need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from XP] - Page 2

**BCCOMP** · 01-13-2009, 03:39 PM

Hi,
Is there anything connected to them at this time?

garypriceomaha · 01-13-2009, 03:59 PM

You guys are going to think I'm smokin crack or something but I don't see any other pci cards in my system. The only other card is the video card. So I detached the 2 usb cords that run to the front of my pc from my mb thinking those might be conflicting but when I rebooted it still found all 3 usb root hub's....

**BCCOMP** · 01-13-2009, 04:10 PM

It will,

Reconnect the cables

Is there anything connected to these USB ports (printers,webcam,flash sticks, etc)?

I know you have done a clean install so you shoould have no Viruses or such causing 100% CPU USAGE.

I am just trying to narrow down the issue.
I do not think it is because of the USB, but I want to make sure there is nothing connected to these ports.

Can you post a screenshot of the DEVICE MANAGER with all the + opened.
Bill

garypriceomaha · 01-13-2009, 04:29 PM

Absolutely nothing attached to usb's. Here's the screenshots of my device manage. Once again, thanks for helping out.

garypriceomaha · 01-13-2009, 04:38 PM

Here's the task manager--flatlined at 100%

**justpassingby** · 01-13-2009, 04:54 PM

Quote:

Originally Posted by garypriceomaha

I disabled the on board usb's and put in a pci stack of usb's and it makes it work fine. (but the pci usb's are only 1.1--I had it laying around...

So you've already removed that pci card ?

Quote:

Originally Posted by garypriceomaha

These are also listed under the USB controllers tab

standard openhcd usb host controller (2 of these)
standard enhanced pci to usb host controller

I don't see why there would be a "standard enhanced pci to usb host controller" device on a fresh installation without any PCI to USB card in the computer. What do you think BCCOMP ?

garypriceomaha · 01-13-2009, 05:26 PM

yes, I removed the pci card. I left it in there when I installed windows this time but have taken it out. I tried to uninstall it but it just sits there.

I actually agree with you. Why is it listed if I don't have one in my pc?

Shall I reinstall windows again without the pci device in?

**BCCOMP** · 01-13-2009, 10:05 PM

Can I get a screenshot of the Processes Tab?
Thanks,
Bill

garypriceomaha · 01-13-2009, 11:29 PM

Sure.

garypriceomaha · 01-13-2009, 11:49 PM

Picture didn't take. try this one.

**BCCOMP** · 01-14-2009, 12:45 AM

Hi,
Is the BIOS set to default settings, with the exception
of PNP (Plug n Play) enabled?

Also see if this driver helps:
http://www.amd.com/us-en/Processors/...1_9706,00.html

Scroll down to the bottom of the page
Download and install:AMD Processor Driver Version 1.3.2.0053 for Windows XP and Windows Server 2003 (x86 and x64) -
3rd from the bottom of the page.
Thanks,
Bill

garypriceomaha · 01-14-2009, 08:47 AM

Tried that one. Didn't work. Did I mention that my usb's don't even work when I put a usb stick in them?

Yes, in bios I am on default settings.

garypriceomaha · 01-14-2009, 08:56 AM

With all 3 usb root hub disabled........back to 0%

**BCCOMP** · 01-14-2009, 09:16 AM

HI,
What is your BIOS version?

garypriceomaha · 01-14-2009, 09:27 AM

BIOS: Phoenix Technologies, LTD 6.00 PG 07/21/2005

garypriceomaha · 01-14-2009, 09:28 AM

Do you want the complete Belarc workup?

**BCCOMP** · 01-14-2009, 09:45 AM

Hi,
If you could run EVEREST under my signature and post the full report it would be better.
Copy and paste the report to notepad and attach it to the thread.
Thanks,
Bill

garypriceomaha · 01-14-2009, 10:47 AM

it says it was too long so I attached a txt file.

**justpassingby** · 01-14-2009, 10:48 AM

Quote:

Originally Posted by garypriceomaha

yes, I removed the pci card. I left it in there when I installed windows this time but have taken it out. I tried to uninstall it but it just sits there.

I actually agree with you. Why is it listed if I don't have one in my pc?

Shall I reinstall windows again without the pci device in?

This could be the issue, especially if it stalls when you try to uninstall the device in the device manager. Can't tell you that this is the problem for sure but the usb drivers for that card (default drivers were installed when the XP CD scanned the hardware during the installation) could be conflicting with the chipset drivers. If you have the time a clean reinstall without the pci card might help.

garypriceomaha · 01-14-2009, 11:00 AM

I've got the time but I've got to head off to work will reconvene tonight.

Thanks again.

