Remote Control Molex Connector Kit Troubles - Page 2

**magnethead** · 04-29-2008, 10:27 AM

Quote:

Originally Posted by Done_Fishin

No, what I am saying is that this unit you bought works on 12 Volts and that the input can be 12 volts =/- a couple of volts AND that the item to which it is being connected should also work off of 12V or whatever voltage is being fed into it. Remember that this was originally manufactured for use in cars which work on 12Volts , but the battery when fully charged will be approx 14 Volts.

so if your gun works off of a 6 Volt battery (or pack) and you try using this, it probably won't work.

right.

Put yellow Power supply to red controller.
Put black Power Supply to either black controller ground.
Put white to positive of whatever you're driving with the controller, put remaining black to ground of whatever you're driving with the controller.

But whatever you're driving with the controller MUST be a 12 volt device.

**Done_Fishin** · 04-29-2008, 01:05 PM

Also if you replace the voltage source for your gun with a 12V source from elsewhere and your gun doesn't work off of 12Volts but less ( like for instance 6Volts) then ther is every possibility that your gun will burn out ..