cmos checksum error press F1 to enter Bios F2 to install default bios settings

cgator · 11-24-2005, 08:24 AM

motherboard gigabyte GA-7ZXE
CPU duron 950 mhz
HDD Western Digital 40 gb Caviar
256 mb of ram
OS win2k pro
When the system is first booting i am getting a checksum error press F1 to enter bios F2 to load default bios settings. The problem is that the bios does not seem to reconize the keyboard because when I hit F2 to load the default settings it will not proceed in the boot or F1 to enter the bios settings. I am going to swap the battery but, I do not think this is the issue that is causing the boot to stop at the checksum error, not getting bad checksum which would lead me to beleive the battery is dead. one other thing that I notice is the nvram does not show that it is ok. The memory is loading showing the correct amount.

My question is will the nvram cause the system to freeze at the checksum error.

oldmn · 11-24-2005, 08:50 AM

Try replacing the CMOS battery. Replacement battery DL2032 or CR2032.

Mark07 · 11-24-2005, 08:57 AM

If the keyboard is wireless, and the transmitter plugs into a USB port, then you need to enable usb keyboard settings in the BIOS I think. Obviously you will need a non wireless keyboard to do this.

**linderman** · 11-24-2005, 09:33 AM

all replies above are very good advice / try those first >>> if they dont work then try a bios update >>> before you update your bios get a brief how to in here >>>> the DOS utility is the most reliable as long as you perform a few small simple steps first / read your mobo manual and review the DOS utility version

regards

joe

**keymaker** · 11-26-2005, 06:18 PM

its seems like a cmos battery issue.

11-24-2005, 08:24 AM	#1 (permalink)
cgator Registered User Join Date: Nov 2005 Posts: 1 OS: XP SP2	cmos checksum error press F1 to enter Bios F2 to install default bios settings motherboard gigabyte GA-7ZXE CPU duron 950 mhz HDD Western Digital 40 gb Caviar 256 mb of ram OS win2k pro When the system is first booting i am getting a checksum error press F1 to enter bios F2 to load default bios settings. The problem is that the bios does not seem to reconize the keyboard because when I hit F2 to load the default settings it will not proceed in the boot or F1 to enter the bios settings. I am going to swap the battery but, I do not think this is the issue that is causing the boot to stop at the checksum error, not getting bad checksum which would lead me to beleive the battery is dead. one other thing that I notice is the nvram does not show that it is ok. The memory is loading showing the correct amount. My question is will the nvram cause the system to freeze at the checksum error.

11-24-2005, 08:50 AM	#2 (permalink)
oldmn Registered User Join Date: Oct 2005 Location: Gig Harbor Wa Posts: 2,137 OS: XP Pro SP3 X 3 My System	Welcome to TSF Try replacing the CMOS battery. Replacement battery DL2032 or CR2032. __________________ AVG \| MEMTEST86 \| Zone Alarm \| XXCLONE \| Adaware \| Beyond Compare \| Everest If TSF has helped you, Tell us about it! or Donate to help keep the site up! Sorry no PM's for problems.[/center]

11-24-2005, 09:33 AM	#4 (permalink)
linderman Moderator, Hardware Team Join Date: May 2005 Posts: 19,370 OS: win 2000 pro / Win XP pro My System	all replies above are very good advice / try those first >>> if they dont work then try a bios update >>> before you update your bios get a brief how to in here >>>> the DOS utility is the most reliable as long as you perform a few small simple steps first / read your mobo manual and review the DOS utility version regards joe __________________ Even a Broken Clock is Right Twice a Day ! Power Supply Selection LEARN TO BACK-UP YOUR DATA FREE & EASY YouTube - Runtime Software DriveImage XML tutorial Last edited by linderman; 11-24-2005 at 09:35 AM.

11-26-2005, 06:18 PM	#5 (permalink)
keymaker Join Date: Jul 2005 Posts: 1,154 OS: windows xp	its seems like a cmos battery issue. __________________ AVG Spybot SpywareBlaster Adware CCleaner Diskeeper ZoneAlarm

11-24-2005, 08:57 AM	#3 (permalink)
Mark07 Registered User Join Date: Nov 2005 Posts: 92 OS: Win XP SP2	If the keyboard is wireless, and the transmitter plugs into a USB port, then you need to enable usb keyboard settings in the BIOS I think. Obviously you will need a non wireless keyboard to do this.