Front USB problem

Bunto90 · 07-01-2009, 10:13 AM

when I put USB in my 2 front USB drives it says :This USB device can perform faster if you connect it to Hi-Speed USB 2.0 port. And sending to USB or coping files from them is very slow.This problem wasnt early . Maybe is some driver problem ??? I have ASUS M2N-MX SE motherboard . I tried to find driver for USB driver on the CD of motherboard but there isnt. Help me . Thanks

HD_Monkey · 07-01-2009, 12:32 PM

Sounds like the 2 ports on your case are USB 1.0 and will not support 2.0 speeds. If you plug into rear USB ports you get 2.0 speeds right? Haven't replaced case mounted USB ports/cables, but that is an option. Or a new case.

If you get that message only when plugging into case mounted ports then it is definitely not driver related.

Stu_computer · 07-01-2009, 11:47 PM

hello Bunto, welcome to tsf.

the drivers for USB 2.0 are built into windows xp (must have at least service pack 1 installed).

to verify the driver is installed: right click my computer select device manager then double click universal serial bus controllers and verify one of the listed items has the words 'enhanced host'.

------------------------------
also, to check the bios settings reboot and press Del key then select advanced menu and key down to usb configuration, verify the settings are same as shown below.

Bunto90 · 07-03-2009, 08:52 AM

I have Sp3 and all that in bios is same...

Stu_computer · 07-03-2009, 04:06 PM

close all programs, you will need to reboot the computer when finished...

1. disconnect all usb devices (except keyboard, mouse)

2. click start -> right click My Computer -> Device Manager

3. double click 'Universal Serial Bus controllers' (to expand it)

4. find the item with 'Enhanced' and right click, select uninstall, click okay and it will uninstall, wait until windows reinstalls it, (only takes a few seconds).

5. reboot, (click Start -> Turn off Computer-> Restart), DO NOT connect any usb devices until windows has rebooted and displays desktop again.

07-01-2009, 10:13 AM	#1 (permalink)
Bunto90 Registered User Join Date: Jul 2009 Posts: 2 OS: xp	Front USB problem when I put USB in my 2 front USB drives it says :This USB device can perform faster if you connect it to Hi-Speed USB 2.0 port. And sending to USB or coping files from them is very slow.This problem wasnt early . Maybe is some driver problem ??? I have ASUS M2N-MX SE motherboard . I tried to find driver for USB driver on the CD of motherboard but there isnt. Help me . Thanks

07-01-2009, 12:32 PM	#2 (permalink)
HD_Monkey Tech Hardware Team Join Date: Apr 2008 Location: Texas Posts: 367 OS: XP x64 SP2 My System	Re: Front USB problem Sounds like the 2 ports on your case are USB 1.0 and will not support 2.0 speeds. If you plug into rear USB ports you get 2.0 speeds right? Haven't replaced case mounted USB ports/cables, but that is an option. Or a new case. If you get that message only when plugging into case mounted ports then it is definitely not driver related. __________________

07-03-2009, 08:52 AM	#4 (permalink)
Bunto90 Registered User Join Date: Jul 2009 Posts: 2 OS: xp	Re: Front USB problem I have Sp3 and all that in bios is same...

07-03-2009, 04:06 PM	#5 (permalink)
Stu_computer Tech Hardware Team Join Date: Jul 2005 Posts: 1,445 OS: Windows	Re: Front USB problem close all programs, you will need to reboot the computer when finished... 1. disconnect all usb devices (except keyboard, mouse) 2. click start -> right click My Computer -> Device Manager 3. double click 'Universal Serial Bus controllers' (to expand it) 4. find the item with 'Enhanced' and right click, select uninstall, click okay and it will uninstall, wait until windows reinstalls it, (only takes a few seconds). 5. reboot, (click Start -> Turn off Computer-> Restart), DO NOT connect any usb devices until windows has rebooted and displays desktop again. __________________