Ok so I have had this computer for years and ever since I changed my first motherboard, my front panel isn't connected due to multiple reasons(my lazyness, idiotic letters on the connectors etc.) so now I feel like its time I do it but I don't have a clue how!
I have attached a pic of my case connectors and instructions from my mobos manual cause I can't figure it out
So if anyone can help me out with these retarded case connectors I would be more than grateful
OUT2-R and OUT2-L are the headphone output. Stereo audio, left & right. OUT2-R and OUT2-L are the + pins, OUT-RET is the -. Unfortunately in your situation, without modifications, your case wiring won't work.
__________________
------------------------------------;
Google is your Friend!
What does the other side of the f_panel look like??? Where the wires connect to the jacks...
__________________ Please be advised. If your thread is answered and there is no reply within 30 days the thread will be closed. If you need continued assistance after that, please PM myself or another staff member to have the thread opened. Thank you.
I am about to go to sleep. Get that info to me and I will let you know what is possible.
-GZ
__________________ Please be advised. If your thread is answered and there is no reply within 30 days the thread will be closed. If you need continued assistance after that, please PM myself or another staff member to have the thread opened. Thank you.
yah I found the connectors but doesn't matter, the GND black wire got ripped off during the discovery, I guess I'll have to live without the front panel audio and mic
Don't give up on it... nothing a little solder won't cure!!!!
__________________ Please be advised. If your thread is answered and there is no reply within 30 days the thread will be closed. If you need continued assistance after that, please PM myself or another staff member to have the thread opened. Thank you.
