Multiplying PCI\Vens, none with drivers

genella1 · 11-22-2008, 02:58 PM

It started with a missing driver for what was identified as a "multimedis controller" in the error message. The ID# came up as:
PCI\VEN_11DB&DEL_BEDE&SUBSYS_00221BD&REV_00\3&61AAA01&1&48
It required closing the "Intall New Hardware" wizard once each bootup.

Now the wizard pops up six or seven times for the following ids:
PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&50
PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&51
PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&52
PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&53
PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&55
PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&56
PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&57
PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&54

What's happening? What should I do? McAffee detects no virus.

**wrench97** · 11-22-2008, 05:58 PM

Open device manager do you see any Yellow question marks?

genella1 · 11-24-2008, 11:32 PM

Sorry for the delay: my SO tried to tackle the problem - no results

Yes, that's how I got the Id numbers. There are currently eight with ending numbers 50 thru 57

The yellow Question mark is under 'Other.'

**wrench97** · 11-25-2008, 01:30 AM

What cards do you have in the PCI and PCIe slots?
What brand and model pc

genella1 · 11-25-2008, 03:48 PM

A Compaq Presario with AMD Athlon XP 2400 2.00 ghz, 768 mb ram (yeah, prettty old).

My problem has morphed: I pulled out a cd drive that wasn't working and replaced it. The PCI event stopped, but now I only have one functioning cd drive - the new one, although the old drive wasn't touched - and a yellow flag on the USB receiver. I haven't done this before, but doesn't that mean there is a resource sharing problem?

Any suggestions would help.

**wrench97** · 11-25-2008, 04:02 PM

Ide drive right?
The old drive had the jumpers set to either master or slave check to little picture near the jumpers by the power and data connections and jumper the new drive the same way.
do that first then see if the usb problem goes away.

11-22-2008, 02:58 PM	#1 (permalink)
genella1 Registered User Join Date: Nov 2008 Location: Atlanta GA Posts: 3 OS: XP	Multiplying PCI\Vens, none with drivers It started with a missing driver for what was identified as a "multimedis controller" in the error message. The ID# came up as: PCI\VEN_11DB&DEL_BEDE&SUBSYS_00221BD&REV_00\3&61AAA01&1&48 It required closing the "Intall New Hardware" wizard once each bootup. Now the wizard pops up six or seven times for the following ids: PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&50 PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&51 PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&52 PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&53 PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&55 PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&56 PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&57 PCI\VEN_2008&DEV_0080&SUBSYS_0080200C&REV_OC\3&61AAA01&1&54 What's happening? What should I do? McAffee detects no virus. __________________ Genella

11-22-2008, 05:58 PM	#2 (permalink)
wrench97 Moderator, Hardware Team Join Date: May 2008 Location: S.E. Pennsylvania Posts: 18,544 OS: Win7	Re: Multiplying PCI\Vens, none with drivers Open device manager do you see any Yellow question marks? __________________ Power Supply and Selection

11-24-2008, 11:32 PM	#3 (permalink)
genella1 Registered User Join Date: Nov 2008 Location: Atlanta GA Posts: 3 OS: XP	Re: Multiplying PCI\Vens, none with drivers Sorry for the delay: my SO tried to tackle the problem - no results Yes, that's how I got the Id numbers. There are currently eight with ending numbers 50 thru 57 The yellow Question mark is under 'Other.' __________________ Genella Last edited by genella1; 11-24-2008 at 11:36 PM. Reason: additional ifo

11-25-2008, 01:30 AM	#4 (permalink)
wrench97 Moderator, Hardware Team Join Date: May 2008 Location: S.E. Pennsylvania Posts: 18,544 OS: Win7	Re: Multiplying PCI\Vens, none with drivers What cards do you have in the PCI and PCIe slots? What brand and model pc __________________ Power Supply and Selection

11-25-2008, 03:48 PM	#5 (permalink)
genella1 Registered User Join Date: Nov 2008 Location: Atlanta GA Posts: 3 OS: XP	Re: Multiplying PCI\Vens, none with drivers A Compaq Presario with AMD Athlon XP 2400 2.00 ghz, 768 mb ram (yeah, prettty old). My problem has morphed: I pulled out a cd drive that wasn't working and replaced it. The PCI event stopped, but now I only have one functioning cd drive - the new one, although the old drive wasn't touched - and a yellow flag on the USB receiver. I haven't done this before, but doesn't that mean there is a resource sharing problem? Any suggestions would help. __________________ Genella

11-25-2008, 04:02 PM	#6 (permalink)
wrench97 Moderator, Hardware Team Join Date: May 2008 Location: S.E. Pennsylvania Posts: 18,544 OS: Win7	Re: Multiplying PCI\Vens, none with drivers Ide drive right? The old drive had the jumpers set to either master or slave check to little picture near the jumpers by the power and data connections and jumper the new drive the same way. do that first then see if the usb problem goes away. __________________ Power Supply and Selection