DDr Ram 184pin 400mhz

Hasse · 11-26-2007, 11:21 AM

hello guys

I have a computer that have 512ram. I bought a new 1GB ram for it.>
> the problem is that when i install the new ram to my computer it stoped working. I tried to reinstal the computer but still didnt worked, I got error already in installning. So does any one have any Idea how to fix it?

nikola · 11-26-2007, 11:40 AM

I m not an expert but there are incompatibilitys with ram in generall.It has to do smthng with the voltage.First of all make sure you put it on the right slot(dimm1).Then enter bios setup and check any incompatibility adjustments you have to make on the memory page.You can try loading bios auto config.Third make sure that by putting the ram in place you did not couse any slight movement of the motherboard so that it doesnot work.What kind of error do u get?

Hasse · 11-26-2007, 01:01 PM

actually when first time i installed the memory my computer worked fine for one hour when i start and online game it shut itself down. and when i tried to restart it. a black window appeared and s tone sound played repeadly. and when i tried to reinstall the windows i got a blue page where it said something with physical memory, and than asked me to restart. and i got again a same screen.

I think as u said maybe it belongs to voltage because in every situation when i tried only with 512mb it works fine but whenever i extend it to 1gb of 1.5gb i get the prblems.

**Deleted090308** · 11-26-2007, 01:09 PM

Hi,
Are you sure the RAM is compatible with the motherboard?
Please read this: IMPORTANT! Before You Buy Memory

Hasse · 11-26-2007, 01:22 PM

Yeah i bought a 1gb ram than i changed it with my friends 2- 512mb ram.
So when i put only one of them it works. as i got from it, it works only 512mb or less on it, whenever i extend it more than 512 it stops.

Quote:

Originally Posted by eneles

Hi,
Are you sure the RAM is compatible with the motherboard?
Please read this: IMPORTANT! Before You Buy Memory

**Deleted090308** · 11-26-2007, 01:27 PM

What motherboard and what RAM do you have?
It's Windows XP you're using, correct?

Hasse · 11-26-2007, 01:34 PM

Quote:

Originally Posted by eneles

What motherboard and what RAM do you have?
It's Windows XP you're using, correct?

yeah its xp and my mother board is MS-7031 here is the link to the motherbord`s manual http://www.fujitsu-siemens.co.uk/rl/...MS-7031_uk.pdf

and the 2- 512mb ram is hynix 512mb ddr 400MHz CL3
and the 1gb which i tried before was Kingston ValueR pc3200 ddr-dimm, ecc, 400mhz cl3.

**speedster123** · 11-26-2007, 01:42 PM

try clearing the cmos.

Quote:

worked fine for one hour when i start and online game it shut itself down

we need your complete system specs including case fans and power supply info.

Hasse · 11-26-2007, 01:51 PM

I dont know where to find it so maybe this will be easier for u to get information about it.

Its Fujitsu Siemens
Product: SCALEO L EDITION -P /CBN SCALEOL ED300W/
Identification number: YSSE040085

Quote:

Originally Posted by speedster123

try clearing the cmos.

we need your complete system specs including case fans and power supply info.

**speedster123** · 11-26-2007, 02:10 PM

http://www.fujitsu-siemens.ie/home/p.../scaleo_p.html

is this your computer?
it shows ddr2 as memory

Hasse · 11-26-2007, 02:13 PM

and now when i clear cmos and start it i got same problem the computer continued to restart it self and when i load the bios to optimized default i got a distroyed blue screen.

Mine is an older version of scaleo L edition

Hasse · 11-26-2007, 02:35 PM

THis i found in the manual book
Technical data

Power drain when unit is switched off - ATX mains supply unit : <= 5W

Input voltage: 230V~ (optional wide range 100 V-240 V 50/60Hz)

Rated frequency: 50 Hz (60Hz)

Rated input current: 4A or 5A at 230V/50Hz (9A or 10 A att 115V/60Hz)

Operating conditions

Ambient temperature: 10....35 C 20...85% relative noncondensing humidity.

