Hi, im replacing the starter on my 95 Toyota Corolla and ran into a bit of a problem in removing the air cleaning assembly.
My first problem was the three bolts that hold the assembly in place. The first 2 came out, no problem. But the third one that connects to somewhere under the fuse box loosened up all the way and the threads are out, but I can't seem to pull the bolt out, something is keeping it in there. I worked on it for ten minutes and can't seem to get the darn thing out.
My second problem is probably a pretty easy one, but on the assembly 2 small ribbed rubber hoses run along both sides and have clamps keeping them alongside it. I dont know how to get the hoses out of the clamps. Googled it and can't find much.
Thanks for the help!
My first problem was the three bolts that hold the assembly in place. The first 2 came out, no problem. But the third one that connects to somewhere under the fuse box loosened up all the way and the threads are out, but I can't seem to pull the bolt out, something is keeping it in there. I worked on it for ten minutes and can't seem to get the darn thing out.
My second problem is probably a pretty easy one, but on the assembly 2 small ribbed rubber hoses run along both sides and have clamps keeping them alongside it. I dont know how to get the hoses out of the clamps. Googled it and can't find much.
Thanks for the help!