Eddie's Fixes

**laboye** · 07-24-2006, 06:31 AM

This thread shall be dedicated to tutorials regarding fixes that are commonly told. My initial idea was to make linkt to the posts and put them in my signature. It will grow bigger as I get more ideas.

**laboye** · 07-24-2006, 11:24 AM

This tutorial will guide you through running a Windows XP Repair. Click a thumbnail to enlarge it in a separate window. Before we begin, here is some information you may need to know before continuing:

A Windows Repair does not alter or delete your documents.
A Windows Repair does not alter or delete any programs you have installed.
A Windows Repair will not get rid of active spyware and malware infections.
A Windows Repair will likely not get rid of a computer virus.
A Windows Repair will ask you for your CD-Key upon installation.
A Windows Repair will not ask you to activate Windows if your copy of Windows has already been activated.
A Windows Repair does the following:

Deletes the Windows folder on the specified installation.
Copies setup and essential files into a new Windows folder.
Restarts the computer.
Erases all Windows related registry entries, not altering any other entries or keys.
Searches for hardware and sets-up necessary drivers.
Installs entire Windows system including stock programs such as Outlook Express, Windows Media Player, etc.
Rebuilds the entire Windows registry
Restarts the computer.
Set's up general user settings (via Welcome Wizard)

The following steps will guide you through the repair process of Windows XP. I will be using Microsoft Windows XP Professional Corporate with SP2:

Boot off of the Windows XP CD by having the CD inserted before the system starts-up. If your computer does not give you the prompt in Figure 1a, you will need to follow the steps below. When you get the prompt, press any key on the keyboard.

Figure 1a:

a. If your POST gives you the option to "Boot from CD", "Enter Boot Menu" or words to that effect, press the respective key to start that function. Entering the boot menu will give you a screen similar to that in Figure 1b. In either case, select the option to boot from an "ATAPI device" or "CD-ROM Drive".

Figure 1b:

b. If you do not have that option, enter your BIOS setup program by pressing its key on the keyboard. It is usually shown during post as "Press -- to Enter Setup" or words to that effect. For a good list of keys to press, view this post by Zazula.
c. Once you have entered BIOS, browse around for a setting called "Boot Order" or "Boot Sequence" and use the keys (usually shown on the bottom) to change the boot order to the CD first, the Floppy (if applicable) second, the hard drive third and any network boot options last. If you have a system with predefined values, just make sure that the CD Drive boots before the Hard Drive and that Network Boot is after the hard drive. Figure 1c shows where my boot settings are.

Figure 1c:

d. After you restart your computer, you should be able to boot off of the CD.
Windows setup will detect your CD-Drive and show the screen in Figure 2.

Figure 2:
Windows setup will begin loading drivers needed to install Windows and show the screen in Figure 3.

Figure 3:
Windows will present you with the option to start setup, run recovery console or quit as shown in Figure 4. Press [Enter] to continue setup.

Figure 4:
Windows setup will present you with the EULA in Figure 5. Accept it by pressing [F8]

Figure 5:
Windows will search for installations of Windows using the screen in Figure 6.

Figure 6:
All of your installations will be listed in a screen similar to the one in Figure 7. Press [R] to begin the repair process.

Figure 7:
Windows setup will analyze the hard drive and begin deleting the existing files shown in the screen in Figure 8.

Figure 8:

This post continues below... Click here to go to the next section....http://www.techsupportforum.com/show...68&postcount=3

**laboye** · 07-24-2006, 01:42 PM

Windows will then begin copying the essential files needed for the rest of setup shown in Figure 9.

Figure 9:
Windows setup will create the initial configuration files and save them as in Figure 10.

Figure 10:
You will be prompted to restart the PC as in Figure 11. Press [Enter] to restart the computer.

Figure 11:
Allow the computer to start-up without intervention. You will be greeted by the Windows XP spash for just a second; shown in Figure 12.

Figure 12:
Windows GUI setup will begin, loading files from the CD in the background as shown in Figure 13.

Figure 13:
Windows setup will begin analyzing your hardware and installing any drivers available. This is shown in Figure 14.

Figure 14:
Next, you will be presented with the option to select regional settings as in Figure 15. Set what you wish and click Next to continue.

Figure 15:
Next, you must enter your product key per your system or Windows documentation. Type in your key and click next. This is shown in Figure 16.

