Go Back   Tech Support Forum > Microsoft Support > BSOD, App Crashes And Hangs


[SOLVED] Bsod every shutdows / sleep / hibernate

This is a discussion on [SOLVED] Bsod every shutdows / sleep / hibernate within the BSOD, App Crashes And Hangs forums, part of the Tech Support Forum category.


Reply
 
Thread Tools Search this Thread
Old 10-01-2013, 05:50 PM   #1
Registered Member
 
Join Date: Oct 2013
Posts: 4
OS: Windows 8.1 Pro


Exclamation

Hi,

I am searching for couple of days and I am stuck.
Can anyone please help me with this ?


OS - Vista/ Windows 7 ? Win 8.1 pro
x86 (32-bit) or x64 ?64
What was original installed OS on system? 8.0
Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? retail
Age of system (hardware) 1 week
Age of OS installation - have you re-installed the OS? 1 week


Attached are the files.

Windows7_Vista_jcgriff2.zip
PerfMon20131001-000003.zip

The IRQ error minidump is from driver verifier.
rolek is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 10-03-2013, 07:12 PM   #2
Registered Member
 
Join Date: Oct 2013
Posts: 4
OS: Windows 8.1 Pro



anyone?
rolek is offline   Reply With Quote
Old 10-03-2013, 10:47 PM   #3
TSF Enthusiast
 
Patrick's Avatar

Microsoft Most Valuable Professional
 
Join Date: Apr 2012
Location: Ring 0
Posts: 4,349
OS: W8.1 x64



Hi,

Sorry, we've all been quite busy!

In regards to the perfmon:

Quote:
Symptom:
Device is disabled.
Cause: A device is disabled preventing it from working properly.
Details: The device, Insyde Airplane Mode HID Mini-Driver, is disabled. If this device is no longer used it may be intentionally disabled. The Plug and Play ID for this device is ACPI\PNPC000\1.
Resolution: 1. Determine if you need the device.
2. If you need the device, enable it in Device Manager.
3. If you do not use the device it can be left disabled.
^^ Is this disabled on purpose?

Onto the dumps, we have two bugchecks:

DRIVER_POWER_STATE_FAILURE (9f)

This bug check indicates that the driver is in an inconsistent or invalid power state.

By default, the dumps are faulting pci.sys which is the NT Plug and Play PCI Enumerator system driver (not the true cause and is being faulted by something else).

If we run an !irp on the 4th parameter of the bugcheck (blocked IRP address), we get the following:

>[ 16, 2] 0 e1 ffffe000139c2050 00000000 fffff80057fe3054-ffffe00017f3f980 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt630x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt630x64.sys

^^ Rt630x64.sys is the Realtek PCI/PCIe Adapters driver.

Ensure this driver is up to date - Realtek

If no update available or if it does not help:

Norton Windows 8:

Remove and replace Norton with Windows 8's built-in Windows Defender for temporary troubleshooting purposes:

Norton removal tool - https://support.norton.com/sp/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;jsessionid=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&pvid=f-home

If updating driver and removing Norton does not help, enable Driver Verifier:

Driver Verifier:

What is Driver Verifier?

Driver Verifier is included in Windows 8, 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Windows 2000, Windows XP, and Windows Server 2003 to promote stability and reliability; you can use this tool to troubleshoot driver issues. Windows kernel-mode components can cause system corruption or system failures as a result of an improperly written driver, such as an earlier version of a Windows Driver Model (WDM) driver.

Essentially, if there's a 3rd party driver believed to be at issue, enabling Driver Verifier will help flush out the rogue driver if it detects a violation.

Before enabling Driver Verifier, it is recommended to create a System Restore Point:

Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | select "Create a Restore Point"
Windows 8 - Restore Point - Create in Windows 8

How to enable Driver Verifier:

Start > type "verifier" without the quotes > Select the following options -

1. Select - "Create custom settings (for code developers)"
2. Select - "Select individual settings from a full list"
3. Check the following boxes -
- Special Pool
- Pool Tracking
- Force IRQL Checking
- Deadlock Detection
- Security Checks (Windows 7 & 8)
- DDI compliance checking (Windows 8)
- Miscellaneous Checks
4. Select - "Select driver names from a list"
5. Click on the "Provider" tab. This will sort all of the drivers by the provider.
6. Check EVERY box that is NOT provided by Microsoft / Microsoft Corporation.
7. Click on Finish.
8. Restart.

Important information regarding Driver Verifier:

- If Driver Verifier finds a violation, the system will BSOD.

- After enabling Driver Verifier and restarting the system, depending on the culprit, if for example the driver is on start-up, you may not be able to get back into normal Windows because Driver Verifier will flag it, and as stated above, that will cause / force a BSOD.

If this happens, do not panic, do the following:

- Boot into Safe Mode by repeatedly tapping the F8 key during boot-up.

- Once in Safe Mode - Start > type "system restore" without the quotes.

- Choose the restore point you created earlier.
If you did not set up a restore point, do not worry, you can still disable Driver Verifier to get back into normal Windows:

- Start > Search > type "cmd" without the quotes.

- To turn off Driver Verifier, type in cmd "verifier /reset" without the quotes.
・ Restart and boot into normal Windows.

How long should I keep Driver Verifier enabled for?

It varies, many experts and analysts have different recommendations. Personally, I recommend keeping it enabled for at least 24 hours. If you don't BSOD by then, disable Driver Verifier.

My system BSOD'd, where can I find the crash dumps?

