Error....

12345678@9 · 02-25-2008, 03:17 PM

I Have Installed My Hp Printer Today, Every Time Start The Computer, Its Show This

12345678@9 · 03-01-2008, 03:51 AM

now this happen when i put any kind of USB.
COME ON GUYS, PLZ HELP.

THANKS

**bhahar84** · 03-01-2008, 08:08 AM

Did you finish up the installation of the printer yet? Try to follow the on-screen instructions until finish, then try to finish it, don't cancel it halfway. See if you still get the error again

12345678@9 · 03-02-2008, 08:00 AM

no, thats not it, its takes clouple of mintues says its done. but its keep happening

**bhahar84** · 03-02-2008, 10:29 AM

Try to open up the msconfig, you can do so by click Start, Run, type msconfig and hit Enter. Try to post all the list of programs on the startup tab on msconfig screen.

Or you can also download RunScanner and try to scan system using Beginner mode.

Make sure you select both the Do a full scan and save a log file option and the Save a binary .run file (Recommended) before clicking on Start Full Scan

Try to compressed the application file into compressed folder and post it as attachment on the next post, let me go through all the application on the system and try to identify the issue

12345678@9 · 03-03-2008, 12:15 PM

thank sir, for helping me

here is the file you sasked for

**bhahar84** · 03-04-2008, 01:32 PM

I have looked through the process, and so far it seems like everything is fine. Just a few errors, but its not likely related with this error message. I'll try to go through the list again to be sure.

Meanwhile, try to enter the safe mode. Did you still get the same message there?

12345678@9 · 03-06-2008, 12:39 AM

no this message doesn't happen in safe mode

**bhahar84** · 03-06-2008, 11:37 AM

Try to boot into normal mode. Then, open up Run, type in msconfig, hit Enter.

Choose the Selective startup, and remove checkmark from the load startup items, and leave others. Try to restart the computer, and see if the message appears?

12345678@9 · 03-07-2008, 12:44 AM

Yes Yes
Thank you, its not coming up now.
Thank you very much.

BUT DOES THIS HAVE ANY EFFECT ON MY ANITVIRUS OR THE FIREWALL?
WILL I STILL BE PROTECTED?

**bhahar84** · 03-08-2008, 09:36 PM

Hi 12345678@9!

Glad to hear that it worked. But it is still not resolved yet. Can you try go to the msconfig again, now choose the Normal Startup - load all device drivers and services. Then, try to post the screenshot of the list of startup programs like the picture below:

We may need to disable some of the startup programs to avoid you getting the error message here.

12345678@9 · 03-09-2008, 04:08 PM

i have reinstalled it. now its all right.

thanks anyway.

by the way, do you know how can i make my computer start up faster and work faster?

**bhahar84** · 03-10-2008, 08:57 AM

It was working fine now? Thats amazing

Do you want to speed up your computer? You can try to disable some of the windows appearance. Also, you can try to disable most of unusable programs from the startup list, since this always cause the computer to load up slow.

03-01-2008, 03:51 AM	#2 (permalink)
12345678@9 Registered User Join Date: Feb 2008 Posts: 93 OS: XP	Re: Error.... now this happen when i put any kind of USB. COME ON GUYS, PLZ HELP. THANKS

03-01-2008, 08:08 AM	#3 (permalink)
bhahar84 TSF Enthusiast Join Date: Jan 2008 Location: Malaysia Posts: 1,386 OS: Windows XP SP2, Vista Ultimate My System	Re: Error.... Did you finish up the installation of the printer yet? Try to follow the on-screen instructions until finish, then try to finish it, don't cancel it halfway. See if you still get the error again __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.[/center]

03-02-2008, 08:00 AM	#4 (permalink)
12345678@9 Registered User Join Date: Feb 2008 Posts: 93 OS: XP	Re: Error.... no, thats not it, its takes clouple of mintues says its done. but its keep happening

03-02-2008, 10:29 AM	#5 (permalink)
bhahar84 TSF Enthusiast Join Date: Jan 2008 Location: Malaysia Posts: 1,386 OS: Windows XP SP2, Vista Ultimate My System	Re: Error.... Try to open up the msconfig, you can do so by click Start, Run, type msconfig and hit Enter. Try to post all the list of programs on the startup tab on msconfig screen. Or you can also download RunScanner and try to scan system using Beginner mode. Make sure you select both the Do a full scan and save a log file option and the Save a binary .run file (Recommended) before clicking on Start Full Scan Try to compressed the application file into compressed folder and post it as attachment on the next post, let me go through all the application on the system and try to identify the issue __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.[/center]

03-04-2008, 01:32 PM	#7 (permalink)
bhahar84 TSF Enthusiast Join Date: Jan 2008 Location: Malaysia Posts: 1,386 OS: Windows XP SP2, Vista Ultimate My System	Re: Error.... I have looked through the process, and so far it seems like everything is fine. Just a few errors, but its not likely related with this error message. I'll try to go through the list again to be sure. Meanwhile, try to enter the safe mode. Did you still get the same message there? __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.[/center]

03-06-2008, 12:39 AM	#8 (permalink)
12345678@9 Registered User Join Date: Feb 2008 Posts: 93 OS: XP	Re: Error.... no this message doesn't happen in safe mode

03-06-2008, 11:37 AM	#9 (permalink)
bhahar84 TSF Enthusiast Join Date: Jan 2008 Location: Malaysia Posts: 1,386 OS: Windows XP SP2, Vista Ultimate My System	Re: Error.... Try to boot into normal mode. Then, open up Run, type in msconfig, hit Enter. Choose the Selective startup, and remove checkmark from the load startup items, and leave others. Try to restart the computer, and see if the message appears? __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.[/center]

03-07-2008, 12:44 AM	#10 (permalink)
12345678@9 Registered User Join Date: Feb 2008 Posts: 93 OS: XP	Re: Error.... Yes Yes Thank you, its not coming up now. Thank you very much. BUT DOES THIS HAVE ANY EFFECT ON MY ANITVIRUS OR THE FIREWALL? WILL I STILL BE PROTECTED?

03-08-2008, 09:36 PM	#11 (permalink)
bhahar84 TSF Enthusiast Join Date: Jan 2008 Location: Malaysia Posts: 1,386 OS: Windows XP SP2, Vista Ultimate My System	Re: Error.... Hi 12345678@9! Glad to hear that it worked. But it is still not resolved yet. Can you try go to the msconfig again, now choose the Normal Startup - load all device drivers and services. Then, try to post the screenshot of the list of startup programs like the picture below: We may need to disable some of the startup programs to avoid you getting the error message here. __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.[/center]

03-09-2008, 04:08 PM	#12 (permalink)
12345678@9 Registered User Join Date: Feb 2008 Posts: 93 OS: XP	Re: Error.... i have reinstalled it. now its all right. thanks anyway. by the way, do you know how can i make my computer start up faster and work faster? Last edited by 12345678@9; 03-09-2008 at 04:09 PM.

03-10-2008, 08:57 AM	#13 (permalink)
bhahar84 TSF Enthusiast Join Date: Jan 2008 Location: Malaysia Posts: 1,386 OS: Windows XP SP2, Vista Ultimate My System	Re: Error.... It was working fine now? Thats amazing Do you want to speed up your computer? You can try to disable some of the windows appearance. Also, you can try to disable most of unusable programs from the startup list, since this always cause the computer to load up slow. __________________ .:CPU-Z::Power Supply::Recuva::Unlocker::SensorsView::PSU Calculator::Everest:.[/center]