Tech Support Forum banner
Cancel
Create thread New Forums
Status
Not open for further replies.

BSOD on Clean install of Vista on Lenovo laptop

Jump to Latest
1.9K views 1 reply 2 participants last post by  jcgriff2  
D
#1 · (Edited)
Hi

I keep getting BSOD when my laptop awakes from sleep. This has appeared after I performed a clean install using the lenovo recovery discs. Sometimes its a blue screen with scribbles like the words aren't displayed correctly.
I have installed all windows updates and have tried to update the drivers for display adapter and network cards from the Lenovo site.

System
Lenovo 3000 C200 8922 BXG
Vista Home premium 32 bit

I have attached the 2 files as per the BSOD sticky.

Thanks for any help
 

Attachments

#2 · (Edited)
Hi -

The bugchecks on the 8 dumps - all the same -

0xa = driver attempted to access pageable memory when it should not have (IRQL too high).

You are running Vista SP0 - the original version of Vista, circa Nov 2006. You need to allow Windows Updates to install SP1, then SP2. I do see that 114 Windows Updates came in, but SP1 was not among them. Please note that SP2 is not inclusive of SP1 as it was under XP. Sine the install is only a few days old, re-install Vista again. Make sure your Internet router is on and broadcasting a wifi signal; if not connect via Ethernet during OS re-install.

Once at Desktop, double-check Windows Updates --> www.update.microsoft.com

Go to Lenovo Support and install any outstanding driver updates -

Lenovo Support --> http://www-307.ibm.com/pc/support/s...ndingpages/productPageLandingPage.vm&operatingsystemind=49979&machineind=338521

Then update these device drivers by going directly to device manufacturer's web site -

Mobile Intel(R) 945 Express Chipset --> http://downloadcenter.intel.com/Sea...&ProductLine=Netbooks&ProductProduct=Mobile+Intel®+945GM+Express+Chipset+Family
Intel 3945ABG wifi driver --> http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18406&lang=eng
Relatek HD Audio --> http://www.realtek.com.tw/DOWNLOADS...dsCheck.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false
Synaptics Touchpad --> http://www.synaptics.com/support/drivers
Realtek RTL8139/810x Family Fast Ethernet NIC --> http://www.realtek.com.tw/downloads...loadsView.aspx?Langid=1&PNid=6&PFid=6&Level=5&Conn=4&DownTypeID=3&GetDown=false

Regards. . .

jcgriff2

.


BUGCHECK SUMMARY
Code: 
[font=lucida console]  
Windows Vista Kernel Version 6000 MP (2 procs) Free x86 compatible
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Debug session time: Sat Mar 13 22:31:52.110 2010 (GMT-5)
System Uptime: 0 days 17:56:25.046
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck A, {16, 1b, 0, 81c281e2}
*** WARNING: Unable to verify timestamp for LPCFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for LPCFilter.sys
*** WARNING: Unable to verify timestamp for bdselfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for bdselfpr.sys
Probably caused by : LPCFilter.sys ( LPCFilter+102e )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Debug session time: Sat Mar 13 04:34:10.284 2010 (GMT-5)
System Uptime: 0 days 17:14:06.587
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck A, {16, 1b, 0, 81c281e2}
*** WARNING: Unable to verify timestamp for LPCFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for LPCFilter.sys
*** WARNING: Unable to verify timestamp for bdselfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for bdselfpr.sys
Probably caused by : LPCFilter.sys ( LPCFilter+102e )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Debug session time: Fri Mar 12 11:19:25.435 2010 (GMT-5)
System Uptime: 0 days 5:48:58.337
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck A, {16, 1b, 0, 81c281e2}
*** WARNING: Unable to verify timestamp for LPCFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for LPCFilter.sys
*** WARNING: Unable to verify timestamp for bdselfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for bdselfpr.sys
Probably caused by : LPCFilter.sys ( LPCFilter+102e )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Debug session time: Fri Mar 12 05:30:03.827 2010 (GMT-5)
System Uptime: 0 days 7:28:50.592
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck A, {16, 1b, 0, 81c281e2}
*** WARNING: Unable to verify timestamp for LPCFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for LPCFilter.sys
*** WARNING: Unable to verify timestamp for bdselfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for bdselfpr.sys
Probably caused by : LPCFilter.sys ( LPCFilter+102e )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Debug session time: Thu Mar 11 22:00:21.014 2010 (GMT-5)
System Uptime: 0 days 5:24:56.725
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck A, {16, 1b, 0, 81c281e2}
*** WARNING: Unable to verify timestamp for LPCFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for LPCFilter.sys
*** WARNING: Unable to verify timestamp for bdselfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for bdselfpr.sys
Probably caused by : LPCFilter.sys ( LPCFilter+102e )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Debug session time: Thu Mar 11 16:30:38.060 2010 (GMT-5)
System Uptime: 0 days 0:03:39.779
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck A, {16, 1b, 0, 81c281e2}
*** WARNING: Unable to verify timestamp for LPCFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for LPCFilter.sys
*** WARNING: Unable to verify timestamp for bdselfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for bdselfpr.sys
Probably caused by : LPCFilter.sys ( LPCFilter+102e )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Debug session time: Thu Mar 11 16:26:32.069 2010 (GMT-5)
System Uptime: 0 days 0:07:25.772
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck A, {16, 1b, 0, 81c281e2}
*** WARNING: Unable to verify timestamp for LPCFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for LPCFilter.sys
*** WARNING: Unable to verify timestamp for bdselfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for bdselfpr.sys
Probably caused by : LPCFilter.sys ( LPCFilter+102e )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Debug session time: Thu Mar 11 14:12:19.094 2010 (GMT-5)
System Uptime: 0 days 0:03:02.798
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck A, {16, 1b, 0, 81c281e2}
*** WARNING: Unable to verify timestamp for LPCFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for LPCFilter.sys
*** WARNING: Unable to verify timestamp for bdselfpr.sys
*** ERROR: Module load completed but symbols could not be loaded for bdselfpr.sys
Probably caused by : LPCFilter.sys ( LPCFilter+102e )
BUGCHECK_STR:  0xA
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨

by [color=red]jcgriff2   
  
J. C. Griffith, Microsoft MVP[/color] 

¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ 
[/font]
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Tech Support Forum
posts
4.8M
members
966K
Since
2002
A forum community dedicated to tech experts and enthusiasts. Come join the discussion about articles, computer security, Mac, Microsoft, Linux, hardware, networking, gaming, reviews, accessories, and more!
Full Forum Listing
Explore Our Forums
Windows 7 , Windows Vista Support Motherboards, Bios|UEFI & CPU Networking Support Hard Drive & SSD Support PC Gaming Support