Figure 16:
Windows setup will install the network with default settings. If it does not, just click next to accept the defaults. The network install is shown in Figure 17.

Figure 17:
Windows setup will finalize copies of the files and verify that all of the files are present in Figure 18.

Figure 18:

This post continues below... Click here to go to the next section.

**laboye** · 07-24-2006, 01:53 PM

Windows setup will install the start menu items as shown in Figure 19.

Figure 19:
Windows will begin rebuilding the registry as seen in Figure 20.

Figure 20:
Windows will finish writing registry values and save the remainder of settings to the hard drive as shown in Figure 21. Windows will also delete its temporary files and restart.

Figure 21:
Windows will restart and show its splash screen with "Please Wait". This is shown is Figure 22.

Figure 22:
You can now complete the Welcome Wizard to your own preferences. The Welcome Wizard is shown below in Figure 23.

Figure 23:

You have now successfully completed a Windows Repair.

tuarim · 09-02-2006, 11:26 AM

The Windows Repair will change one thing. If you use Outlook Express and it was configured with a password (even if you never had to type it in), you will need to re-enter it when Windows is repaired. According to Microsoft's own site, if the password is lost, there is no retrieving the emails in the folders you previously had.

Found out the hard way when a system needed to have that done and I had to scramble to find a password with my supervisor installed on it 2 years ago!! Oh Joy!!!

Sean

wishful · 09-05-2006, 12:31 AM

[quote=laboye;582080][list=1][*]Windows setup will install the start menu items as shown in Figure 19.

Question for you Laboye -

I run Win 98 2nd. edition. Will your fix work on mine also?

Zazula · 09-05-2006, 12:47 AM

http://www.techsupportforum.com/showpost.php?p=623545&postcount=2

**laboye** · 09-10-2006, 02:42 PM

The repair should retain the existing users along with their private data.

@wishful: No, Windows 98 does not have a procedure like this, but you may be able to reinstall it like normal without a format.

nathansdad04 · 10-21-2006, 10:22 PM

I tried the repair....I get to a black screen that says
Microsoft Windows XP Recovery Console
The Recovery Console provides system repair and recovery functionality.
Type EXIT to quit the recovery Console and restart the computer
C:\>

What do I type here?

nathansdad04 · 10-21-2006, 11:00 PM

Ok...I get to the part where it counts down to restart...when I let it restart it boots from the CD again and the process starts all over again,,,,should I remove the XP CD before it starts to restart? then do I reinsert the disc?

chauffeur2 · 10-21-2006, 11:20 PM

G'Day nathansdad04,

Just to jump in here, the computer will reboot a couple of times, just sit back and relax, and it will take you to the next step.
It needs to reboot to load the drivers and files properly.
The important thing is do not do anything...leave the cd in as well.

nathansdad04 · 10-22-2006, 08:56 PM

It worked...laptop is working well again...thanks

chauffeur2 · 10-22-2006, 09:00 PM

Quote:

Originally Posted by nathansdad04

It worked...laptop is working well again...thanks

That's Great News!!

I take it now all your issues have no been resolved...correct?

asieg33 · 11-24-2006, 02:48 PM

Help
repaired windows as per instructions. Everything went as expected,but I had to register due to hardware upgrades.
But, I have 2 sata and 2 ide drives.
bios shows all 4 drives, but windows does not show the ide drives.
Also could not repair netframe 2.0 due to failure of windows installer to install itself.
how do I get my ide drives back?
and netframe?
also scrolling in mozilla kinda sucks (CHOPPY)

thanks guys

**TheMatt** · 11-24-2006, 04:00 PM

Perhaps we should stick this thread.

asieg33 · 11-24-2006, 04:33 PM

Thanks anyway

figured it out

ide system drivers did not install with repair

manesh · 07-25-2007, 08:44 AM

Quote:

Originally Posted by laboye

Windows setup will install the start menu items as shown in Figure 19.

Figure 19:
Windows will begin rebuilding the registry as seen in Figure 20.

Figure 20:
Windows will finish writing registry values and save the remainder of settings to the hard drive as shown in Figure 21. Windows will also delete its temporary files and restart.

Figure 21:
Windows will restart and show its splash screen with "Please Wait". This is shown is Figure 22.

