front audio connection help

warriorman_01 · 02-27-2005, 01:34 PM

what the difference between Line out_R & BLINE_OUT_R
i need to hook up my front audio and mic these are the wires i have from the front of my case
GND
MIC IN
MIC BIAS
R IN
R OUT
L IN
L OUT

ON MY MOTHERBOARD I HAVE
MIC2
AGND
MICPWR
+5VA
Line out_R &
BLINE_OUT_R
Line out_L
BLINE_OUT_L

I AM GUESSING THAT
MIC2 = MIC IN
GND = AGND
MICPWR = MIC BIAS
but the rest I am not sure
thanks alot for the help

02-27-2005, 03:01 PM

Hi,

Don’t know if this will help, but this is from an Antec Sonata Case and a P4C800-e deluxe motherboard. (also P4P800)

The pin assignments are:

Case……………..Motherboard
AUD GND………. AGND
FRONT-L……….. LINE_OUT_L
FRONT-R………. .LINE_OUT_R
MIC……………….MICPWR
MIC BIAS…………MIC2
RET-R……………. BLINE_OUT_R
RET-L…………….. BLINE_OUT_L

Leave the motherboard's +5VA and NC pins alone. Hope this helps.

Here is another sample that might help

Case ----->MB
BLUE ----->BLINE_OUT_L
RED --------->Line out_L
PURPLE ----->BLINE_OUT_R
YELLOW----->Line out_R
ORANGE----->MICPWR
GREEN ----->MIC2
BLACK ----->AGND

warriorman_01 · 02-28-2005, 02:25 PM

thank you very much but i am still trying to figure out these out
Line out_R
BLINE_OUT_R
Line out_L
BLINE_OUT_L
thanks again

02-27-2005, 01:34 PM	#1 (permalink)
warriorman_01 Registered User Join Date: Feb 2005 Posts: 3 OS: xp	front audio connection help what the difference between Line out_R & BLINE_OUT_R i need to hook up my front audio and mic these are the wires i have from the front of my case GND MIC IN MIC BIAS R IN R OUT L IN L OUT ON MY MOTHERBOARD I HAVE MIC2 AGND MICPWR +5VA Line out_R & BLINE_OUT_R Line out_L BLINE_OUT_L I AM GUESSING THAT MIC2 = MIC IN GND = AGND MICPWR = MIC BIAS but the rest I am not sure thanks alot for the help

02-28-2005, 02:25 PM	#3 (permalink)
warriorman_01 Registered User Join Date: Feb 2005 Posts: 3 OS: xp	thanks thank you very much but i am still trying to figure out these out Line out_R BLINE_OUT_R Line out_L BLINE_OUT_L thanks again

02-27-2005, 03:01 PM	#2 (permalink)
mark3567 Guest Posts: n/a OS:	Hi, Don’t know if this will help, but this is from an Antec Sonata Case and a P4C800-e deluxe motherboard. (also P4P800) The pin assignments are: Case……………..Motherboard AUD GND………. AGND FRONT-L……….. LINE_OUT_L FRONT-R………. .LINE_OUT_R MIC……………….MICPWR MIC BIAS…………MIC2 RET-R……………. BLINE_OUT_R RET-L…………….. BLINE_OUT_L Leave the motherboard's +5VA and NC pins alone. Hope this helps. Here is another sample that might help Case ----->MB BLUE ----->BLINE_OUT_L RED --------->Line out_L PURPLE ----->BLINE_OUT_R YELLOW----->Line out_R ORANGE----->MICPWR GREEN ----->MIC2 BLACK ----->AGND