[SOLVED] Star Wars Republic Commando pls help!!!!

[TATAR]

Hi..I have SW Republic Commando..and i have this PC spesifications: OS Windows XP SP 3
Processor:Intel Dual Core E8400 3Ghz
Ram: 3Gb
video card: Sapphire Radeon HD 4670 1Gb
and i start the game evrything is fine and when i click on "New Game" the game exits and the "Send" and "Don't send Error" message appers what's the problem??

[Mcninjaguy]

Can you post the full error message?

Try installing the latest directx 9
http://www.microsoft.com/downloads/t...2IXFvDRg%3d%3d

Run driver sweeper to get rid of your old driver
http://www.guru3d.com/category/driversweeper/

Install the latest graphics card driver (display driver only)
http://game.amd.com/us-en/drivers_ca...=xp/radeonx-xp

[TATAR]

Sure here it is...the title on the window says:SWRepublicCommando.exe
SWRepublicCommando.exe has encountered a problem and needs to close.We are sry for the incinvenience.
If u were in the middle of smth,the iformation you were working on might be lost.
Pls tell Microsoft about this problem.We have created an error report that you can send to us.We will treat this report as confident and anonymous.To see what data this report contains,click here...and the erreos is:Error signature AppName;swrepubliccommando.exe AppVer: 0.0.0.0 ModName: unknown ModVer:0.0.0.0 Offset: 6c707544 and if i see the technical information about the error report,click here...well it's allot..if u whant i can write it to u just say :)

[RockmasteR]

did that happens before you installed XP SP3?

[TATAR]

ok Mcninjaguy...hmmm...that's odd i installed Driver Sweeper and cleaned my Ati drivers than installed new ones from here: http://game.amd.com/us-en/drivers_ca...=xp/radeonx-xp and i have an error message it says that Catalyst Control Centre could not be loaded...i done the cleaning again and tried to download from here: http://www.sapphiretech.com/presenta...id=309&pid=184 and it had the same result i mean the error message...now what?

[TATAR]

RockmasteR yes it happened before

[RockmasteR]

ok, restart your PC and install the video drivers from the CD that came with your card
and try the game again

[TATAR]

I installed the drivers from the videocard case and guess what...when the PC restarted i saw for a sec the blue screen of death...just nice...i preinstalled my WIndows and now i'll try it again with the drivers from my videocard case

[TATAR]

well...same result

[Mcninjaguy]

Hey Tatar!

I got your PM.
Some games require Windows Service Pack 3 to run.
I would say to make sure your system is stable before you run a new service pack on it.

This is the article to get rid of Service pack 3
http://support.microsoft.com/kb/950249

[TATAR]

thx :)

[TATAR]

ohhh i forgot i read this 2 days ago and it didn't help io don't have the service pack uninstaller i mean c:\windows\$NtServicePackUninstall$\spuninst\spuninst.exe...this file i don't have maybe coz i used CCleaner and checked the box "delete Hotfix Uninstallers"... is there any other way to remove my SP 3? ty

[KrossX]

Catalyst Control Center requires to have .NET framework 2.0 support installed.
You should run Windows Update and install it if you don't have it.

As for the error with the game. I remember having no issues with XP SP3 trying that game.. Did it run at least once? I remember some issue with GF8800+ and Bump Mapping
with that game, which should be disabled. (setted to low)

[TATAR]

KrossX well it didn't ran even once ;( i have .NET Framework 3.5 installed and i have the latest Sapphire drivers and DirectX 9.0c installed...and i tried on lowest;low;medium and high and even highets and it didn't work...i start the game it runs fine intros and stuff and then when i click New Game it loads..than stopps and disconnects me from the game that error message appears.

[Mcninjaguy]

What is your PSU (power supply unit)?

[TATAR]

Here is my PSU Mcninja guy: http://www.mostbg1.com/most/Item.aspx?itemid=33481...if u can't access the page pm me

[Mcninjaguy]

I would not use that PSU. Fortron does not make good PSU's

Before you buy a new PSU lets first see what your 12v says in your bios.

Corsair 650w (same price as Corsair 550w)
$100
after rebate $80
http://www.newegg.com/Product/Produc...82E16817139005

Have a look at my power supply and selection link in my signature.

[TATAR]

ok.i can buy a new one,but i don't think that's the reason...years ago i had it installed on my laptop here are his specs:
RAM - 512 GB Ram A-Data
Processor - Intel Pentium 4 2.4Ghz
HDD - Samsung 80GB
Videocard - Moblity Radeon 9000 64 Mb
Motherboard - don't know
and i runed SW Republic Commando without a problem and the video settings were on high

[KrossX]

Try a more demanding game, one that stresses your computer the most.
Then we'll see if it's a PSU issue.

I think it's just the game being picky on post Shader 2.0 hardware. =_="
I don't remember if the game uses D3D or OpenGL, most likely the first one.
If so, you could try using RivaTuner and limiting your shader version to 2.0
to see if that helps.

[TATAR]

i tried many demanding games..I'm playing NFS Undercover at the moment;i've tried Spider Man Web of Shadows;GTA 4;Warhamer 40000 II and many more well i can play them with no problem