Need Help with Q-SEE QSDR74RTS internet setup

[CRTLMB]

I installed a Q-SEE QSDR74RTS DVR security system. Everyhting is up and running. I am now trying to be able to monitor my system through the internet, and on my Android phone.

I am having problems with port forwarding. Can someone be able to helpme? I can give you all of the information needed. I must have been trying for 4 hours already and can not figure it out.

I am running a Westell DSL modem (c90-610030) to a Belkin Wireless Router (f9k1103v1) .

Thanks in advance.
Carl ( crtlmb@aol.com )

[Phou]

Perhaps this link will get you started, I couldn't find the model of your router but I pick one that was close. Port Forwarding Qsee QSDR74RTS on the Belkin F9K1102v1 - PortForward.com

[CRTLMB]

Thanks. I already tried that. I forwarded the ports on my Belkin router as well as my Westell modem. When I go to chech to see if the ports are open, they are not. I can post pics of the settings of my modem, wireless router, and dvr network screen if that would help.

[Phou]

Originally Posted by CRTLMB

Thanks. I already tried that. I forwarded the ports on my Belkin router as well as my Westell modem. When I go to chech to see if the ports are open, they are not. I can post pics of the settings of my modem, wireless router, and dvr network screen if that would help.

Yea post some screenshots. Port forwarding on a modem doesn't sound right either, you only need to do it on the router unless the modem has a firewall.

[CRTLMB]

LAN Setup LAN Settings DHCP Client List Internet WAN Connection Type DNS MAC Address Wireless Channel and SSID Security Wi-Fi Protected Setup Guest Access Use as an Access Point Media Features Quality of Service Video Mover Firewall Virtual Servers MAC Address Filtering DMZ DDNS WAN Ping Blocking Security Log Utilities Restart Router Restore Factory Defaults Save/Backup Settings Restore Previous Settings Firmware Update System Settings Self-HealingFirewall > Virtual Servers
This function will allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your Router to your internal network. More Info

Clear entry 1234567891011121314151617181920all Enable Description Inbound port Type Private IP address Private port 1TCPUDPTCP&UDP192.168.2.2TCPUDPTCP&UDP192.168.2.3TCPUDPTCP&UDP192.168.2.4TCPUDPTCP&UDP192.168.2.5TCPUDPTCP&UDP192.168.2.6TCPUDPTCP&UDP192.168.2.7TCPUDPTCP&UDP192.168.2.8TCPUDPTCP&UDP192.168.2.9TCPUDPTCP&UDP192.168.2.10TCPUDPTCP&UDP192.168.2.11TCPUDPTCP&UDP192.168.2.12TCPUDPTCP&UDP192.168.2.13TCPUDPTCP&UDP192.168.2.14TCPUDPTCP&UDP192.168.2.15TCPUDPTCP&UDP192.168.2.16TCPUDPTCP&UDP192.168.2.17TCPUDPTCP&UDP192.168.2.18TCPUDPTCP&UDP192.168.2.19TCPUDPTCP&UDP192.168.2.20TCPUDPTCP&UDP192.168.2.
This is from the virtual server screen on my Belin Router.

I cleared everything from the Westell modem/router.

The settings on my Q-See Dvr is as follows:

Static

Media Port : 09000

Web Port : 00080

IP address : 192.168.002.006

Subnet mask : 255.255.255.000

Gateway : 192.168.002.001

DNS: 202.096.128.068


Let me know any additional you may need. Thanks in advance.

[Phou]

It appears that you are double NATed, the Westel modem is also a NAT device. This might be the cause of the problem. You should check the link below.

What is the proper way to configure a Westell modem with a generic router? AT&T Southeast Forum FAQ | DSLReports.com, ISP Information

Once you've done the above you can proceed with the port forwarding.

Port Forwarding Qsee QSDR74RTS on the Belkin F9K1102v1 - PortForward.com