Can't see a harddrive

ed7360 · 05-03-2008, 05:19 PM

I have Vista installed. I have 3 SATA drives and external and 2 EIDE drives. When I now boot my machine I do not see my G drive which is an EIDE drive. I do however see my H drive which is also an EIDE drive connected to the same controller card. If I however boot up in safe mode I can see and access all my harddrives.. Need help..

dai · 05-03-2008, 07:24 PM

what brand are the ides and how are they jumpered
are you using an 80 wire cable on them

ed7360 · 05-05-2008, 10:51 AM

The master drive is a Maxtor 6Y250P0 250 ATA/133. The Slave is a WDC WD2500 JB-00GVA0 ATA/100. It is a 80 pin wire. After the computer totally boots up I lose the Maxtor drive. But again if I boot up in safe mode I can see and use the drive.

Thanks again for any help.

dai · 05-05-2008, 11:03 AM

check the jumpers are correct
try a new cable it may have a broken wire in it

05-03-2008, 05:19 PM	#1 (permalink)
ed7360 Registered User Join Date: May 2008 Location: NYC Posts: 2 OS: VISTA	Can't see a harddrive I have Vista installed. I have 3 SATA drives and external and 2 EIDE drives. When I now boot my machine I do not see my G drive which is an EIDE drive. I do however see my H drive which is also an EIDE drive connected to the same controller card. If I however boot up in safe mode I can see and access all my harddrives.. Need help..

05-03-2008, 07:24 PM	#2 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 53,599 OS: vista 32x 64x ultimate retail	Re: Can't see a harddrive what brand are the ides and how are they jumpered are you using an 80 wire cable on them __________________

05-05-2008, 10:51 AM	#3 (permalink)
ed7360 Registered User Join Date: May 2008 Location: NYC Posts: 2 OS: VISTA	Re: Can't see a harddrive The master drive is a Maxtor 6Y250P0 250 ATA/133. The Slave is a WDC WD2500 JB-00GVA0 ATA/100. It is a 80 pin wire. After the computer totally boots up I lose the Maxtor drive. But again if I boot up in safe mode I can see and use the drive. Thanks again for any help.

05-05-2008, 11:03 AM	#4 (permalink)
dai Manager, Hardware Forums Join Date: Jul 2004 Location: west australia Posts: 53,599 OS: vista 32x 64x ultimate retail	Re: Can't see a harddrive check the jumpers are correct try a new cable it may have a broken wire in it __________________