maxlewin

I would like to know what the maximum possible upgrade for this motherboard is. Thank You.

Property Value
Manufacturer Hewlett-Packard
Model 085Ch
Serial Number USU3390F3T

Chipset Vendor Intel Corporation
Chipset Model 82865G/PE/P, 82848P DRAM Controller / Host-Hub Interface
South Bridge 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge

CPU Intel Pentium 4 HT
Cpu Socket Socket 478 [XU1 PROCESSOR]
Processor Upgrade
Max CPU Speed 3200 MHz

System Slots 3 PCI, 1 AGP

Memory Summary
Location System board or motherboard
Maximum Capacity 4096 MBytes
Memory Slots 4
Error Correction None
Use System memory
Location System board or motherboard
Maximum Capacity 512 KBytes
Memory Slots 1
Error Correction None
Use Flash memory

Warning! Accuracy of DMI data cannot be guaranteed

HERE IS THE INSTALLED CPU INFO:

Property Value
Number of CPU(s) One Physical Processor / One Core / 2 Logical Processors
Vendor GenuineIntel
CPU Full Name Intel Pentium 4 HT
CPU Name Intel(R) Pentium(R) 4 CPU 2.60GHz
CPU Code Name Northwood
Technology 0.13µ
Platform Name Socket 478
Type Original OEM processor
FSB Mode QDR
Platform ID 2
Microcode ID 2E
Type ID 0
CPU Clock 2593.54
System Bus Clock -1.0
System Clock 199.50
Multiplier 13.00
Original Clock 2600.00
Original Bus Clock 800.00
Original System Clock 200.00
Original Multiplier 13.00
L2 Cache Speed 2593.54 MHz
L2 Cache Speed Full
CPU Family / Model / Stepping F / 2 / 9
Brand ID 09
HyperThreading 2
Cache 12 KµOps L1 T-Cache, 8 KB L1 D-Cache, 512 KB L2 Cache
Instructions MMX, SSE, SSE2, HT, HTT, MSR
Architecture x86

linderman

socket 478 @ 3.4mhz would be the max but if you have a 3.0ghz or higher now, then dont waste your time or $$$$$ there wont be much of a diff