Power Supply Transferable?

AdvanceScout · 09-09-2008, 10:17 AM

I'm working with a Dell Dimension 4700 that has thus far only been upgraded with an additional 1GB of RAM.

As part of an upgrade, the following parts were ordered:

GIGABYTE GA-EP35-DS3L LGA 775 Intel P35 ATX Intel Motherboard

SAPPHIRE 1017 Radeon HD 2600PRO 512MB 128-bit GDDR2 PCI Express x16 HDCP Ready Video Card

Intel Pentium E2180 Allendale 2.0GHz LGA 775 65W Dual-Core Processor Model BX80557E2180

The issue being that the motherboard does not fit in the case. So I've been asked to solve this problem, since apparently I know a lot about computers, which isn't really true.

From what I've managed to read in this time, the concern I have is whether or not the Dell parts will be transferable to a new case, particularly the power supply, since I've seen it listed as MicroATX in at least one place (though ATX in others), and I keep hearing that Dell computers are jealous. It seems to me like the PSU should at least be compatible with the motherboard, but I want to make sure that it will physically fit.

Also, budget is tight, so I'm hoping I can limit the additional expenses to a new case. This is what I'm currently considering: http://www.newegg.com/Product/Produc...82E16811147073

And I'd like to be able to ensure no further unforeseen occurences happen, so if there is anything that will get in the way of transferring the parts (or any other concerns, incompatibility or otherwise), please let me know.

Thanks for any help you can give.

Menegroth · 09-09-2008, 11:40 AM

Hey there. I am not a Technitian however i know a couple of things.

Lets srt off with: I didnt know there were PSU's build in the casing! :P However that shouldnt keep you from Knowing what cind of "juicer" your machine runs with. First glance sais you are prolly working with a PSU ranging from 300W-400W.

Your new system Seems really nice but if ur PSU runs with the above power then i suggest an upgrade. 550W or 600W even better. You can get multyple prices on them ranging from 50euro going up(as of today).

Now for the matter of the PSU being tranferable, i'de say "sure" it should be. Just open up ur casing, check out where the PSU's screwes are and gently remove it. Dont forget to remove the power cord, turn switch to off and press the "start" button on your computer to remove static (techs, if the last bit is a false step dont forget to inform). Also take notice of tthe power supply connectivity to your mother board. It should be a really fat complex of wires(usually neted together) that ends onto a bar witha costum 20pins with the choice of 4 more pins.

If u can remove the PSU you are fine. If not.. dont worry. A new one is prolly a better choice and wiser rather than experimenting. Take my words into consideration but wait for one of the Technitians of this Website to answer as well.

Good luck Bro.

09-09-2008, 10:17 AM	#1 (permalink)
AdvanceScout Registered User Join Date: Sep 2008 Posts: 1 OS: Windows XP SP2	Power Supply Transferable? I'm working with a Dell Dimension 4700 that has thus far only been upgraded with an additional 1GB of RAM. As part of an upgrade, the following parts were ordered: GIGABYTE GA-EP35-DS3L LGA 775 Intel P35 ATX Intel Motherboard SAPPHIRE 1017 Radeon HD 2600PRO 512MB 128-bit GDDR2 PCI Express x16 HDCP Ready Video Card Intel Pentium E2180 Allendale 2.0GHz LGA 775 65W Dual-Core Processor Model BX80557E2180 The issue being that the motherboard does not fit in the case. So I've been asked to solve this problem, since apparently I know a lot about computers, which isn't really true. From what I've managed to read in this time, the concern I have is whether or not the Dell parts will be transferable to a new case, particularly the power supply, since I've seen it listed as MicroATX in at least one place (though ATX in others), and I keep hearing that Dell computers are jealous. It seems to me like the PSU should at least be compatible with the motherboard, but I want to make sure that it will physically fit. Also, budget is tight, so I'm hoping I can limit the additional expenses to a new case. This is what I'm currently considering: http://www.newegg.com/Product/Produc...82E16811147073 And I'd like to be able to ensure no further unforeseen occurences happen, so if there is anything that will get in the way of transferring the parts (or any other concerns, incompatibility or otherwise), please let me know. Thanks for any help you can give.

09-09-2008, 11:40 AM	#2 (permalink)
Menegroth Registered User Join Date: Sep 2008 Posts: 6 OS: WinXP-Pro 32bit	Re: Power Supply Transferable? Hey there. I am not a Technitian however i know a couple of things. Lets srt off with: I didnt know there were PSU's build in the casing! :P However that shouldnt keep you from Knowing what cind of "juicer" your machine runs with. First glance sais you are prolly working with a PSU ranging from 300W-400W. Your new system Seems really nice but if ur PSU runs with the above power then i suggest an upgrade. 550W or 600W even better. You can get multyple prices on them ranging from 50euro going up(as of today). Now for the matter of the PSU being tranferable, i'de say "sure" it should be. Just open up ur casing, check out where the PSU's screwes are and gently remove it. Dont forget to remove the power cord, turn switch to off and press the "start" button on your computer to remove static (techs, if the last bit is a false step dont forget to inform). Also take notice of tthe power supply connectivity to your mother board. It should be a really fat complex of wires(usually neted together) that ends onto a bar witha costum 20pins with the choice of 4 more pins. If u can remove the PSU you are fine. If not.. dont worry. A new one is prolly a better choice and wiser rather than experimenting. Take my words into consideration but wait for one of the Technitians of this Website to answer as well. Good luck Bro.