Transport temperature: -25C to 60C

Unit classification

Protective rating: 1
Faulting Class: 2
Over voltage category: ll

Hope this helps

**Deleted090308** · 11-27-2007, 01:53 AM

Make sure the CPU heatsink hasn't been displaced.
Reseat the video card (if you have one).
Check the power connections inside the case.
Start the computer with the original RAM only.

Hasse · 11-27-2007, 09:27 AM

Yes ty now it works when i have 1GBRam i took off 512 and puted only 1GB and it worked but the computer restarts himself some time maybe beacuse of the voltage??

**Deleted090308** · 11-27-2007, 10:46 AM

Any error messages before it restarts?
If not - turn automatic restart off:
Control panel > System > Click the "Advanced" tab > click Startup and recovery - Settings > Untick "Automatically restart" > Click OK.

Check the voltages and temperatures with SensorsView (link in my signature).

Hasse · 11-27-2007, 02:38 PM

THanks dude it seem to work

sensorsview
HDO:32 C/90 F
Cpu clock : 2660 MHz
does this program have alert or some thing that warn me when cpu gets warm? was just wondring beacuse i took off the Automatically restart.

Hasse · 11-27-2007, 03:33 PM

I was thinking about to buy a grafikcard for this computer shall i buy any specific card or any agp grafik card will work on this one.

**Deleted090308** · 11-27-2007, 11:46 PM

Let's make sure the computer is OK before buying a video card.

What's the CPU temperature and the +12V?

SensorsView can notify you if the computer gets too hot.
Turning automatic restart off makes you able to read any error messages (BSODs).
Overheating protection (if any) is usually managed by the motherboard - not Windows.

Hasse · 11-28-2007, 01:49 AM

when i start it, it says error to find some views

All i see in sensorsview is
HDO:32 C/90 F
Cpu clock : 2660 MHz

some times

HDO:32 C/115 F
Cpu clock : 2660 MHz

nothing more

**Deleted090308** · 11-28-2007, 02:50 AM

Look in BIOS under "PC Health Status" for temps and voltages.
Enable the "CPU warning temperature".

11-26-2007, 11:21 AM	#1 (permalink)
Hasse Registered User Join Date: Nov 2007 Posts: 33 OS: Vista Ultimate	DDr Ram 184pin 400mhz hello guys I have a computer that have 512ram. I bought a new 1GB ram for it.> > the problem is that when i install the new ram to my computer it stoped working. I tried to reinstal the computer but still didnt worked, I got error already in installning. So does any one have any Idea how to fix it?

11-26-2007, 11:40 AM	#2 (permalink)
nikola Registered User Join Date: Nov 2007 Posts: 2 OS: xp sp2	Re: DDr Ram 184pin 400mhz I m not an expert but there are incompatibilitys with ram in generall.It has to do smthng with the voltage.First of all make sure you put it on the right slot(dimm1).Then enter bios setup and check any incompatibility adjustments you have to make on the memory page.You can try loading bios auto config.Third make sure that by putting the ram in place you did not couse any slight movement of the motherboard so that it doesnot work.What kind of error do u get?

11-26-2007, 01:01 PM	#3 (permalink)
Hasse Registered User Join Date: Nov 2007 Posts: 33 OS: Vista Ultimate	Re: DDr Ram 184pin 400mhz actually when first time i installed the memory my computer worked fine for one hour when i start and online game it shut itself down. and when i tried to restart it. a black window appeared and s tone sound played repeadly. and when i tried to reinstall the windows i got a blue page where it said something with physical memory, and than asked me to restart. and i got again a same screen. I think as u said maybe it belongs to voltage because in every situation when i tried only with 512mb it works fine but whenever i extend it to 1gb of 1.5gb i get the prblems.

11-26-2007, 01:09 PM	#4 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: DDr Ram 184pin 400mhz Hi, Are you sure the RAM is compatible with the motherboard? Please read this: IMPORTANT! Before You Buy Memory

11-26-2007, 01:27 PM	#6 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: DDr Ram 184pin 400mhz What motherboard and what RAM do you have? It's Windows XP you're using, correct?

