[SOLVED] STOP: 0x0000009C and loads of problems - Page 2

**Deleted090308** · 11-24-2007, 04:57 AM

http://www.nvidia.com/object/nforce3_winxp_5.11

BTW - I just discovered that you're from Sweden too.

Zell · 11-24-2007, 05:08 AM

Ha, funny isn't it?

Drivrutinsinformation för NVIDIA IDE SW
---------------------------------

NVIDIA IDE SW-drivrutinen ersätter ATA-drivrutinerna (som medföljer Windows) med drivrutiner som är optimerade för nForce2/nForce3-baserade bordsdatorer.

NVIDIA IDE SW-drivrutinen minskar hindren i undersystemet för lagring, vilket gör det möjligt för processorn och annan maskinvara på systemnivå att bli mer produktiva och effektiva.

I de flesta fall är inte NVIDIA IDE SW-drivrutinen ett krav för att operativsystemet ska fungera ordentligt.
--

Translated, it basically means it replaces the original ATA-drivers that comes with Windows optimized for nForce 2/3-based stationary computers. It makes it easier for the processor to become more productive and effective. Usually NVIDIA IDE SW-driver is a demand for the OS to work properly.

I'll just plug in the HDD2 and test it out then!

Zell · 11-24-2007, 05:22 AM

Okay, so far it seems to working alright! Posting from the computer atm.

But while we are at it, I have something else I could use some help with.
HDD1 is partitioned into 2. D: always does CHKDSK upon booting, even if I shut down the computer properly, or never told it to do it.
Any ideas?

**Deleted090308** · 11-24-2007, 05:31 AM

No more errors? You were using a very old driver.

Run chkdsk /r on HDD1.

Zell · 11-24-2007, 05:36 AM

BCCode : 1000000a BCP1 : 00001B2C BCP2 : 00000002 BCP3 : 00000001
BCP4 : 8050886C OSVer : 5_1_2600 SP : 2_0 Product : 256_1

**Deleted090308** · 11-24-2007, 05:46 AM

When do you get this error? Is only HDD1 (Samsung) connected?

Zell · 11-24-2007, 05:51 AM

When I tried accessing data on HDD2. I was adding a rar-file and then boom! The computer turned black and rebooted. I got the error-report after I had rebooted.

I guess the only thing I can do now is dban the HDDs?

**Deleted090308** · 11-24-2007, 05:55 AM

Are you sure HDD2 is OK? Run chkdsk /r on it (all partitions).

Also - run SeaTools on HDD2.

Zell · 11-24-2007, 07:33 AM

HDD2 found one error when I ran Seatools. Repaired and passed.
Checking HDD1 too now.

**Deleted090308** · 11-24-2007, 07:36 AM

Are you using Samsung's tools for HDD1? You can't use Seatools.

Zell · 11-24-2007, 07:58 AM

I'm using
http://www.samsung.com/global/busine...rt_Shdiag.html

Zell · 11-24-2007, 08:03 AM

but noticed it doesn't support my model... so nvm I wont do it then

**Deleted090308** · 11-24-2007, 08:09 AM

Try HUTIL from Samsung instead.

Zell · 11-24-2007, 10:40 AM

For some reason it says it doesn't support my model

Zell · 11-24-2007, 11:55 AM

Okay, I'm in a dead end. Doesn't look like I can fix the computer keeping stuff. I am still having problems when HDD2 is plugged in

**Deleted090308** · 11-24-2007, 01:03 PM

Did you try another (80-wire) IDE cable?
Did you run the extended test on HDD2?

Zell · 11-24-2007, 01:26 PM

I tried 3 different IDE cables known to work in other computers.

And yes I did. In fact, I ran it more then once. After I repaired the error and started up the computer that rebooted.

I tested it once more. The error I had earlier was back. Fixed it again, ran the test once more and it found no error. Fixed the error again, ran the test, and it passed. Started the computer and it rebooted still.

The HDD2 seems pretty dead. Which leaves me with trying the dban-option, if I would assume right.

**Deleted090308** · 11-24-2007, 01:53 PM

If HDD2 is dead it won't help to "DBAN" it.
How are the hard drives hooked up? (master/slave/channel)

Zell · 11-24-2007, 02:27 PM

Well it is working except for the crashes while it is in, so I don't really know how dead it is. As linderman said it could be some software bug?
HDD1 is master, the DVD/cd-reader is master2, hdd 2 (and 3 that haven't arrived yet) is slave.

**Deleted090308** · 11-24-2007, 02:40 PM

Yes, it's probably a software problem.
But - you shouldn't get errors when running SeaTools.
Have you tried HDD2 as a slave on both IDE channels?

11-24-2007, 04:57 AM	#21 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: STOP: 0x0000009C and loads of problems http://www.nvidia.com/object/nforce3_winxp_5.11 BTW - I just discovered that you're from Sweden too.