Figure 22:
You can now complete the Welcome Wizard to your own preferences. The Welcome Wizard is shown below in Figure 23.

Figure 23:

You have now successfully completed a Windows Repair.

I am using a Toshiba A30 satelite with XP Home edition. I am not a computer expert, just a user. Could you please explain the procedure for repair in windows XP Home edition?
Thanks.

**TheMatt** · 07-25-2007, 01:21 PM

The problem with this usually is that manufacturers supply you with a disk for restoring the laptop to the factory state but not an actual Windows XP disk. For the most part, you can't do a repair install without buying a new Windows XP retail disk.

**twajetmech** · 07-26-2007, 01:06 AM

Wonderful artical, I'd reccomend we sticky this !

**Deleted090308** · 07-26-2007, 01:17 AM

Great guide, but isn't laboye's article 1 year old? I also think it should be a sticky (after fixing a few graphic glitches). Anyway - it shouldn't be an ordinary thread.

07-24-2006, 06:31 AM	#1 (permalink)
laboye TSF Enthusiast Join Date: Apr 2006 Location: Hollywood, FL Posts: 1,246 OS: Windows xp Pro/Vista Beta 2/Ubuntu 6.06 LTS My System	Eddie's Fixes This thread shall be dedicated to tutorials regarding fixes that are commonly told. My initial idea was to make linkt to the posts and put them in my signature. It will grow bigger as I get more ideas. __________________ Repair Windows XP Guide --- Resolutions Crazy Computer that I'm saving up for::Antec P180 Case;PC Pwr&Cooling 1kW Quad SLI PSU;Asus P5N32-SLI SE Deluxe;Intel Core2 XE X6800;Corsair TWIN2XP2048 2GB PC2-6400 DDR2 RAM;2xAsus GeForce 7950 GX2;BFG PhysX Accel.;IBM DVD-RAM/Plextor DVD±RW;Seagate 750GB HD 7200RPM;WDX 150GB 10000RPM;Vigor Monsoon TEC Cooler

07-24-2006, 11:24 AM	#2 (permalink)
laboye TSF Enthusiast Join Date: Apr 2006 Location: Hollywood, FL Posts: 1,246 OS: Windows xp Pro/Vista Beta 2/Ubuntu 6.06 LTS My System	Windows XP Repair This tutorial will guide you through running a Windows XP Repair. Click a thumbnail to enlarge it in a separate window. Before we begin, here is some information you may need to know before continuing: A Windows Repair does not alter or delete your documents. A Windows Repair does not alter or delete any programs you have installed. A Windows Repair will not get rid of active spyware and malware infections. A Windows Repair will likely not get rid of a computer virus. A Windows Repair will ask you for your CD-Key upon installation. A Windows Repair will not ask you to activate Windows if your copy of Windows has already been activated. A Windows Repair does the following: Deletes the Windows folder on the specified installation. Copies setup and essential files into a new Windows folder. Restarts the computer. Erases all Windows related registry entries, not altering any other entries or keys. Searches for hardware and sets-up necessary drivers. Installs entire Windows system including stock programs such as Outlook Express, Windows Media Player, etc. Rebuilds the entire Windows registry Restarts the computer. Set's up general user settings (via Welcome Wizard) The following steps will guide you through the repair process of Windows XP. I will be using Microsoft Windows XP Professional Corporate with SP2: Boot off of the Windows XP CD by having the CD inserted before the system starts-up. If your computer does not give you the prompt in Figure 1a, you will need to follow the steps below. When you get the prompt, press any key on the keyboard. Figure 1a: a. If your POST gives you the option to "Boot from CD", "Enter Boot Menu" or words to that effect, press the respective key to start that function. Entering the boot menu will give you a screen similar to that in Figure 1b. In either case, select the option to boot from an "ATAPI device" or "CD-ROM Drive". Figure 1b: b. If you do not have that option, enter your BIOS setup program by pressing its key on the keyboard. It is usually shown during post as "Press -- to Enter Setup" or words to that effect. For a good list of keys to press, view this post by Zazula. c. Once you have entered BIOS, browse around for a setting called "Boot Order" or "Boot Sequence" and use the keys (usually shown on the bottom) to change the boot order to the CD first, the Floppy (if applicable) second, the hard drive third and any network boot options last. If you have a system with predefined values, just make sure that the CD Drive boots before the Hard Drive and that Network Boot is after the hard drive. Figure 1c shows where my boot settings are. Figure 1c: d. After you restart your computer, you should be able to boot off of the CD. Windows setup will detect your CD-Drive and show the screen in Figure 2. Figure 2: Windows setup will begin loading drivers needed to install Windows and show the screen in Figure 3. Figure 3: Windows will present you with the option to start setup, run recovery console or quit as shown in Figure 4. Press [Enter] to continue setup. Figure 4: Windows setup will present you with the EULA in Figure 5. Accept it by pressing [F8] Figure 5: Windows will search for installations of Windows using the screen in Figure 6. Figure 6: All of your installations will be listed in a screen similar to the one in Figure 7. Press [R] to begin the repair process. Figure 7: Windows setup will analyze the hard drive and begin deleting the existing files shown in the screen in Figure 8. Figure 8: *This post continues below... Click here to go to the next section....http://www.techsupportforum.com/show...68&postcount=3 __________________ Repair Windows XP Guide --- Resolutions Crazy Computer that I'm saving up for::Antec P180 Case;PC Pwr&Cooling 1kW Quad SLI PSU;Asus P5N32-SLI SE Deluxe;Intel Core2 XE X6800;Corsair TWIN2XP2048 2GB PC2-6400 DDR2 RAM;2xAsus GeForce 7950 GX2;BFG PhysX Accel.;IBM DVD-RAM/Plextor DVD±RW;Seagate 750GB HD 7200RPM;WDX 150GB 10000RPM;Vigor Monsoon TEC Cooler Last edited by dai; 08-11-2006 at 11:25 AM.*