11-26-2007, 02:10 PM	#10 (permalink)
speedster123 Mentor Join Date: Oct 2006 Location: United States-New York-Long Island Posts: 5,219 OS: xp pro SP3	Re: DDr Ram 184pin 400mhz http://www.fujitsu-siemens.ie/home/p.../scaleo_p.html is this your computer? it shows ddr2 as memory __________________

11-26-2007, 02:13 PM	#11 (permalink)
Hasse Registered User Join Date: Nov 2007 Posts: 33 OS: Vista Ultimate	Re: DDr Ram 184pin 400mhz and now when i clear cmos and start it i got same problem the computer continued to restart it self and when i load the bios to optimized default i got a distroyed blue screen. Mine is an older version of scaleo L edition Last edited by Hasse; 11-26-2007 at 02:14 PM.

11-26-2007, 02:35 PM	#12 (permalink)
Hasse Registered User Join Date: Nov 2007 Posts: 33 OS: Vista Ultimate	Re: DDr Ram 184pin 400mhz THis i found in the manual book Technical data Power drain when unit is switched off - ATX mains supply unit : <= 5W Input voltage: 230V~ (optional wide range 100 V-240 V 50/60Hz) Rated frequency: 50 Hz (60Hz) Rated input current: 4A or 5A at 230V/50Hz (9A or 10 A att 115V/60Hz) Operating conditions Ambient temperature: 10....35 C 20...85% relative noncondensing humidity. Transport temperature: -25C to 60C Unit classification Protective rating: 1 Faulting Class: 2 Over voltage category: ll Hope this helps

11-27-2007, 01:53 AM	#13 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: DDr Ram 184pin 400mhz Make sure the CPU heatsink hasn't been displaced. Reseat the video card (if you have one). Check the power connections inside the case. Start the computer with the original RAM only.

11-27-2007, 09:27 AM	#14 (permalink)
Hasse Registered User Join Date: Nov 2007 Posts: 33 OS: Vista Ultimate	Re: DDr Ram 184pin 400mhz Yes ty now it works when i have 1GBRam i took off 512 and puted only 1GB and it worked but the computer restarts himself some time maybe beacuse of the voltage??

11-27-2007, 10:46 AM	#15 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: DDr Ram 184pin 400mhz Any error messages before it restarts? If not - turn automatic restart off: Control panel > System > Click the "Advanced" tab > click Startup and recovery - Settings > Untick "Automatically restart" > Click OK. Check the voltages and temperatures with SensorsView (link in my signature).

11-27-2007, 02:38 PM	#16 (permalink)
Hasse Registered User Join Date: Nov 2007 Posts: 33 OS: Vista Ultimate	Re: DDr Ram 184pin 400mhz THanks dude it seem to work sensorsview HDO:32 C/90 F Cpu clock : 2660 MHz does this program have alert or some thing that warn me when cpu gets warm? was just wondring beacuse i took off the Automatically restart.

11-27-2007, 03:33 PM	#17 (permalink)
Hasse Registered User Join Date: Nov 2007 Posts: 33 OS: Vista Ultimate	Re: DDr Ram 184pin 400mhz I was thinking about to buy a grafikcard for this computer shall i buy any specific card or any agp grafik card will work on this one.

11-27-2007, 11:46 PM	#18 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: DDr Ram 184pin 400mhz Let's make sure the computer is OK before buying a video card. What's the CPU temperature and the +12V? SensorsView can notify you if the computer gets too hot. Turning automatic restart off makes you able to read any error messages (BSODs). Overheating protection (if any) is usually managed by the motherboard - not Windows.

11-28-2007, 01:49 AM	#19 (permalink)
Hasse Registered User Join Date: Nov 2007 Posts: 33 OS: Vista Ultimate	Re: DDr Ram 184pin 400mhz when i start it, it says error to find some views All i see in sensorsview is HDO:32 C/90 F Cpu clock : 2660 MHz some times HDO:32 C/115 F Cpu clock : 2660 MHz nothing more Last edited by Hasse; 11-28-2007 at 01:50 AM.

11-28-2007, 02:50 AM	#20 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: DDr Ram 184pin 400mhz Look in BIOS under "PC Health Status" for temps and voltages. Enable the "CPU warning temperature".