dreamcast display problem

fried sock · 08-22-2009, 10:23 AM

I recently bought this dreamcast, and I scanned for a signal on my lcd tv and all of the 'white' colours had been replaced with black, and there was a loud buzzing whenever text appeared on the screen. I then tried the dreamcast on a crt tv and the picture was surprisingly fine for about five minutes, before reverting to the black-ish screen found on my lcd.
I have done a lot of searching for this kind of problem on the internet and found only one, which didnt have a solution, so please help.
thanks.

**5NIPER_WOLF** · 08-23-2009, 06:39 AM

Hello and welcome to TSF.

What kind of cable did you use to connect to the TV? You most likely need an RGB (Red White Yellow) cable to connect to a picturetube television.
I think just the sheer age of the Dreamcast meant that you bought an already dead system.

fried sock · 08-24-2009, 01:20 AM

I am using the original rf cable, but after doing even more research on the internet, I found that the problem is very likley to be the cable at fault, so I sent off for an av cable and Ill let you know how it goes....

fried sock · 08-26-2009, 10:17 AM

yep that new cable I got works a treat.

08-22-2009, 10:23 AM	#1 (permalink)
fried sock Registered User Join Date: Aug 2009 Posts: 7 OS: vista 32bit sp1	dreamcast display problem I recently bought this dreamcast, and I scanned for a signal on my lcd tv and all of the 'white' colours had been replaced with black, and there was a loud buzzing whenever text appeared on the screen. I then tried the dreamcast on a crt tv and the picture was surprisingly fine for about five minutes, before reverting to the black-ish screen found on my lcd. I have done a lot of searching for this kind of problem on the internet and found only one, which didnt have a solution, so please help. thanks.

08-23-2009, 06:39 AM	#2 (permalink)
5NIPER_WOLF TSF Enthusiast Join Date: Jan 2009 Location: Toronto Canada Posts: 3,975 OS: MS WinXP SP3. My System	Re: dreamcast display problem Hello and welcome to TSF. What kind of cable did you use to connect to the TV? You most likely need an RGB (Red White Yellow) cable to connect to a picturetube television. I think just the sheer age of the Dreamcast meant that you bought an already dead system.

08-24-2009, 01:20 AM	#3 (permalink)
fried sock Registered User Join Date: Aug 2009 Posts: 7 OS: vista 32bit sp1	Re: dreamcast display problem I am using the original rf cable, but after doing even more research on the internet, I found that the problem is very likley to be the cable at fault, so I sent off for an av cable and Ill let you know how it goes....

08-26-2009, 10:17 AM	#4 (permalink)
fried sock Registered User Join Date: Aug 2009 Posts: 7 OS: vista 32bit sp1	Re: dreamcast display problem yep that new cable I got works a treat.