07-24-2006, 01:42 PM	#3 (permalink)
laboye TSF Enthusiast Join Date: Apr 2006 Location: Hollywood, FL Posts: 1,246 OS: Windows xp Pro/Vista Beta 2/Ubuntu 6.06 LTS My System	Windows XP Repair (continued) Windows will then begin copying the essential files needed for the rest of setup shown in Figure 9. Figure 9: Windows setup will create the initial configuration files and save them as in Figure 10. Figure 10: You will be prompted to restart the PC as in Figure 11. Press [Enter] to restart the computer. Figure 11: Allow the computer to start-up without intervention. You will be greeted by the Windows XP spash for just a second; shown in Figure 12. Figure 12: Windows GUI setup will begin, loading files from the CD in the background as shown in Figure 13. Figure 13: Windows setup will begin analyzing your hardware and installing any drivers available. This is shown in Figure 14. Figure 14: Next, you will be presented with the option to select regional settings as in Figure 15. Set what you wish and click Next to continue. Figure 15: Next, you must enter your product key per your system or Windows documentation. Type in your key and click next. This is shown in Figure 16. Figure 16: Windows setup will install the network with default settings. If it does not, just click next to accept the defaults. The network install is shown in Figure 17. Figure 17: Windows setup will finalize copies of the files and verify that all of the files are present in Figure 18. Figure 18: *This post continues below... Click here to go to the next section.* __________________ Repair Windows XP Guide --- Resolutions Crazy Computer that I'm saving up for::Antec P180 Case;PC Pwr&Cooling 1kW Quad SLI PSU;Asus P5N32-SLI SE Deluxe;Intel Core2 XE X6800;Corsair TWIN2XP2048 2GB PC2-6400 DDR2 RAM;2xAsus GeForce 7950 GX2;BFG PhysX Accel.;IBM DVD-RAM/Plextor DVD±RW;Seagate 750GB HD 7200RPM;WDX 150GB 10000RPM;Vigor Monsoon TEC Cooler Last edited by dai; 07-26-2006 at 02:29 AM.

