posts: 4 OS: Win XP SP2	Cdrw/Dvd Multidrive Error I tried to replace the original Toshiba CD-RW/DVD-Rom Drive Model SD-R2212 With Samsung DVD Writer model SN-S082H/BEBN Version H in my laptop.... Toshiba 1410-S173 I get an (IDE #1 Error) message at boot up, the computer then boots up, but no Drive “D” or any Optical Dive shows up in My Computer, Device Manager or System Information. Also Roxio doesn’t recognize a Drive The BIOS is up-to-date The Operating System is Win XP SP2 with all updates installed ACPI BIOS Version 1.40 (Latest) Device Config. = Setup by OS Controller Mode = Auto-Selected CD-Rom = Secondary IDE (170H/IRQ15) Not Adjustable HDD = Primary IDE (1F0H/IRQ14) Not Adjustable Any suggestions would be appreciated............

02-06-2008, 07:19 AM	#2 (permalink)
bhahar84 TSF Enthusiast Join Date: Jan 2008 Location: Malaysia Posts: 1,386 OS: Windows XP SP2, Vista Ultimate My System	Re: Cdrw/Dvd Multidrive Error Hi owm2!! Is your drive detected in BIOS? __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.[/center]

02-06-2008, 01:17 PM	#3 (permalink)
owm2 Registered User Join Date: Feb 2008 Posts: 4 OS: Win XP SP2	Re: Cdrw/Dvd Multidrive Error No, the drive is not detected in the BIOS. Also the drive doesn't show up in device manager or EzMC 9. I suspect it may be a master/slave/CSEL issue. Any thoughts???

02-06-2008, 08:51 PM	#4 (permalink)
bhahar84 TSF Enthusiast Join Date: Jan 2008 Location: Malaysia Posts: 1,386 OS: Windows XP SP2, Vista Ultimate My System	Re: Cdrw/Dvd Multidrive Error Did it work right before? Or did it just failed recently? __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.[/center]

02-07-2008, 11:11 AM	#5 (permalink)
owm2 Registered User Join Date: Feb 2008 Posts: 4 OS: Win XP SP2	Re: Cdrw/Dvd Multidrive Error The original Toshiba CD-RW/DVD-Rom Drive Model SD-R2212 worked fine, but it was only a DVD-Rom drive. I wanted to upgrade to a DVD writer. As soon as I installed the new drive, the error message showed up.

02-07-2008, 11:32 AM	#6 (permalink)
bhahar84 TSF Enthusiast Join Date: Jan 2008 Location: Malaysia Posts: 1,386 OS: Windows XP SP2, Vista Ultimate My System	Re: Cdrw/Dvd Multidrive Error Did you unplugged the previous DVD-Rom before installing the new DVD-writer? It seems like there is no much power for the drive there __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.[/center]

02-07-2008, 01:17 PM	#7 (permalink)
owm2 Registered User Join Date: Feb 2008 Posts: 4 OS: Win XP SP2	Re: Cdrw/Dvd Multidrive Error Nothing to unplug....slips out after removing screws and put new one in.........samsung advises this is compatible with toshiba model, however, got that ide #1 error message.........slipped that samsung into a sony laptop and it worked fine so it may be a toshiba problem even though it is supposedly compatible.......

02-07-2008, 01:48 PM	#8 (permalink)
bhahar84 TSF Enthusiast Join Date: Jan 2008 Location: Malaysia Posts: 1,386 OS: Windows XP SP2, Vista Ultimate My System	Re: Cdrw/Dvd Multidrive Error Try to unplug it and replug it back. See whether it detected in BIOS again now? __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.[/center]