Lenovo SL400c BSOD Windows 7!!!!

Thundaar · 10-04-2009, 02:16 AM

Quote:

Originally Posted by BSOD

A problem has been detected and Windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

Technical information:

*** STOP: 0x0000007B (0x80786B58, 0xC0000034, 0x00000000, 0x00000000

This is the error I'm getting on my Lenovo SL400c. I'm not sure what's causing it.

These are the steps I took to help fix it:

- I ran Windows 7 recovery, but after restarting upon completion the error showed up again.

- I tried using the F8 key to restore the last known good configuration on start-up.

Can anyone help me? This is pretty frustrating and I have no idea what's the cause of it.

joeten · 10-04-2009, 12:12 PM

Hi this is what i found on your issue it is based on xp and vista but should be the same for win7 0x0000007B: INACCESSIBLE_BOOT_DEVICE
(Click to consult the online MSDN article.)
Windows lost access to the system partition or boot volume during the startup process. Typical causes: Installing incorrect device drivers when installing or upgrading storage adapter hardware, or a virus.
After You Remove or Reinstall Roxio Easy CD Creator 5 Platinum Edition {KB 811408} Win XP
Stop 0x7B or “0x4,0,0,0” Error {KB 122926} Win NT, Win XP (on restart)
During setup (Sysprep issue) {KB 303786} Win XP
When You Press F6 to Load Drivers During Unattended Win XP Setup {KB 307099} Win XP
When you restart your Win XP-based computer {KB 316401} Win XP (after replacing motherboard)
When you start your computer from a WinPE CD-ROM or from a Server 2003 CD-ROM using a USB CD-ROM device {KB 839210} Win XP, Win Server 2003 (patch available)
Limited OEM driver support is available with F6 during Win XP & Server 2003 setup {KB 314859} Win XP, Win Server 2003
Error message When Starting Windows Vista After Changing SATA Mode of Boot Drive: STOP 0x0000007B INACCESSABLE_BOOT_DEVICE {KB 922976} Vista
Error message When Installing Vista on Computer With a DELL CERC SATA 1.5/6ch RAID controller: STOP 0x0000007B {KB 928632} Vista (needs driver update)

10-04-2009, 12:12 PM	#2 (permalink)
joeten Tech Hardware Team Join Date: Dec 2008 Posts: 3,216 OS: vista	Re: Lenovo SL400c BSOD Windows 7!!!! Hi this is what i found on your issue it is based on xp and vista but should be the same for win7 0x0000007B: INACCESSIBLE_BOOT_DEVICE (Click to consult the online MSDN article.) Windows lost access to the system partition or boot volume during the startup process. Typical causes: Installing incorrect device drivers when installing or upgrading storage adapter hardware, or a virus. After You Remove or Reinstall Roxio Easy CD Creator 5 Platinum Edition {KB 811408} Win XP Stop 0x7B or “0x4,0,0,0” Error {KB 122926} Win NT, Win XP (on restart) During setup (Sysprep issue) {KB 303786} Win XP When You Press F6 to Load Drivers During Unattended Win XP Setup {KB 307099} Win XP When you restart your Win XP-based computer {KB 316401} Win XP (after replacing motherboard) When you start your computer from a WinPE CD-ROM or from a Server 2003 CD-ROM using a USB CD-ROM device {KB 839210} Win XP, Win Server 2003 (patch available) Limited OEM driver support is available with F6 during Win XP & Server 2003 setup {KB 314859} Win XP, Win Server 2003 Error message When Starting Windows Vista After Changing SATA Mode of Boot Drive: STOP 0x0000007B INACCESSABLE_BOOT_DEVICE {KB 922976} Vista Error message When Installing Vista on Computer With a DELL CERC SATA 1.5/6ch RAID controller: STOP 0x0000007B {KB 928632} Vista (needs driver update) __________________