11-24-2007, 05:08 AM	#22 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems Ha, funny isn't it? Drivrutinsinformation för NVIDIA IDE SW --------------------------------- NVIDIA IDE SW-drivrutinen ersätter ATA-drivrutinerna (som medföljer Windows) med drivrutiner som är optimerade för nForce2/nForce3-baserade bordsdatorer. NVIDIA IDE SW-drivrutinen minskar hindren i undersystemet för lagring, vilket gör det möjligt för processorn och annan maskinvara på systemnivå att bli mer produktiva och effektiva. I de flesta fall är inte NVIDIA IDE SW-drivrutinen ett krav för att operativsystemet ska fungera ordentligt. -- Translated, it basically means it replaces the original ATA-drivers that comes with Windows optimized for nForce 2/3-based stationary computers. It makes it easier for the processor to become more productive and effective. Usually NVIDIA IDE SW-driver is a demand for the OS to work properly. I'll just plug in the HDD2 and test it out then!

11-24-2007, 05:22 AM	#23 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems Okay, so far it seems to working alright! Posting from the computer atm. But while we are at it, I have something else I could use some help with. HDD1 is partitioned into 2. D: always does CHKDSK upon booting, even if I shut down the computer properly, or never told it to do it. Any ideas?

11-24-2007, 05:31 AM	#24 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: STOP: 0x0000009C and loads of problems No more errors? You were using a very old driver. Run chkdsk /r on HDD1.

11-24-2007, 05:36 AM	#25 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems BCCode : 1000000a BCP1 : 00001B2C BCP2 : 00000002 BCP3 : 00000001 BCP4 : 8050886C OSVer : 5_1_2600 SP : 2_0 Product : 256_1

11-24-2007, 05:46 AM	#26 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: STOP: 0x0000009C and loads of problems When do you get this error? Is only HDD1 (Samsung) connected?

11-24-2007, 05:51 AM	#27 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems When I tried accessing data on HDD2. I was adding a rar-file and then boom! The computer turned black and rebooted. I got the error-report after I had rebooted. I guess the only thing I can do now is dban the HDDs?

11-24-2007, 05:55 AM	#28 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: STOP: 0x0000009C and loads of problems Are you sure HDD2 is OK? Run chkdsk /r on it (all partitions). Also - run SeaTools on HDD2.

11-24-2007, 07:33 AM	#29 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems HDD2 found one error when I ran Seatools. Repaired and passed. Checking HDD1 too now.

11-24-2007, 07:36 AM	#30 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: STOP: 0x0000009C and loads of problems Are you using Samsung's tools for HDD1? You can't use Seatools.

11-24-2007, 07:58 AM	#31 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems I'm using http://www.samsung.com/global/busine...rt_Shdiag.html

11-24-2007, 08:03 AM	#32 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems but noticed it doesn't support my model... so nvm I wont do it then

11-24-2007, 08:09 AM	#33 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: STOP: 0x0000009C and loads of problems Try HUTIL from Samsung instead.

11-24-2007, 10:40 AM	#34 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems For some reason it says it doesn't support my model

11-24-2007, 11:55 AM	#35 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems Okay, I'm in a dead end. Doesn't look like I can fix the computer keeping stuff. I am still having problems when HDD2 is plugged in

11-24-2007, 01:03 PM	#36 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: STOP: 0x0000009C and loads of problems Did you try another (80-wire) IDE cable? Did you run the extended test on HDD2?

11-24-2007, 01:26 PM	#37 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems I tried 3 different IDE cables known to work in other computers. And yes I did. In fact, I ran it more then once. After I repaired the error and started up the computer that rebooted. I tested it once more. The error I had earlier was back. Fixed it again, ran the test once more and it found no error. Fixed the error again, ran the test, and it passed. Started the computer and it rebooted still. The HDD2 seems pretty dead. Which leaves me with trying the dban-option, if I would assume right.

11-24-2007, 01:53 PM	#38 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: STOP: 0x0000009C and loads of problems If HDD2 is dead it won't help to "DBAN" it. How are the hard drives hooked up? (master/slave/channel)

11-24-2007, 02:27 PM	#39 (permalink)
Zell Registered User Join Date: May 2007 Posts: 59 OS: XP Professional	Re: STOP: 0x0000009C and loads of problems Well it is working except for the crashes while it is in, so I don't really know how dead it is. As linderman said it could be some software bug? HDD1 is master, the DVD/cd-reader is master2, hdd 2 (and 3 that haven't arrived yet) is slave.

11-24-2007, 02:40 PM	#40 (permalink)
Deleted090308 Not... Join Date: Jan 2007 Posts: 22,277 OS: Xp	Re: STOP: 0x0000009C and loads of problems Yes, it's probably a software problem. But - you shouldn't get errors when running SeaTools. Have you tried HDD2 as a slave on both IDE channels?