01-13-2009, 03:39 PM	#21 (permalink)
BCCOMP Mod Hardware Team Join Date: Jul 2007 Location: New York Posts: 6,979 OS: Win XP SP3 / Windows 7 Beta / Open Suse My System	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from Hi, Is there anything connected to them at this time? __________________ PC Wizard \| Everest \| Power supply info \| Memtest86+ PC Running Slow Speedfan

01-13-2009, 03:59 PM	#22 (permalink)
garypriceomaha Registered User Join Date: Jan 2009 Posts: 58 OS: XP	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from You guys are going to think I'm smokin crack or something but I don't see any other pci cards in my system. The only other card is the video card. So I detached the 2 usb cords that run to the front of my pc from my mb thinking those might be conflicting but when I rebooted it still found all 3 usb root hub's....

01-13-2009, 04:10 PM	#23 (permalink)
BCCOMP Mod Hardware Team Join Date: Jul 2007 Location: New York Posts: 6,979 OS: Win XP SP3 / Windows 7 Beta / Open Suse My System	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from It will, Reconnect the cables Is there anything connected to these USB ports (printers,webcam,flash sticks, etc)? I know you have done a clean install so you shoould have no Viruses or such causing 100% CPU USAGE. I am just trying to narrow down the issue. I do not think it is because of the USB, but I want to make sure there is nothing connected to these ports. Can you post a screenshot of the DEVICE MANAGER with all the + opened. Bill __________________ PC Wizard \| Everest \| Power supply info \| Memtest86+ PC Running Slow Speedfan

01-13-2009, 05:26 PM	#27 (permalink)
garypriceomaha Registered User Join Date: Jan 2009 Posts: 58 OS: XP	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from yes, I removed the pci card. I left it in there when I installed windows this time but have taken it out. I tried to uninstall it but it just sits there. I actually agree with you. Why is it listed if I don't have one in my pc? Shall I reinstall windows again without the pci device in?

01-13-2009, 10:05 PM	#28 (permalink)
BCCOMP Mod Hardware Team Join Date: Jul 2007 Location: New York Posts: 6,979 OS: Win XP SP3 / Windows 7 Beta / Open Suse My System	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from Can I get a screenshot of the Processes Tab? Thanks, Bill __________________ PC Wizard \| Everest \| Power supply info \| Memtest86+ PC Running Slow Speedfan

01-13-2009, 11:29 PM	#29 (permalink)
garypriceomaha Registered User Join Date: Jan 2009 Posts: 58 OS: XP	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from Sure.

01-14-2009, 12:45 AM	#31 (permalink)
BCCOMP Mod Hardware Team Join Date: Jul 2007 Location: New York Posts: 6,979 OS: Win XP SP3 / Windows 7 Beta / Open Suse My System	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from Hi, Is the BIOS set to default settings, with the exception of PNP (Plug n Play) enabled? Also see if this driver helps: http://www.amd.com/us-en/Processors/...1_9706,00.html Scroll down to the bottom of the page Download and install:AMD Processor Driver Version 1.3.2.0053 for Windows XP and Windows Server 2003 (x86 and x64) - 3rd from the bottom of the page. Thanks, Bill __________________ PC Wizard \| Everest \| Power supply info \| Memtest86+ PC Running Slow Speedfan Last edited by BCCOMP; 01-14-2009 at 01:38 AM.

01-14-2009, 08:47 AM	#32 (permalink)
garypriceomaha Registered User Join Date: Jan 2009 Posts: 58 OS: XP	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from Tried that one. Didn't work. Did I mention that my usb's don't even work when I put a usb stick in them? Yes, in bios I am on default settings.

01-14-2009, 09:16 AM	#34 (permalink)
BCCOMP Mod Hardware Team Join Date: Jul 2007 Location: New York Posts: 6,979 OS: Win XP SP3 / Windows 7 Beta / Open Suse My System	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from HI, What is your BIOS version? __________________ PC Wizard \| Everest \| Power supply info \| Memtest86+ PC Running Slow Speedfan

01-14-2009, 09:27 AM	#35 (permalink)
garypriceomaha Registered User Join Date: Jan 2009 Posts: 58 OS: XP	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from BIOS: Phoenix Technologies, LTD 6.00 PG 07/21/2005

01-14-2009, 09:28 AM	#36 (permalink)
garypriceomaha Registered User Join Date: Jan 2009 Posts: 58 OS: XP	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from Do you want the complete Belarc workup?

01-14-2009, 09:45 AM	#37 (permalink)
BCCOMP Mod Hardware Team Join Date: Jul 2007 Location: New York Posts: 6,979 OS: Win XP SP3 / Windows 7 Beta / Open Suse My System	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from Hi, If you could run EVEREST under my signature and post the full report it would be better. Copy and paste the report to notepad and attach it to the thread. Thanks, Bill __________________ PC Wizard \| Everest \| Power supply info \| Memtest86+ PC Running Slow Speedfan

01-14-2009, 11:00 AM	#40 (permalink)
garypriceomaha Registered User Join Date: Jan 2009 Posts: 58 OS: XP	Re: need chipset/usb drivers for Gateway eMachine T6524 (100% cpu usage) [moved from I've got the time but I've got to head off to work will reconvene tonight. Thanks again.