They will be located in %systemroot%\Minidump

Any other questions can most likely be answered by this article:
Using Driver Verifier to identify issues with Windows drivers for advanced users

Regards,

Patrick
Patrick is offline   Reply With Quote
Old 10-04-2013, 07:31 AM   #4
Registered Member
 
Join Date: Oct 2013
Posts: 4
OS: Windows 8.1 Pro



Hello,

Thank you for reply.

The airplane mode device was disabled on purpose, due to lacking windows 8.1 driver and a conflicting state.

When I enabled the driver verifier, I got that IRQ not less or equal error + dump (in the zip file). Windows did not boot anymore, BSOD everytime.

I will try getting the drivers and do everything else you mentioned.

PS. Is there any tutorial / guide how to get to the information you have found ? Essentially, how to diagnose those minidumps ? BlueScreenView does not really help (or I dont know how to read that)
rolek is offline   Reply With Quote
Old 10-04-2013, 12:38 PM   #5
TSF Enthusiast
 
Patrick's Avatar

Microsoft Most Valuable Professional
 
Join Date: Apr 2012
Location: Ring 0
Posts: 4,349
OS: W8.1 x64



Keep me updated.

Quote:
Is there any tutorial / guide how to get to the information you have found ?
No, unfortunately. There are 'guides', but as far analyzing them goes it's a science, really. I've been doing it for a long time.

If you'd like to start learning - BSOD Kernel Dump Analysis Debugging Information - Sysnative Forums

Here are good books:

http://www.amazon.com/exec/obidos/redirect?link_code=ur2&camp=1789&tag=connorswebguidec&creative=9325&path=http://www.amazon.com/gp/redirect.html?ie=UTF8&linkCode=ur2&camp=1789&creative=9325&tag=overclockdotnet-20&location=http%3A%2F%2Fwww.amazon.com%2FWindows-Internals-Part-Covering-Server%2Fdp%2F0735648735%2Fref%3Dsr_1_1%3Fie%3DUTF8%26qid%3D1336860755%26sr%3D8-1
http://www.amazon.com/exec/obidos/redirect?link_code=ur2&camp=1789&tag=connorswebguidec&creative=9325&path=http://www.amazon.com/Windows-Internals-Part-Covering-Server/dp/0735665877
http://www.amazon.com/exec/obidos/redirect?link_code=ur2&camp=1789&tag=connorswebguidec&creative=9325&path=http://www.amazon.com/Advanced-Windows-Debugging-Mario-Hewardt/dp/0321374460
Regards,

Patrick
Patrick is offline   Reply With Quote
Old 10-05-2013, 02:02 PM   #6
Registered Member
 
Join Date: Oct 2013
Posts: 4
OS: Windows 8.1 Pro



OK.

So... there is no official driver yet.... I will disable the device in device manager for now, which in theory should solve the problem for now. I will have to live with that until Realtek releases a driver for Win 8.1

Thanks for the links, I will be able to find the issues with drivers myself now.
rolek is offline   Reply With Quote
Old 10-05-2013, 05:24 PM   #7
TSF Enthusiast
 
Patrick's Avatar

Microsoft Most Valuable Professional
 
Join Date: Apr 2012
Location: Ring 0
Posts: 4,349
OS: W8.1 x64



Hi,

My pleasure. Marked as solved since you've got it all worked out.

Regards,

Patrick
Patrick is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
DRIVER POWER STATE FAILURE Sleep mode BSOD.
Hey! I got an BSOD from sleep mode. Was off to go outside the summer heat today and when I came back... BSOD.. However the system managed to dump two files for me on BSOD. Take a look and thanks for the help you give me :)
yoggi BSOD, App Crashes And Hangs 2 05-10-2013 04:53 PM
Hibernate and Sleep command line prompts not working
Hibernate and Sleep command prompts not working I have created command prompt shortcuts for Shutdown, Restart, Hibernate and Sleep in Windows 8. Shutdown and Restart work fine. I created two icons: Sleep: (,,,SetSuspendState 0,1,0) and Hibernate: (,,,SetSuspendState hibernate) If I enable...
ppisciot Windows 8, 8.1 Support 4 01-30-2013 07:28 PM
BSOD after sleep
Hi I have a problem, I just got my laptop few weeks ago. I get bsod everytime I put my laptop to sleep or hibernate. it says on the blue screen bugcode_usb_drive, but I dont think there is something wrong with my usb driver. I have formatted my laptop, disabled all the usb driver, run alienautopsy...
faizzulmustapha Windows 7 , Windows Vista Support 1 11-08-2012 07:11 PM
Problem with manual sleep and hibernate mode
I recently built a new system. Everything runs good but for some reason it wont automatically go to sleep or hibernate correctly. It doesn't work properly when I tell it to manually sleep or hibernate either. I believe the problem may be my power supply. It is a Corsair tx750w. I installed this...
wtfishappening RAM and Power Supply Support 2 02-23-2011 11:28 AM
any downside to leaving laptop in sleep mode rather than hibernate?
Hi---I have a Toshiba Portege, late model, ultra portable. I have a tendency to forget to completely shut down--neither a cold shutdown, nor even a hibernate. Instead, I tend to leave it in "sleep" mode, the lesser shutdown, with the little orange light gradually blinking to so indicate. i...
monsieurms Laptop Support 6 01-15-2011 01:42 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is on
Smilies are on
[IMG] code is on
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Post a Question


» Site Navigation
 > FAQ
  > 10.0.0.2


All times are GMT -7. The time now is 10:31 AM.


vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 2001 - 2015, Tech Support Forum

Windows 7 - Windows XP - Windows Vista - Trojan Removal - Spyware Removal - Virus Removal - Networking - Security - Top Web Hosts

 

Partially Powered By Products Found At Lampwrights.com