[SOLVED] crashed and burned new PC

joeitalo · 03-23-2008, 02:40 PM

I got the BSOD and every message I got the chance to read seemed to be different I managed to get bad_pool_error something about NTSF,and can't read or fing DLL , I am completely at a loss for solutions.The only sure mistake I know I made is when I did my first boot it failed because one of my memory strips (RAM) was not seated. I inspected it for damage and reinstalled it and I got start up and have been running for about 2 weeks. I added a brand HD, but seemed to be an older version western digital HD and it continued to work..I cloned my OS from the seagate 320g to the western digital 180g. I should have paid more attention to time and dates but I did not , I am almost possitive this is when my headaches began but why OK hear is the hard part I will admit.. I did run a reg cleaner and for whatever reason I do regret because I can also add that to maybe its this or that .I don't know how to proceed any sugestions , input ,a dummy slap. Help is seriously apreciated I spent a few bucks and I and as some of you know this is my first build so I could have done anything or everything wrong. Thanks guys and Happy Easter.Hey maybe the Bunny broke it

joeitalo · 03-23-2008, 04:02 PM

OK here what Ive done I chaecked all my connections,and everything is plugged in tightly and according to the direction I was given with the mother board diag. I got it to boot from cddvd and I am reformatting and installing vista home premium.. CAN anyone tell me what a bad pool error means from the blue screen. that was the message I got on two episodes.

**Doby** · 03-23-2008, 06:39 PM

Typically a "bad pool caller" error is a bad or buggy driver

Look here http://aumha.org/a/stop.htm

On this reinstall get all the latest motherboard drivers from your motherboard manufactuers website, same with video card and any other cards you have installed

joeitalo · 03-23-2008, 06:58 PM

hey doby thanks and I am OK so far I did what I said in my last RE and so far so good .I will continue to reinstall hardware slowly one at a time and leave some time in between incase it is hardware .I have an Idea what went wrong but I am not positive and I don't want to misinform anyone who might have the same problem and reading this if I do confirm anything I will post it thanks again

03-23-2008, 02:40 PM	#1 (permalink)
joeitalo Registered User Join Date: Nov 2007 Location: Boston Mass Posts: 191 OS: Vista Home Premium My System	[SOLVED] crashed and burned new PC I got the BSOD and every message I got the chance to read seemed to be different I managed to get bad_pool_error something about NTSF,and can't read or fing DLL , I am completely at a loss for solutions.The only sure mistake I know I made is when I did my first boot it failed because one of my memory strips (RAM) was not seated. I inspected it for damage and reinstalled it and I got start up and have been running for about 2 weeks. I added a brand HD, but seemed to be an older version western digital HD and it continued to work..I cloned my OS from the seagate 320g to the western digital 180g. I should have paid more attention to time and dates but I did not , I am almost possitive this is when my headaches began but why OK hear is the hard part I will admit.. I did run a reg cleaner and for whatever reason I do regret because I can also add that to maybe its this or that .I don't know how to proceed any sugestions , input ,a dummy slap. Help is seriously apreciated I spent a few bucks and I and as some of you know this is my first build so I could have done anything or everything wrong. Thanks guys and Happy Easter.Hey maybe the Bunny broke it Last edited by joeitalo; 03-23-2008 at 02:50 PM. Reason: spelling

03-23-2008, 04:02 PM	#2 (permalink)
joeitalo Registered User Join Date: Nov 2007 Location: Boston Mass Posts: 191 OS: Vista Home Premium My System	Re: crashed and burned new PC OK here what Ive done I chaecked all my connections,and everything is plugged in tightly and according to the direction I was given with the mother board diag. I got it to boot from cddvd and I am reformatting and installing vista home premium.. CAN anyone tell me what a bad pool error means from the blue screen. that was the message I got on two episodes.

03-23-2008, 06:39 PM	#3 (permalink)
Doby Moderator Hardware Team Join Date: Jan 2006 Location: Central PA (USA) Posts: 8,104 OS: XP sp2/ Vista My System	Re: crashed and burned new PC Typically a "bad pool caller" error is a bad or buggy driver Look here http://aumha.org/a/stop.htm On this reinstall get all the latest motherboard drivers from your motherboard manufactuers website, same with video card and any other cards you have installed __________________ Would you like to help TSF fight cancer and other diseases??? JOIN TEAM TSF

03-23-2008, 06:58 PM	#4 (permalink)
joeitalo Registered User Join Date: Nov 2007 Location: Boston Mass Posts: 191 OS: Vista Home Premium My System	Re: crashed and burned new PC hey doby thanks and I am OK so far I did what I said in my last RE and so far so good .I will continue to reinstall hardware slowly one at a time and leave some time in between incase it is hardware .I have an Idea what went wrong but I am not positive and I don't want to misinform anyone who might have the same problem and reading this if I do confirm anything I will post it thanks again