USB connector problem

**cdpaul** · 05-06-2008, 02:21 AM

Hi guys,

Im trying to install the MB from a pc into a new case but the USB and Audio connectors dont fit.

Firstly the USB has 5 pairs of pins on the board but the connector only has 4 pairs of cable and 1 pinhole is blanked off so the connector wont fit.

The cable for the 2x front usbs has (from left to right) red>white>green>black>empty.

The MB pin configuration is attached.

I would appreciate any help on resolving this and if it IS possible i will post the similar problem with Audio.

Thanx in advance
Paul

2pistolpacker · 05-10-2008, 06:18 AM

You are not going to be able to use the front usb ports as they are wired, there are several ways the cases front usb wires are sold. Your motherboard needs the wires for each port separated into two flat 4 wire connectors so each one can be turned around to match the VCC (red wire) to the #1 and #10 positive pins. A single connector usually has both positive wires at the same end and if attached will cause a short and burn a hole in your motherboard(it has happened to me). Mike

**cdpaul** · 05-10-2008, 07:36 AM

Ok, thanx. I was hoping there was a solution but i can see the mb pin configuration doesnt seem to be standard.

Thanx 4 looking in :-)

05-10-2008, 06:18 AM	#2 (permalink)
2pistolpacker TECH HARDWARE TEAM Join Date: Dec 2007 Location: Lenexa, Ks Posts: 1,038 OS: Win XP Pro My System	Re: USB connector problem You are not going to be able to use the front usb ports as they are wired, there are several ways the cases front usb wires are sold. Your motherboard needs the wires for each port separated into two flat 4 wire connectors so each one can be turned around to match the VCC (red wire) to the #1 and #10 positive pins. A single connector usually has both positive wires at the same end and if attached will cause a short and burn a hole in your motherboard(it has happened to me). Mike __________________ Speak kindly to me, beloved master. Revel in my unconditional love, and give me every minute that you can spare, for my time with you is short. --Your faithful dog

05-10-2008, 07:36 AM	#3 (permalink)
cdpaul I helped the forums. Join Date: Oct 2007 Posts: 77 OS: XP PRO	Re: USB connector problem Ok, thanx. I was hoping there was a solution but i can see the mb pin configuration doesnt seem to be standard. Thanx 4 looking in :-)