After 48 hours, Bump.

 

hal.dll errors are usually compatibility issues, but may also be caused by hardware problems. What older programs and devices do you have installed on your system?

The perfmon report shows that your SMBus Controller isn't installed. Please visit the PC manufacturer's website and install the chipset drivers and the SMBus driver for your system.

MSINFO32 reports a whole stack of STOP 0x117 errors (video related) - from early July. It also reports a whole bunch of STOP 0xD1 errors related to your network card - which are the most recent. There are no hal.dll error reported - I suspect that this is a glitch/limitation with BlueScreenView (we've had similar problems with it)

I see both Microsoft Security Essentials and BullGuard installed. Please remove BullGuard (reasons are given further on in this post). Ensure that Microsoft Security Essentials is updated and active (you may need to uninstall/reinstall it to get it to work properly) and that the Windows Firewall is turned on. Never have more than 1 antivirus or 1 firewall running at the same time. I see some evidence that this might be firewall related, so please double check that you only have 1 firewall and one anti-virus running.

I would start with updating your network drivers, and removing the programs associated with afw.sys and NSNetmon.sys. The afw.sys file is associated with the Agnitum Firewall Driver. It's possible that BullGuard has licensed this firewall for it's own use. The NSNetmon.sys driver is most likely associated with a NovaShield Network Monitoring program - and there are indications that it's a part of BullGuard also.

FIRST - Make a System Restore Point.
SECOND - Get a Startup Repair disk. See the suggestions at this link: Create a Recovery Disc - Vista Forums
Then uninstall the BullGaurd program

Then use this free tool (at the bottom of the page) to remove any remnants that were left behind: BullGuard Antivirus, Antispyware, Firewall, Spamfilter, Backup and Support - all the security you need in one package!

Then check to see that afw.sys and NSNetmon.sys have been removed from C:\Windows\System32\drivers (DO NOT remove them yourself - it can stop your system from booting!)

Then update your networking drivers from the device manufacturer's website

Next are these free diagnostics and stress tests (please let us know the results once you're done) They're probably not necessary - but there's not harm in running them as long as you follow the directions precisely.:

I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks

Then, if the above tests pass, I'd try these free stress tests:

FurMark download site: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
NOTE: Set the alarm to go off at 90ºC. Then watch the system from that point on. If the system doesn't display a temperature, watch it constantly and turn it off at the first sign of video problems. DO NOT leave it it unmonitored, it can DAMAGE your video card!!!
If the temperature gets above 105ºC, quit the test - the video card is overheating.
- Click "Quit" to exit

Prime95 download site: Free Software - GIMPS
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
Monitor the CPU temperature and DON'T let it exceed 85ºC. If it does, then you probably have a CPU cooling problem.
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.
More details on the use of this test: Torture test your CPU with Prime95