07-24-2006, 01:53 PM	#4 (permalink)
laboye TSF Enthusiast Join Date: Apr 2006 Location: Hollywood, FL Posts: 1,246 OS: Windows xp Pro/Vista Beta 2/Ubuntu 6.06 LTS My System	Windows XP Repair (continued) Windows setup will install the start menu items as shown in Figure 19. Figure 19: Windows will begin rebuilding the registry as seen in Figure 20. Figure 20: Windows will finish writing registry values and save the remainder of settings to the hard drive as shown in Figure 21. Windows will also delete its temporary files and restart. Figure 21: Windows will restart and show its splash screen with "Please Wait". This is shown is Figure 22. Figure 22: You can now complete the Welcome Wizard to your own preferences. The Welcome Wizard is shown below in Figure 23. Figure 23: You have now successfully completed a Windows Repair. __________________ Repair Windows XP Guide --- Resolutions Crazy Computer that I'm saving up for::Antec P180 Case;PC Pwr&Cooling 1kW Quad SLI PSU;Asus P5N32-SLI SE Deluxe;Intel Core2 XE X6800;Corsair TWIN2XP2048 2GB PC2-6400 DDR2 RAM;2xAsus GeForce 7950 GX2;BFG PhysX Accel.;IBM DVD-RAM/Plextor DVD±RW;Seagate 750GB HD 7200RPM;WDX 150GB 10000RPM;Vigor Monsoon TEC Cooler Last edited by dai; 07-26-2006 at 02:31 AM.

09-05-2006, 12:47 AM	#7 (permalink)
Zazula Manager Emeritus, I'm blond, James Blond Join Date: Apr 2006 Location: Athens, Greece Posts: 7,667 OS: Win XP Pro SP2	Data loss occurs after you reinstall, repair, or upgrade Windows XP http://www.techsupportforum.com/showpost.php?p=623545&postcount=2 __________________ "Time is the wisest because it discovers everything" Thales of Miletus (ca.624BC-ca.546BC) "Everything flows, nothing stands still." Heraclitus of Ephesus (ca.535BC-475BC) "One thing I know, that I know nothing" Socrates of Athens (ca.470BC–399BC)

09-02-2006, 11:26 AM	#5 (permalink)
tuarim Registered User Join Date: Aug 2006 Posts: 6 OS: xp	The Windows Repair will change one thing. If you use Outlook Express and it was configured with a password (even if you never had to type it in), you will need to re-enter it when Windows is repaired. According to Microsoft's own site, if the password is lost, there is no retrieving the emails in the folders you previously had. Found out the hard way when a system needed to have that done and I had to scramble to find a password with my supervisor installed on it 2 years ago!! Oh Joy!!! Sean

09-05-2006, 12:31 AM	#6 (permalink)
wishful Registered User Join Date: Sep 2005 Location: Iowa Posts: 11 OS: win 98 se	[quote=laboye;582080][list=1][*]Windows setup will install the start menu items as shown in Figure 19. Question for you Laboye - I run Win 98 2nd. edition. Will your fix work on mine also?

09-10-2006, 02:42 PM	#8 (permalink)
laboye TSF Enthusiast Join Date: Apr 2006 Location: Hollywood, FL Posts: 1,246 OS: Windows xp Pro/Vista Beta 2/Ubuntu 6.06 LTS My System	The repair should retain the existing users along with their private data. @wishful: No, Windows 98 does not have a procedure like this, but you may be able to reinstall it like normal without a format. __________________ Repair Windows XP Guide --- Resolutions Crazy Computer that I'm saving up for::Antec P180 Case;PC Pwr&Cooling 1kW Quad SLI PSU;Asus P5N32-SLI SE Deluxe;Intel Core2 XE X6800;Corsair TWIN2XP2048 2GB PC2-6400 DDR2 RAM;2xAsus GeForce 7950 GX2;BFG PhysX Accel.;IBM DVD-RAM/Plextor DVD±RW;Seagate 750GB HD 7200RPM;WDX 150GB 10000RPM;Vigor Monsoon TEC Cooler

10-21-2006, 10:22 PM	#9 (permalink)
nathansdad04 Registered User Join Date: Oct 2006 Posts: 19 OS: XP	I tried the repair....I get to a black screen that says Microsoft Windows XP Recovery Console The Recovery Console provides system repair and recovery functionality. Type EXIT to quit the recovery Console and restart the computer C:\> What do I type here?

10-21-2006, 11:00 PM	#10 (permalink)
nathansdad04 Registered User Join Date: Oct 2006 Posts: 19 OS: XP	Ok...I get to the part where it counts down to restart...when I let it restart it boots from the CD again and the process starts all over again,,,,should I remove the XP CD before it starts to restart? then do I reinsert the disc?

