CausticSushi

First... My PC:
Windows XP Pro Service Pack 3 (was SP2 when problem occured)
4GB DDR2 RAM
XFX NVIDIA 8800 GeForce
ASUS M2N320-SLI Series
SoundMAX HD Audio
750W Corsair PSU

Every so often my pc with freeze up, skip around a bit and BSOD on me. It happens randomly or when its under a bit of stress from some loading in a game or something and sometimes i cant even get back into windows. It'll get past the windows loading screen and shut down again.

I was just able to log into my PC normally and record the windows error that had occurred, its as follows:

BCCode : 10000050 BCP1 : A85D89D8 BCP2 : 00000001 BCP3 : 805C0A35
BCP4 : 00000000 OSVer : 5_1_2600 SP : 3_0 Product : 256_1


C:\DOCUME~1\Steve\LOCALS~1\Temp\WER61cc.dir00\Mini062809-05.dmp
C:\DOCUME~1\Steve\LOCALS~1\Temp\WER61cc.dir00\sysdata.xml

---------------------------------------------------------------------------

BCCode : 10000050 BCP1 : B0E167A2 BCP2 : 00000000 BCP3 : 805A629E
BCP4 : 00000000 OSVer : 5_1_2600 SP : 3_0 Product : 256_1

C:\DOCUME~1\Steve\LOCALS~1\Temp\WER61cc.dir00\Mini062809-05.dmp
C:\DOCUME~1\Steve\LOCALS~1\Temp\WER61cc.dir00\sysdata.xm

---------------------------------------------------------------------------

I've tried updating to SP3, checkdisc, and updating my video drivers (couldnt find a driver for my sound) Any advice is worth trying. Im currently logged onto windows and ready to try something.

If im in the wrong forum i'm sorry i figured this might be appropriate. Please move me if not.

Riskyone101

Hello and Welcome to TSF,

Do you have your xp cd window installation disc?

CausticSushi

Hello. Yes i do

dai

turn off the auto reboot
control panel /system/advanced/startup and recovery settings
then untick the auto reboot box
post any bsod error messages the computer freezes on in full

run driver verifier

CausticSushi

OK so it took me a while to get a BSOD again but here it is in full:

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:

Check to be sure you have adequate disk space. If a driver is identified in this stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.

Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical Information:

*** STOP: 0x0000008E (0xC0000005, 0x8054BFD2, 0xB3D46974, 0x00000000)

Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.

After i started my pc again this showed up:

A problem has been detected and windows has been shut down to prevent damage to your computer.

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates your might need

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical Information:

*** STOP: 0x00000050 (0xA85D89DC, 0x00000001, 0x805C0A35, 0x00000000)

Beginning dump of physical memory
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.

dai

did you run driver verifier

post the mini dumps

C:\Windows\Minidump\Minidump.dmp

CausticSushi

The driver verifier returned:

DRIVER_IRQL_NOT_LESS_OR_EQUAL

Technical Information:

*** STOP: 0x000000D1 (0xE1F31A40, 0x00000002, 0x00000001, 0xB8451F3)

*** AegisP.sys Address B84510F3 base at B8450000, Datestamp 42a9a3e0



Also, I dont know how to post minidumps. I cant open the files.

Riskyone101

Are you using a belkin wireless adapter to access the internet?

CausticSushi

No im using a linksys.

Riskyone101

Whats the make and model number of it?

CausticSushi

Linksys Wireless-G WRTG54G

dai

reinstall your wireless driver

Riskyone101

Go here for the wireless driver:
http://www.linksysbycisco.com/US/en/support

To make sure you get a the most up to date one for the adapter.