BSOD BUGCHECK SUMMARY

[font=lucida console]
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini082011-01.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Sat Aug 20 04:39:47.739 2011 (UTC - 4:00)
System Uptime: 0 days 0:42:43.551
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  uTorrent.exe
FAILURE_BUCKET_ID:  0xA_L1E60x86+5bca
Bugcheck code 0000000A
Arguments b0924a95 00000002 00000000 81a241af
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini080611-01.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Sat Aug  6 05:23:43.819 2011 (UTC - 4:00)
System Uptime: 0 days 12:04:56.361
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  uTorrent.exe
FAILURE_BUCKET_ID:  0xA_L1E60x86+5bca
Bugcheck code 0000000A
Arguments 00000027 00000002 00000000 81a131af
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini080511-03.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Fri Aug  5 17:18:11.298 2011 (UTC - 4:00)
System Uptime: 0 days 2:09:40.782
BugCheck D1, {14, 2, 0, 89a77500}
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  stdrt.exe
FAILURE_BUCKET_ID:  0xD1_L1E60x86+5bca
Bugcheck code 000000D1
Arguments 00000014 00000002 00000000 89a77500
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini080511-02.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Fri Aug  5 15:07:50.876 2011 (UTC - 4:00)
System Uptime: 0 days 0:26:03.005
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  javaw.exe
FAILURE_BUCKET_ID:  0xA_L1E60x86+5bca
Bugcheck code 0000000A
Arguments 00000027 00000002 00000000 81a1e1af
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini080511-01.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Fri Aug  5 14:41:08.836 2011 (UTC - 4:00)
System Uptime: 0 days 1:07:30.107
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  uTorrent.exe
FAILURE_BUCKET_ID:  0xA_L1E60x86+5bca
Bugcheck code 0000000A
Arguments 66553847 00000002 00000000 81dc11af
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini080211-02.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Tue Aug  2 08:16:13.377 2011 (UTC - 4:00)
System Uptime: 0 days 0:05:45.436
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  csrss.exe
FAILURE_BUCKET_ID:  0xA_L1E60x86+5bca
Bugcheck code 0000000A
Arguments 00000054 00000002 00000000 81dc61af
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini080211-01.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Tue Aug  2 08:09:48.649 2011 (UTC - 4:00)
System Uptime: 0 days 2:43:35.878
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  uTorrent.exe
FAILURE_BUCKET_ID:  0xA_L1E60x86+5bca
Bugcheck code 0000000A
Arguments 20303346 00000002 00000000 81a161af
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini080111-03.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Mon Aug  1 17:39:23.408 2011 (UTC - 4:00)
System Uptime: 0 days 2:56:23.679
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  svchost.exe
FAILURE_BUCKET_ID:  0xA_L1E60x86+5bca
Bugcheck code 0000000A
Arguments 2e697079 00000002 00000000 81dd51af
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini080111-02.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Mon Aug  1 14:42:27.040 2011 (UTC - 4:00)
System Uptime: 0 days 0:26:20.796
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  stdrt.exe
FAILURE_BUCKET_ID:  0xA_L1E60x86+5bca
Bugcheck code 0000000A
Arguments 000be086 00000002 00000000 81dc11af
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini080111-01.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Mon Aug  1 14:15:20.574 2011 (UTC - 4:00)
System Uptime: 1 days 3:39:50.135
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  opera.exe
FAILURE_BUCKET_ID:  0xA_L1E60x86+5bca
Bugcheck code 0000000A
Arguments b6bb01b3 00000002 00000000 81a161af
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini073111-02.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Sun Jul 31 10:34:43.281 2011 (UTC - 4:00)
System Uptime: 0 days 0:47:33.478
BugCheck D1, {51cd, 2, 0, 89cac26c}
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5b3a )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xD1_L1E60x86+5b3a
Bugcheck code 000000D1
Arguments 000051cd 00000002 00000000 89cac26c
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini073111-01.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Sun Jul 31 09:46:31.919 2011 (UTC - 4:00)
System Uptime: 0 days 4:28:18.881
BugCheck D1, {14, 2, 0, 89a77500}
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  uTorrent.exe
FAILURE_BUCKET_ID:  0xD1_L1E60x86+5bca
Bugcheck code 000000D1
Arguments 00000014 00000002 00000000 89a77500
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini072611-04.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Tue Jul 26 17:50:44.547 2011 (UTC - 4:00)
System Uptime: 0 days 8:31:46.336
BugCheck D1, {1ad1, 2, 0, 89cb026c}
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5b3a )
DEFAULT_BUCKET_ID:  COMMON_SYSTEM_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  chrome.exe
FAILURE_BUCKET_ID:  0xD1_L1E60x86+5b3a
Bugcheck code 000000D1
Arguments 00001ad1 00000002 00000000 89cb026c
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini072611-03.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Tue Jul 26 09:18:15.577 2011 (UTC - 4:00)
System Uptime: 0 days 1:30:12.927
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
Probably caused by : L1E60x86.sys ( L1E60x86+5bca )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xA_L1E60x86+5bca
Bugcheck code 0000000A
Arguments 00000017 00000002 00000000 81a221af
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini072611-02.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Tue Jul 26 06:52:22.597 2011 (UTC - 4:00)
System Uptime: 0 days 0:52:03.809
BugCheck D1, {d5898ef8, 2, 0, 907e5f5b}
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+4f5b )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  uTorrent.exe
FAILURE_BUCKET_ID:  0xD1_L1E60x86+4f5b
Bugcheck code 000000D1
Arguments d5898ef8 00000002 00000000 907e5f5b
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini072611-01.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Tue Jul 26 05:59:10.970 2011 (UTC - 4:00)
System Uptime: 0 days 0:07:58.657
BugCheck D1, {94e, 2, 0, 8e9ebf5b}
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
Probably caused by : L1E60x86.sys ( L1E60x86+4f5b )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  0xD1_L1E60x86+4f5b
Bugcheck code 000000D1
Arguments 0000094e 00000002 00000000 8e9ebf5b
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini072411-02.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Sun Jul 24 14:29:14.115 2011 (UTC - 4:00)
System Uptime: 0 days 0:19:37.845
BugCheck D1, {940214, 2, 0, 8e7e7f5b}
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+4f5b )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  uTorrent.exe
FAILURE_BUCKET_ID:  0xD1_L1E60x86+4f5b
Bugcheck code 000000D1
Arguments 00940214 00000002 00000000 8e7e7f5b
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini072411-01.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Sun Jul 24 13:15:50.219 2011 (UTC - 4:00)
System Uptime: 0 days 0:34:24.997
BugCheck D1, {14, 2, 0, 82682500}
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+66c5 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  uTorrent.exe
FAILURE_BUCKET_ID:  0xD1_L1E60x86+66c5
Bugcheck code 000000D1
Arguments 00000014 00000002 00000000 82682500
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini072011-01.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Tue Jul 19 18:13:39.020 2011 (UTC - 4:00)
System Uptime: 0 days 0:24:21.494
BugCheck D1, {11000018, 2, 0, 8fde6f5b}
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+4f5b )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  svchost.exe
FAILURE_BUCKET_ID:  0xD1_L1E60x86+4f5b
Bugcheck code 000000D1
Arguments 11000018 00000002 00000000 8fde6f5b
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\Mini071911-01.dmp]
Built by: 6002.18327.x86fre.vistasp2_gdr.101014-0432
Debug session time: Tue Jul 19 17:48:00.624 2011 (UTC - 4:00)
System Uptime: 0 days 4:04:39.342
BugCheck D1, {14, 2, 0, 8267c500}
*** WARNING: Unable to verify timestamp for L1E60x86.sys
*** ERROR: Module load completed but symbols could not be loaded for L1E60x86.sys
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
*** WARNING: Unable to verify timestamp for NSNetmon.sys
*** ERROR: Module load completed but symbols could not be loaded for NSNetmon.sys
Probably caused by : L1E60x86.sys ( L1E60x86+66c5 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  uTorrent.exe
FAILURE_BUCKET_ID:  0xD1_L1E60x86+66c5
Bugcheck code 000000D1
Arguments 00000014 00000002 00000000 8267c500
BiosVersion = 1101   
BiosReleaseDate = 07/18/2008
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz"
MaxSpeed:     2400
CurrentSpeed: 2400
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  
  [/font]

 

Thx for your reply! I will look into this in the weekend since I'm not the proud owner of free time right now!