10-21-2006, 11:20 PM	#11 (permalink)
chauffeur2 Manager Emeritus Join Date: Feb 2006 Location: Adelaide, South Australia Posts: 10,180 OS: Xp Sp3 with all updates + Vista™ Ultimate SP1. My System	G'Day nathansdad04, Just to jump in here, the computer will reboot a couple of times, just sit back and relax, and it will take you to the next step. It needs to reboot to load the drivers and files properly. The important thing is do not do anything...leave the cd in as well. __________________ Dave T. Submit New Articles If it works, Don't fix it! Especially if Bill Gates had anything to do with it!! Last edited by chauffeur2; 10-21-2006 at 11:22 PM.

10-22-2006, 08:56 PM	#12 (permalink)
nathansdad04 Registered User Join Date: Oct 2006 Posts: 19 OS: XP	It worked...laptop is working well again...thanks

11-24-2006, 02:48 PM	#14 (permalink)
asieg33 Registered User Join Date: Nov 2006 Posts: 9 OS: xp sp1	repaired windows lost ide drives.... Help repaired windows as per instructions. Everything went as expected,but I had to register due to hardware upgrades. But, I have 2 sata and 2 ide drives. bios shows all 4 drives, but windows does not show the ide drives. Also could not repair netframe 2.0 due to failure of windows installer to install itself. how do I get my ide drives back? and netframe? also scrolling in mozilla kinda sucks (CHOPPY) thanks guys Last edited by asieg33; 11-24-2006 at 02:49 PM.

11-24-2006, 04:00 PM	#15 (permalink)
TheMatt TSF Enthusiast Join Date: May 2006 Location: Boston Posts: 13,701 OS: Win 3.1, 98, NT 4.0, XP Debian 4.0, Kubuntu 6.06 My System Blog Entries: 3	Perhaps we should stick this thread. __________________ - Matt M - KB1OSC - Folding@Home 85015 [url="http://www.techsupportforum.com/hardware-support/"] If TSF has helped you, please consider donating. If I have stopped responding to a thread, feel free to send me a PM with a link to the thread. It is advisable to subscribe to threads so you will receive updates when replies are posted. You can subscribe to threads from the "Thread Tools" Menu. »Memtest86 »Prime95 »UBCD »SpeedFan »NHC Personal »Everest »Sandra »PC Wizard »RivaTuner »ATi Tool Click here for Useful Articles and Guides

11-24-2006, 04:33 PM	#16 (permalink)
asieg33 Registered User Join Date: Nov 2006 Posts: 9 OS: xp sp1	ide drives Thanks anyway figured it out ide system drivers did not install with repair

07-26-2007, 01:06 AM	#19 (permalink)
twajetmech I helped the forums. Join Date: Jul 2004 Location: LGA, NYC Posts: 2,388 OS: XP-Pro Sp2 & XP-Pro Sp2 Tablet Edition, Vista Ultimate My System	Re: Eddie's Fixes Wonderful artical, I'd reccomend we sticky this ! __________________ PSU Selection/Info // Bench test // Thermal Paste // Memory Selection // Bios Beep Codes // CPU-Z// Posting System Specs

07-25-2007, 01:21 PM	#18 (permalink)
TheMatt TSF Enthusiast Join Date: May 2006 Location: Boston Posts: 13,701 OS: Win 3.1, 98, NT 4.0, XP Debian 4.0, Kubuntu 6.06 My System Blog Entries: 3	Re: Eddie's Fixes The problem with this usually is that manufacturers supply you with a disk for restoring the laptop to the factory state but not an actual Windows XP disk. For the most part, you can't do a repair install without buying a new Windows XP retail disk. __________________ - Matt M - KB1OSC - Folding@Home 85015 [url="http://www.techsupportforum.com/hardware-support/"] If TSF has helped you, please consider donating. If I have stopped responding to a thread, feel free to send me a PM with a link to the thread. It is advisable to subscribe to threads so you will receive updates when replies are posted. You can subscribe to threads from the "Thread Tools" Menu. »Memtest86 »Prime95 »UBCD »SpeedFan »NHC Personal »Everest »Sandra »PC Wizard »RivaTuner »ATi Tool Click here for Useful Articles and Guides

07-26-2007, 01:17 AM	#20 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: Eddie's Fixes Great guide, but isn't laboye's article 1 year old? I also think it should be a sticky (after fixing a few graphic glitches). Anyway - it shouldn't be an ordinary thread.