K8V SE Deluxe hangs before boot with SATA drive

dumbfounde · 12-03-2004, 08:38 AM

I'm helping a friend get his computer put together.
Equipment:
Asus K8V SE Deluxe, flashed to BIOS 1004
Maxtor 6Y080M0 SATA drive
ASUS V9520 series video (based on GeForce FX 5200)
1 GB (2 x 512) RAM, Kingston ValueMax, KVR400X64C3A/512 modules (on the Asus qualified vendors list)

The drive is connected to the SATA1 connector, not one of the RAID connectors, on the board.

The problem: system will come up and boot the XP install CD AS LONG AS THE SATA DRIVE IS NOT CONNECTED.

If I connect the SATA drive, the system will POST normally (and show the drive as connected), but as soon as the POST and config displays disappear, a flashing cursor appears, and I get a series of rapid beeps that does not stop. I have to power the system off to make it stop.

This doesn't appear to be a driver problem, as I'm not even to the point of needing a driver.

I've tried backing the DDR speed down to 366, and boosting the RAM voltage to 2.8V, to no avail.

Thoughts?

dai · 12-03-2004, 02:38 PM

have you installed the sata driver

dumbfounde · 12-04-2004, 01:58 PM

As I indicated in the original post, I can't get to the point where I NEED a driver. The machine hangs before it ever does anything with an operating system or boot loader.

dai · 12-05-2004, 09:09 AM

all i can suggest is check the jumpers on the drive and look in your manual to check the bios settings are correct

12-03-2004, 08:38 AM	#1 (permalink)
dumbfounde Registered User Join Date: Dec 2004 Posts: 2 OS: Mac OS	K8V SE Deluxe hangs before boot with SATA drive I'm helping a friend get his computer put together. Equipment: Asus K8V SE Deluxe, flashed to BIOS 1004 Maxtor 6Y080M0 SATA drive ASUS V9520 series video (based on GeForce FX 5200) 1 GB (2 x 512) RAM, Kingston ValueMax, KVR400X64C3A/512 modules (on the Asus qualified vendors list) The drive is connected to the SATA1 connector, not one of the RAID connectors, on the board. The problem: system will come up and boot the XP install CD AS LONG AS THE SATA DRIVE IS NOT CONNECTED. If I connect the SATA drive, the system will POST normally (and show the drive as connected), but as soon as the POST and config displays disappear, a flashing cursor appears, and I get a series of rapid beeps that does not stop. I have to power the system off to make it stop. This doesn't appear to be a driver problem, as I'm not even to the point of needing a driver. I've tried backing the DDR speed down to 366, and boosting the RAM voltage to 2.8V, to no avail. Thoughts?

12-04-2004, 01:58 PM	#3 (permalink)
dumbfounde Registered User Join Date: Dec 2004 Posts: 2 OS: Mac OS	Oh that I could NEED a driver As I indicated in the original post, I can't get to the point where I NEED a driver. The machine hangs before it ever does anything with an operating system or boot loader.

12-03-2004, 02:38 PM	#2 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 53,519 OS: vista 32x 64x ultimate retail	have you installed the sata driver

12-05-2004, 09:09 AM	#4 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 53,519 OS: vista 32x 64x ultimate retail	all i can suggest is check the jumpers on the drive and look in your manual to check the bios settings are correct